GraphQL Connection Details¶
Introduction¶
Connector Version
This documentation is based on version 21.0.8662 of the connector.
Important
We recommend using the GraphQL v2 connector to connect to GraphQL as it allows for additional configuration properties.
Get Started¶
GraphQL Version Support
The connector leverages the GraphQL API to enable bidirectional access to GraphQL.
Establish a Connection¶
Connect to GraphQL¶
Set the following to connect:
URL
: Specify the URL of the GraphQL service;Location
: Set this to the file path containing the custom schemas defined earlier.
The driver supports the following types of authentication:
- Basic: Set
AuthScheme
to Basic. You must specify theUser
andPassword
of the GraphQL service. - OAuth 1.0 & 2.0: Please see Using OAuth Authentication for detailed instructions.
- AwsCognitoSrp
- AwsCognitoBasic
Authenticate with AWS Cognito Credentials¶
If you want to use the connector with a user registered in a User Pool in AWS Cognito, set the following properties to authenticate:
AuthScheme
: Set this to AwsCognitoSrp (recommended). You can also use AwsCognitoBasic.AWSCognitoRegion
: Set this to the region of the User Pool.AWSUserPoolId
: Set this to the User Pool Id.AWSUserPoolClientAppId
: Set this to the User Pool Client App Id.AWSUserPoolClientAppSecret
: Set this to the User Pool Client Secret.AWSIdentityPoolId
: Set this to the Identity Pool ID of the Identity Pool that is linked with the User Pool.User
: Set this to the username of the user registered in the User Pool.Password
: Set this to the password of the user registered in the User Pool.
Use OAuth Authentication¶
This section shows how to use the connector to authenticate to any data source that supports OAuth.
OAuth requires the authenticating user to interact with GraphQL using the browser. The connector facilitates this in various ways as described in the following sections.
Before following the procedures below, you need to register an OAuth app with the service to obtain the OAuthClientId
and OAuthClientSecret
. You should also set the AuthScheme
to OAuth.
Custom Credentials¶
Custom Credentials describes desktop authentication using the credentials for your custom OAuth app.
Headless Machines¶
In the Headless Machines OAuth flow, users need to authenticate via a browser on another machine. You need to create a custom OAuth app.
Custom Credentials¶
Authenticate to GraphQL¶
After setting the following connection properties, you are ready to connect:
OAuthVersion
: Set this to the OAuth Version, either 1.0 or 2.0.OAuthRequestTokenURL
: Required for OAuth 1.0. In OAuth 1.0 this is the URL where the app makes a request for the request token.OAuthAuthorizationURL
: Required for OAuth 1.0 and 2.0. This is the URL where the user logs into the service and grants permissions to the application. In OAuth 1.0 if permissions are granted the request token is authorized.OAuthAccessTokenURL
: Required for OAuth 1.0 and 2.0. This is the URL where the request for the access token is made. In OAuth 1.0 the authorized request token is exchanged for the access token.OAuthRefreshTokenURL
: Required for OAuth 2.0. In OAuth 2.0 this is the URL where the refresh token is exchanged for a new access token when the old one expires. Note that for your data source this may be the same as the access token URL.OAuthClientId
: Set this to the client ID in your app settings. This is also called the consumer key.OAuthClientSecret
: Set this to the client secret in your app settings. This is also called the consumer secret.CallbackURL
: Set this tohttp://localhost:33333
. If you specified a redirect URL in your app settings, this must match.InitiateOAuth
: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the access token in the connection string.
When you connect, the connector opens the OAuth endpoint in your default browser. Log in and grant permissions to the application. The connector then completes the OAuth process:
- Extracts the access token from the callback URL and authenticates requests.
- Refreshes the access token when it expires.
- Saves OAuth values in
OAuthSettingsLocation
to be persisted across connections.
Headless Machines¶
Use OAuth on a Headless Machine¶
To create GraphQL data sources on headless servers or other machines on which the connector cannot open a browser, you need to authenticate from another machine. Authentication is a two-step process.
