Authorize.net Connection Details

Introduction

Connector Version

This documentation is based on version 21.0.8662 of the connector.

Get Started

Authorize.net Version Support

Latest version of Authorize.net API, consisting of Transaction Reporting and Customer Profiles endpoints.

Establish a Connection

You can obtain the necessary connection values by logging into your Merchant account and clicking Account -> Settings. The LoginID and TransactionKey are then displayed in the Security Settings section.

• LoginID: The API login ID associated with your payment gateway account. This property is used to authenticate that you are authorized to submit website transactions. Note that this value is not the same as the login ID that you use to log in to the Merchant Interface.
• TransactionKey: The transaction key associated with your payment gateway account. This property is used to authenticate that you are authorized to submit website transactions.
• UseSandbox: The Authorize.net API to be used to process transactions. If you are using a production account, this property can be left blank. If you are using a developer test account, set this to 'TRUE'.

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Authorize.net connector.

User Defined Views

The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

User Defined Views

The Jitterbit Connector for Authorize.net allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

• Create a JSON-formatted configuration file defining the views you want.
• DDL statements.

Define Views Using a Configuration File

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM SettledBatchList WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Schema for User Defined Views

User Defined Views are exposed in the UserViews schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName property.

Work with User Defined Views

For example, a SQL statement with a User Defined View called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Data Model

The Jitterbit Connector for Authorize.net models the Authorize.net API as relational views, or read-only tables. These are defined in schema files, which are simple, text-based configuration files.

API limitations and requirements are documented in this section; you can use the SupportEnhancedSQL feature, set by default, to circumvent most of these limitations.

Views

Views are composed of columns and pseudo columns. Views are similar to tables in the way that data is represented; however, views do not support updates. Entities that are represented as views are typically read-only entities. Often, a stored procedure is available to update the data if such functionality is applicable to the data source.

Queries can be executed against a view as if it were a normal table, and the data that comes back is similar in that regard. To find out more about tables and stored procedures, please navigate to their corresponding entries in this help document.

Jitterbit Connector for Authorize.net Views

BatchStatistics

Query BatchStatistics for an Authorize.net merchant account.

Table Specific Information

The BatchId is the only available supported column in the WHERE clause and it is required to retrieve results from BatchStatistics. BatchId can be used with (=) or IN operator.

SELECT * FROM BatchStatistics WHERE BatchId = '236274'

SELECT * FROM BatchStatistics WHERE BatchId IN ('236274', '237832')

Columns

CustomerProfileDetails

Query Customer Profile Details for Authorize.net merchant account.

Table Specific Information

The CustomerProfileId is the only available supported column in the WHERE clause and it is required to retrieve results from CustomerProfileDetails. CustomerProfileId can be used with (=) or IN operator.

SELECT * FROM CustomerProfileDetails WHERE CustomerProfileId='1915622429'

SELECT * FROM CustomerProfileDetails WHERE CustomerProfileId IN ('1915622429','3215422449')

Columns

CustomerProfiles

Query Customer Profile IDs for Authorize.net merchant account.

Columns

CustomerProfileTransactionList

Query Transactions in a batch for an Authorize.net merchant account.

Table Specific Information

The CustomerProfileId is the only available supported column in the WHERE clause and it is required to retrieve results from CustomerProfileTransactionList. CustomerProfileId can be used with the (=) or IN operator.

SELECT * FROM TransactionList WHERE CustomerProfileId='1915622429'

SELECT * FROM TransactionList WHERE CustomerProfileId IN ('1915622429', '3543535')

Columns

SettledBatchList

Query settled batches for an Authorize.net merchant account.

Table Specific Information

The following columns can be specified in the WHERE clause for the SettledBatchList table: IncludeStatistics and SettlementTime. SettlementTime supports the >, >=, <= and < operators and can be used to specify a range. The default date range is from UTC January 1 two years before the current year until the current time. If SettlementTime is not set as a range the query will return the previous or next 31 days depending on the used operator. IncludeStatistics is false by default. If you set 'IncludeStatistics=true', then statistics are included for the entire range, including the first and last SettlementTime dates. Columns that are statistics have the property 'Statistic = True' in the table below.

SELECT * FROM SettledBatchList WHERE SettlementTime>'2014-09-01' AND SettlementTime<'2014-09-20' AND IncludeStatistics='false'

Get data from the last January 1 two years before the current year to the current time.

SELECT * FROM SettledBatchList

Get data after the SettlementTime value.