- Instead of installing the connector on another machine, you can follow the steps below to obtain the
OAuthVerifier
value. Or, you can install the connector on another machine and transfer the OAuth authentication values, after you authenticate through the usual browser-based flow. - You can then configure the connector to automatically refresh the access token from the headless machine.
You can follow the headless OAuth authentication flow using the OAuth credentials for your custom OAuth app.
Use the Credentials for a Custom OAuth App¶
Obtain a Verifier Code
Set the following properties on the headless machine:
InitiateOAuth
: Set this to OFF.OAuthClientId
: Set this to the App ID in your app settings.OAuthClientSecret
: Set this to the App Secret in your app settings.
You can then follow the steps below to authenticate from another machine and obtain the OAuthVerifier
connection property.
- Call the GetOAuthAuthorizationURL stored procedure with the CallbackURL input parameter set to the exact Redirect URI you specified in your app settings.
- Save the value of the returned AuthToken and AuthKey if
OAuthVersion
is set to 1.0. They will be used in the next step. - Open the returned URL in a browser. Log in and grant permissions to the connector. You are then redirected to the callback URL, which contains the verifier code.
- Save the value of the verifier code. You will set this in the
OAuthVerifier
connection property.
On the headless machine, set the following connection properties to obtain the OAuth authentication values:
OAuthVersion
: Set this to the OAuth Version, either 1.0 or 2.0.OAuthRequestTokenURL
: Required for OAuth 1.0. In OAuth 1.0 this is the URL where the app makes a request for the request token.OAuthAuthorizationURL
: Required for OAuth 1.0 and 2.0. This is the URL where the user logs into the service and grants permissions to the application. In OAuth 1.0 if permissions are granted the request token is authorized.OAuthAccessTokenURL
: Required for OAuth 1.0 and 2.0. This is the URL where the request for the access token is made. In OAuth 1.0 the authorized request token is exchanged for the access token.OAuthRefreshTokenURL
: Required for OAuth 2.0. In OAuth 2.0 this is the URL where the refresh token is exchanged for a new access token when the old one expires. Note that for your data source this may be the same as the access token URL.OAuthClientId
: Set this to the client ID in your app settings. This is also called the consumer key.OAuthClientSecret
: Set this to the client secret in your app settings. This is also called the consumer secret.CallbackURL
: Set this tohttp://localhost:33333
. If you specified a redirect URL in your app settings, this must match.InitiateOAuth
: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the access token in the connection string.
Connect to Data
After the OAuth settings file is generated, set the following properties to connect to data:
OAuthSettingsLocation
: Set this to the file containing the encrypted OAuth authentication values. Make sure this file gives read and write permissions to the provider to enable the automatic refreshing of the access token.InitiateOAuth
: Set this to REFRESH.
Transfer OAuth Settings
Follow the steps below to install the connector on another machine, authenticate, and then transfer the resulting OAuth values.
On a second machine, install the connector and connect with the following properties set:
OAuthSettingsLocation
: Set this to a writable text file.InitiateOAuth
: Set this to GETANDREFRESH.OAuthClientId
: Set this to the Client ID in your app settings.OAuthClientSecret
: Set this to the Client Secret in your app settings.CallbackURL
: Set this to the Callback URL in your app settings.
Test the connection to authenticate. The resulting authentication values are written, encrypted, to the path specified by OAuthSettingsLocation
. Once you have successfully tested the connection, copy the OAuth settings file to your headless machine. On the headless machine, set the following connection properties to connect to data:
InitiateOAuth
: Set this to REFRESH.OAuthSettingsLocation
: Set this to the path to your OAuth settings file. Make sure this file gives read and write permissions to the connector to enable the automatic refreshing of the access token.
Model GraphQL Data¶
This section shows how to control the various schemas that the connector offers to bridge the gap between relational SQL and GraphQL services.
Schema Introspection
GraphQL services offer a introspection query service which the connector can use to obtain view and column names.