SELECT * FROM SettledBatchList WHERE SettlementTime > '2014-09-01'

Get data before the SettlementTime value.

SELECT * FROM SettledBatchList WHERE SettlementTime <= '2014-09-01'

Columns

Pseudo-Columns

TransactionDetailItems

Query TransactionDetails to retrieve Items for an Authorize.net merchant account.

Table Specific Information

The TransId is the only available supported column in the WHERE clause and it is required to retrieve results from TransactionDetailItems. TransId can be used with the (=) or IN operator.

SELECT * FROM TransactionDetailItems WHERE TransId='23478353'

SELECT * FROM TransactionDetailItems WHERE TransId IN ('23478353', '23479147')

Columns

TransactionDetails

Query TransactionDetails for an Authorize.net merchant account.

Table Specific Information

The TransId is the only available supported column in the WHERE clause and it is required to retrieve results from TransactionDetails. TransId can be used with the (=) or IN operator.

SELECT * FROM TransactionDetails WHERE TransId='23478353'

SELECT * FROM TransactionDetails WHERE TransId IN ('23478353', '23479147')

Columns

TransactionList

Query Transactions in a batch for an Authorize.net merchant account.

Table Specific Information

The BatchId is the only available supported column in the WHERE clause and it is required to retrieve results from TransactionList. BatchId can be used with the (=) or IN operator.

SELECT * FROM TransactionList WHERE BatchId='35353'

SELECT * FROM TransactionList WHERE BatchId IN ('35353', '34219')

Columns

UnsettledTransactionList

Query Unsettled Transactions for an Authorize.net merchant account.

Table Specific Information

This table does not support any columns in the WHERE clause.

SELECT * FROM UnsettledTransactionList

Columns

Stored Procedures

Stored procedures are available to complement the data available from the Data Model. It may be necessary to update data available from a view using a stored procedure because the data does not provide for direct, table-like, two-way updates. In these situations, the retrieval of the data is done using the appropriate view or table, while the update is done by calling a stored procedure. Stored procedures take a list of parameters and return back a dataset that contains the collection of tuples that constitute the response.

Jitterbit Connector for Authorize.net Stored Procedures

CaptureTransaction

Use this procedure to capture funds for a transaction that was previously authorized using the ChargeCreditCard stored procedure.

You must specify values for the TransId and Amount fields.

Input

Result Set Columns

ChargeCreditCard

Use this method to authorize and capture a credit card payment.

Indexed parameters facilitate providing multiple instances a single parameter as inputs for the procedure.

Suppose there is an input parameter named Param#. Input multiple instances of an indexed parameter like this:

EXEC ProcedureName Param#1 = "value1", Param#2 = "value2", Param#3 = "value3"

Input

Result Set Columns

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Authorize.net:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the SettledBatchList table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='SettledBatchList'

Columns

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2

Columns

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the SettledBatchList table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='SettledBatchList'

Columns

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:authorizenet:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Collaborative Query Processing

When working with data sources that do not support SQL-92, you can query the sys_sqlinfo view to determine the query capabilities of the underlying APIs, expressed in SQL syntax. The connector offloads as much of the SELECT statement processing as possible to the server and then processes the rest of the query in memory.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. The following result set indicates the SELECT functionality that the connector can offload to the data source or process client side. Your data source may support additional SQL syntax. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name='SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

SSL

Schema

Miscellaneous

Authentication

This section provides a complete list of authentication properties you can configure.

LoginID

The Authorize.net Login Id.

Data Type

string

Default Value

""

Remarks

The API login ID associated with your payment gateway account. This property is found in the Security Settings under Account -> Settings and is used to authenticate that you are authorized to submit website transactions. Note that this value is not the same as the login ID that you use to log in to the Merchant Interface.

TransactionKey

The Authorize.net transaction key.

Data Type

string

Default Value

""

Remarks

The transaction key associated with your payment gateway account. This property is found in the Security Settings under Account -> Settings and is used to authenticate that you are authorized to submit website transactions.

UseSandbox

A boolean indicating if you are using a Sandbox account. The provider makes requests to the production environment by default.

Data Type

bool

Default Value

false

Remarks

The Authorize.net API to be used to process transactions. If you are using a production account, this property can be left blank. If you are using a developer test account, set this to 'TRUE'.

SSL

This section provides a complete list of SSL properties you can configure.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\AuthorizeNet Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\AuthorizeNet Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

MaxRows

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.