All SCALAR mutation fields are exposed directly, and all object fields are expanded.
Mutations
The connector will automatically scan for available Using Mutations. Given that there is no method provided by GraphQL for determining which mutations can be used for each table, each mutation is exposed as a stored procedure.
LIST fields are exposed as temporary tables (GraphQL tables of type TEMPORARY_TABLE). The discovered temporary tables can be obtained by querying the sys_tables and sys_tablecolumns system tables.
Customize Schemas
Operations details the process for configuring custom schema files. Setting up these custom schema files is a required step in establishing a connection to GraphQL data.
System Tables
See System Tables to query the current table metadata.
Stored Procedures
The connector makes use of Stored Procedures to perform various functions, such as obtaining and refreshing OAuth tokens.
Automatic Schema Discovery¶
By default, the connector will automatically read metadata from GraphQL.
Schema Introspection¶
GraphQL services offer a introspection query service which the connector can use to obtain view and column names.
A GraphQL introspection query service has a query object at its root. Other objects are nested into the root query object, which can in turn have their own nested objects.
The connector reads LIST or Relay Connection type objects as views. If a field is SCALAR, it's read as a column, and if a field is a simple OBJECT, it is expanded.
Set the metadata introspection depth as follows:
ExpandTablesDepth
: Setting to 0 will read only from the root query object. In scenarios where lists are nested in other lists, set theExpandTablesDepth
to the number of nested layers deep to be scanned.ExpandColumnsDepth
: This determines how many more layers deep (starting from theExpandTablesDepth
) to expand objects to include fields from their nested child objects.
Use Mutations¶
The connector will automatically scan for available mutations. Given that there is no method provided by GraphQL for determining which mutations can be used for each table, each mutation is exposed as a stored procedure.
All SCALAR mutation fields are exposed directly, and all object fields are expanded.
LIST fields are exposed as temporary tables (GraphQL tables of type TEMPORARY_TABLE). The discovered temporary tables can be obtained by querying the sys_tables and sys_tablecolumns system tables. These tables contain a RowId and ParentId field to denote the row and housing (parent) table of a given child table.
An example of a mutation is productCreate
. Invoke mutations as a stored procedure after first loading the relevant child tables needed for the operation:
INSERT INTO productCreate_metafields(namespace,key,value,type) VALUES('MRproductInfo','ALU','449788022','string')
INSERT INTO productCreate_variants(RowId,price,sku,inventoryManagement,weightUnit,weight,options,metafields,inventoryQuantities) VALUES(1,'39.99','38536314-0acb-4d3f-b8ff-a0f2014d2c75','SHOPIFY','POUNDS',1,'L,XL,XXL','productCreate_variants_metafields','productCreate_variants_inventoryQuantities')
INSERT INTO productCreate_variants_metafields(ParentId,namespace,key,value,type) VALUES('1','MRproductInfo','ALU','449788022-M-','string')
INSERT INTO productCreate_variants_metafields(ParentId,namespace,key,value,type) VALUES('1','MRproductInfo','ItemNumber','400000881201','string')
INSERT INTO productCreate_variants_inventoryQuantities(ParentId,locationId,availableQuantity) VALUES('1','gid://shopify/Location/1448280087',5)
INSERT INTO productCreate_media(originalSource,alt,mediaContentType) VALUES('https://static.nike.com/a/images/t_PDP_1280_v1/f_auto,q_auto:eco/qwqfyddzikcgc4ozwigp/revolution-5-road-running-shoes-szF7CS.png','Magic Shoes','IMAGE')
EXECUTE productCreate title='NIKE - 449788022', descriptionHtml=' - MEN\'S SHOES 42-MENS L/S TEES',productType='Staging', vendor='NIKE', published='false', options='size,width',metafields='productCreate_metafields', variants='productCreate_variants', media='productCreate_media'
Customize Schemas¶
Custom schemas are defined in configuration files. This chapter outlines the structure of these files.
Note: The GenerateSchemaFiles property enables you to persist table metadata in static schema files that are easy to customize (to persist your changes to column data types, for example). Set this property to "OnStart" to generate schema files for all tables in your database at connection. Alternatively, set this property to "OnUse" to generate schemas as you execute SELECT queries to tables. It is also possible to create a specific schema file for a table using the CreateSchema stored procedure.
Edit Schema Files¶
Tables and views are defined by authoring schema files in APIScript. APIScript is a simple configuration language that allows you to define the columns and the behavior of the table. It also has built-in Operations that enable you to process GraphQL. In addition to these data processing primitives, APIScript is a full-featured language with constructs for conditionals, looping, etc. However, as shown by the example schema, for most table definitions you will not need to use these features.
Example Schema¶
Below is a fully functional table schema that models the Labels table and contains all the components you will need to execute SQL to GraphQL data sources.
You can find more information on each of the components of a schema in Column Definitions, SELECT Execution.
<rsb:script xmlns:rsb="http://apiscript.com/ns?v1" xmlns:xs="http://www.cdata.com/ns/rsbscript/2" xmlns:other="http://apiscript.com/ns?v1">
<rsb:info title="Labels" desc="Lists information about the different labels you can apply on an issue." other:possiblePaths="{'path':'/repository/labels/edges/node','Name':{'path':'/repository/label'}}" other:paginationObjects="{'labels':{'cursorName':'after','pageSizeArgumentName':'first','paginationType':'Cursor','isConnection':'True','pageInfo':['endCursor','hasNextPage','hasPreviousPage','startCursor']}}">
<attr name="Id" xs:type="string" key="true" other:relativePath="id" desc="The ID of the label." />
<attr name="RepositoryName" xs:type="string" other:relativePath="name" desc="The name of the repository." other:filter="name:=" other:argumenttype="String!" other:depth="1" references="Repositories.Name" />
<attr name="UserLogin" xs:type="string" desc="The login name of the user." other:filter="owner:=" other:argumenttype="String!" other:depth="1" references="Users.Login" other:mirror="true" other:canBeSliced="true" />
<attr name="Color" xs:type="string" other:relativePath="color" desc="Identifies the label color." />
<attr name="CreatedAt" xs:type="datetime" other:relativePath="createdAt" desc="Identifies the date and time when the label was created." other:orderby="CREATED_AT" />
<attr name="Description" xs:type="string" other:relativePath="description" desc="A brief description of this label." />
<attr name="IsDefault" xs:type="boolean" other:relativePath="isDefault" desc="Indicates whether or not this is a default label." />
<attr name="Name" xs:type="string" other:relativePath="name" desc="Identifies the label name." other:filter="name:=" other:argumenttype="String!" other:orderby="NAME" other:isPathFilter="true" />
<attr name="ResourcePath" xs:type="string" other:relativePath="resourcePath" desc="The HTTP path for this label." />
<attr name="UpdatedAt" xs:type="datetime" other:relativePath="updatedAt" desc="Identifies the date and time when the label was last updated." />
<attr name="Url" xs:type="string" other:relativePath="url" desc="The HTTP URL for this label." />
</rsb:info>
<rsb:script method="GET">
<rsb:push op="graphqladoSelect" />
</rsb:script>
</rsb:script>
Column Definitions¶
The basic attributes of a column are the name of the column, the data type, whether the column is a primary key, the relative path and the depth. The connector uses the depth attribute to extract nodes from hierarchical data.
Mark up column attributes in the block of the schema file. You can also provide a description of each attribute using the desc property.
<rsb:script xmlns:rsb="http://apiscript.com/ns?v1" xmlns:xs="http://www.cdata.com/ns/rsbscript/2" xmlns:other="http://apiscript.com/ns?v1">
<rsb:info title="Labels" desc="Lists information about the different labels you can apply on an issue." other:possiblePaths="{'path':'/repository/labels/edges/node','Name':{'path':'/repository/label'}}" other:paginationObjects="{'labels':{'cursorName':'after','pageSizeArgumentName':'first','paginationType':'Cursor','isConnection':'True','pageInfo':['endCursor','hasNextPage','hasPreviousPage','startCursor']}}">
<attr name="Id" xs:type="string" key="true" other:relativePath="id" desc="The ID of the label." />
<attr name="RepositoryName" xs:type="string" other:relativePath="name" desc="The name of the repository." other:filter="name:=" other:argumenttype="String!" other:depth="1" references="Repositories.Name" />
<attr name="UserLogin" xs:type="string" desc="The login name of the user." other:filter="owner:=" other:argumenttype="String!" other:depth="1" references="Users.Login" other:mirror="true" other:canBeSliced="true" />
<attr name="Color" xs:type="string" other:relativePath="color" desc="Identifies the label color." />
<attr name="CreatedAt" xs:type="datetime" other:relativePath="createdAt" desc="Identifies the date and time when the label was created." other:orderby="CREATED_AT" />
<attr name="Description" xs:type="string" other:relativePath="description" desc="A brief description of this label." />
<attr name="IsDefault" xs:type="boolean" other:relativePath="isDefault" desc="Indicates whether or not this is a default label." />
<attr name="Name" xs:type="string" other:relativePath="name" desc="Identifies the label name." other:filter="name:=" other:argumenttype="String!" other:orderby="NAME" other:isPathFilter="true" />
<attr name="ResourcePath" xs:type="string" other:relativePath="resourcePath" desc="The HTTP path for this label." />
<attr name="UpdatedAt" xs:type="datetime" other:relativePath="updatedAt" desc="Identifies the date and time when the label was last updated." />
<attr name="Url" xs:type="string" other:relativePath="url" desc="The HTTP URL for this label." />
</rsb:info>
<rsb:script method="GET">
<rsb:push op="graphqladoSelect" />
</rsb:script>
</rsb:script>
The following sections provide more detail on using paths to extract columns and rows. To see the column definitions in a complete schema, refer to Customizing Schemas.
Map SELECT Projection to GraphQL Fields¶
Control the building process of a GraphQL field path with the properties listed below:
-
The
other:possiblePaths
property is used to specify the base paths that select the column's value.Base paths start with a '/' and contain the full path to the last GraphQL nested object.
<rsb:info title="Labels" desc="Lists information about the different labels you can apply to an issue." other:possiblePaths="{'path':'/repository/labels/edges/node','Name':{'path':'/repository/label'}}" other:paginationObjects="{'labels':{'cursorName':'after','pageSizeArgumentName':'first','paginationType':'Cursor','isConnection':'True','pageInfo':['endCursor','hasNextPage','hasPreviousPage','startCursor']}}">
The following GraphQL query is based on the above script example:
{ # base path=/repository/labels/edges/node repository { labels { edges { node { ... } } } } }
-
The
other:relativePath
property must be specified for each column. This property is used in conjuction with the other:possiblePaths property to build the GraphQL field path.<attr name="Name" xs:type="string" other:relativePath="name" desc="Identifies the label name." />
Based on the above script example the connector will build the following GraphQL query:
{ # base path=/repository/labels/edges/node repository { # depth=1 labels { # depth=2 edges { node { name # path=base path + relative path. } } } } }
-
Use the
other:depth
property to specify an element inside a specific GraphQL object. The indexes are 1-based. If this attribute is not specified then the default value will be equal to the last nested GraphQL object.<attr name="RepositoryName" xs:type="string" other:relativePath="name" desc="The name of the repository." other:depth="1" />
The following GraphQL query is built from the above script example:
{ # base path=/repository/labels/edges/node repository { # depth=1 name # This is mapped to the RepositoryName column labels { # depth=2 edges { node { ... } } } } }
-
Use the
other:fragment
property to specify a group of fields. This property can be used when the GraphQL server returns an array of objects and the connector may need to push this info as an aggregate.<attr name="ColumnValues" xs:type="string" other:relativePath="column_values" desc="Column values." other:fragment="fragment ItemColumnValues on ColumnValue { ID \r\n value }" />
Based on the above script example, the connector will build the following GraphQL query:
query { items { column_values { ...ItemColumnValues } } } fragment ItemColumnValues on ColumnValue { id value }
-
Use the
other:canbesliced
property enable slicing behavior in the connectorFor example,
SELECT * FROM Table WHERE Col IN ('1','2','3')
becomes
SELECT * FROM Table WHERE Col=1 SELECT * FROM Table WHERE Col=2 SELECT * FROM Table WHERE Col=3
-
Use the
other:mirror
property to reflect the value specified in the criteria. Use on columns that are not specified in the server response.For example:
SELECT * FROM Table WHERE Col=X (If other:mirror=true the connector will artificially set the value of Col to X for every row.)
-
Use
references
to reference the key column of the parent table. Example: If there are two tables Orders and OrderLineItems and the OrderLineItems has a column OrderId, the references field for this column will be "Orders.Id".
*Notes
*:
- Paths and column names (when used to generate the path) are case sensitive.
- At least one possible path should be specified.
- The
other:relativePath
property must be specified for every column. Otherwise, the connector cannot map the SELECT column to a GraphQL field.
SELECT Execution¶
When a SELECT query is issued, the connector executes the GET method of the schema, which invokes the connector's built-in operations to process GraphQL. In the GET method you have control over the request for data. The following procedures show several ways to use this: search the remote data, server-side, with SELECT WHERE, or implement paging.
Collaborative Query Processing¶
By default, the connector will process the query client-side, in memory, so the URL
connection property is all you need to set to execute any SELECT statement.
The connector can also offload supported queries to the server while processing the rest of the query client side. For example, a server-side search filters the data so that a smaller dataset can be processed client-side. See the documentation for the SupportEnhancedSQL
property for more information on the collaborative query processing feature. You can extend the resulting script to add support for processing requests server side.
Map SELECT criteria to GraphQL arguments¶
The following sections show how to translate a SELECT WHERE statement into a GraphQL query to GraphQL APIs. The procedure uses the following statement:
SELECT *
FROM <table>
WHERE ModifiedAt<'2019-10-30 05:05:36.001'
If this filter is supported on the server via query parameters, you can use the other:filter property of the api:info column definition to specify the desired mapping. For the above query, the connector will use this property to map the modifiedAt < '<date>' filter to the query parameter that returns results that were modifed before a given date, and the modifedAt > '<date>' filter to the query parameter that filters results that were modifed after.
other:filter
is a semicolon separated list of <parameter name>:<operator list>. <parameter name> is the name of the query parameter and <operator list> is a comma-separated list of operators used for the mapping. Valid operators are <, <=, =, > and >=.other:argumentType
is a required extra info. It should contain the type of the argument based on the GraphQL schema type language.
To perform this mapping, the connector would use the following markup for the modifedAt column definition:
<attr name="ModifiedAt" xs:type="datetime" other:relativePath="modifiedAt" other:argumentType="DateTime" description="When the vendor was last modified." other:filter="modifiedAtAfter:>;modifiedAtBefore:<" />
This query results in the following postdata:
{
"variables": {
"ModifiedAt_modifiedAtBefore": "2019-10-30T09:05:36.001Z"
},
"query": "query($ModifiedAt_modifiedAtBefore:DateTime) {\r\nbusinesses {\r\nedges {\r\nnode {\r\ncustomers(modifiedAtBefore:$ModifiedAt_modifiedAtBefore) {\r\nedges {\r\nnode {\r\nid\r\nmodifiedAt\r\n}\r\n}\r\npageInfo {\r\ntotalPages\r\ncurrentPage\r\n}\r\n}\r\nid\r\n}\r\n}\r\npageInfo {\r\ntotalPages\r\ncurrentPage\r\n}\r\n}\r\n}\r\n"
}
Path filters¶
There exist GraphQL services where the GraphQL argument is not enough to process the filter servereport suite ID (RSID)e. The path should be changed. In order to correctly use a path filter you need to complete the following steps:
-
Add the path to the
other:possiblePaths
extra info and map it with the column name you want to filter.Ex: other:possiblepaths="{'path':'/businesses/edges/node','id':{'path':'/business'}}"
-
Set the
other:isPathFilter
to TRUE in the column defintion.<attr name="Id" xs:type="string" key="true" other:relativePath="id" other:isPathFilter="true" other:filter="id:=" />
After completing these steps the following SQL query
SELECT Id,Name,CreatedAt FROM Businesses WHERE Id='QnVzaW5M6ZTY4ZDA2MmQtYzkzZS00MGZkLTk4YWUtNDg2YzcxMmExNzFl'
will be converted to the postdata:
{
"variables": {
"Id_id": "QnVzaW5M6ZTY4ZDA2MmQtYzkzZS00MGZkLTk4YWUtNDg2YzcxMmExNzFl"
},
"query": "query($Id_id:ID) {\r\nbusiness(id:$Id_id) {\r\nid\r\nname\r\ncreatedAt\r\n}\r\n}\r\n"
}
Pagination¶
The driver supports two pagination modes.
-
Cursor
other:paginationObjects = "{ 'labels': { 'cursorName': 'after', 'pageSizeArgumentName': 'first', 'paginationType': 'Cursor', 'isConnection': 'True', 'pageInfo': ['endCursor', 'hasNextPage', 'hasPreviousPage', 'startCursor'] } }"
The following postdata will be generated after processing the
other:paginationObjects
table extra info specified above:{ "variables": { "UserLogin_owner": "testaccount71", "RepositoryName_name": "test", "first": <Pagesize> }, "query": "query($UserLogin_owner:String!, $RepositoryName_name:String!, $first:Int) {\r\nrepository(owner:$UserLogin_owner, name:$RepositoryName_name) {\r\nlabels(first:$first) {\r\nedges {\r\nnode {\r\nid\r\ncolor\r\ncreatedAt\r\ndescription\r\nisDefault\r\nname\r\nresourcePath\r\nupdatedAt\r\nurl\r\n}\r\n}\r\npageInfo {\r\nendCursor\r\nhasNextPage\r\n}\r\n}\r\nname\r\n}\r\n}\r\n" }
-
Offset
other:pageInfoObjects="{ 'businesses': { 'offsetArgumentName': 'page', 'pageSizeArgumentName': 'pageSize', 'paginationType': 'Offset', 'isConnectionObject': 'True', 'pageInfo': ['currentPage', 'totalPages', 'totalCount'] } }"
The following postdata will be generated after processing the
other:paginationObjects
table extra info specified above:{ "variables": { "pageSize_1": <Pagesize> }, "query": "query($pageSize_1:Int) {\r\nbusinesses(pageSize:$pageSize_1) {\r\nedges {\r\nnode {\r\nid\r\n}\r\n}\r\npageInfo {\r\ntotalPages\r\ncurrentPage\r\n}\r\n}\r\n}\r\n" }
Process Other SELECT Statements Server Side¶
ORDER BY¶
You can sort the results servereport suite ID (RSID)e if the GraphQL service supports it by specifying the following properties:
-
The
other:orderByFormat
can be specified in the table definition or in the column definition.<rsb:info title="Labels" desc="Lists information about the different labels you can apply on an issue." other:orderByFormat="{field: {orderByArgumentValue}, direction: {sortOrder}}"> <attr name="CreatedAt" xs:type="datetime" other:relativePath="createdAt" other:orderByFormat="{field: {orderByArgumentValue}, direction: {sortOrder}}" other:orderBy="orderBy:CREATED_AT" />
-
The
other:orderBy
should be specified only in the column definition. The format of this property is <orderByArgumentName>:<orderByArgumentValue><attr name="CreatedAt" xs:type="datetime" other:relativePath="createdAt" other:orderBy="orderBy:CREATED_AT" />
After completing these steps the following SQL query
SELECT ID FROM Labels ORDER BY CreatedAt ASC
will be converted to the postdata:
{
"variables": {
"first": <Pagesize>
},
"query": "query($first:Int) {\r\nrepository {\r\nlabels(sort:{field: CREATED_AT, direction: ASC}, first:$first) {\r\nedges {\r\nnode {\r\nid\r\n}\r\n}\r\npageInfo {\r\nendCursor\r\nhasNextPage\r\n}\r\n}\r\n}\r\n}\r\n"
}
Operations¶
The connector has high-performance operations for processing GraphQL data sources. These operations are platform neutral: Schema files that invoke these operations can be used in both .NET and Java. You can also extend the connector with your own operations written in .NET or Java.
The connector has the following operations:
Operation Name | Description |
---|---|
OAuthGetAccessToken | For OAuth 1.0, exchange a request token for an access token. For OAuth 2.0, get an access token or get a new access token with the refresh token. |
OAuthGetUserAuthorizationURL | Generates the user authorization URL. OAuth 2.0 will not access the network in this operation. |
OAuthGetAccessToken¶
The OAuthGetAccessToken operation is an APIScript operation that is used to facilitate the OAuth authentication and refresh flows.
The connector includes stored procedures that invoke this operation to complete the OAuth exchange. The following example schema briefly lists some of the typically required inputs before the following sections explain them in more detail.
For a guide to using the connector to authenticate, see the Using OAuth Authentication chapter.
Create a GetOAuthAccessToken Stored Procedure¶
Invoke the OAuthGetAccessToken with the GetOAuthAccessToken stored procedure. The following inputs are required for most data sources and will provide default values for the connection properties of the same name.
<api:script xmlns:api="http://www.rssbus.com/ns/rsbscript/2">
<api:info title="GetOAuthAccessToken" description="Obtains the OAuth access token to be used for authentication with various APIs." >
<input name="AuthMode" desc="The OAuth flow. APP or WEB." />
<input name="CallbackURL" desc="The URL to be used as a trusted redirect URL, where the user will return with the token that verifies that they have granted your app access. " />
<input name="OAuthAccessToken" desc="The request token. OAuth 1.0 only." />
<input name="OAuthAccessTokenSecret" desc="The request token secret. OAuth 1.0 only." />
<input name="Verifier" desc="The verifier code obtained when the user grants permissions to your app." />
<output name="OAuthAccessToken" desc="The access token." />
<output name="OAuthTokenSecret" desc="The access token secret." />
<output name="OAuthRefreshToken" desc="A token that may be used to obtain a new access token." />
</api:info>
<!-- Set OAuthVersion to 1.0 or 2.0. -->
<api:set attr="OAuthVersion" value="MyOAuthVersion" />
<!-- Set RequestTokenURL to the URL where the request for the request token is made. OAuth 1.0 only.-->
<api:set attr="OAuthRequestTokenURL" value="http://MyOAuthRequestTokenURL" />
<!-- Set OAuthAuthorizationURL to the URL where the user logs into the service and grants permissions to the application. -->
<api:set attr="OAuthAuthorizationURL" value="http://MyOAuthAuthorizationURL" />
<!-- Set OAuthAccessTokenURL to the URL where the request for the access token is made. -->
<api:set attr="OAuthAccessTokenURL" value="http://MyOAuthAccessTokenURL" />
<!-- Set GrantType to the authorization grant type. OAuth 2.0 only. -->
<api:set attr="GrantType" value="CODE" />
<!-- Set SignMethod to the signature method used to calculate the signature of the request. OAuth 1.0 only.-->
<api:set attr="SignMethod" value="HMAC-SHA1" />
<api:call op="oauthGetAccessToken">
<api:push/>
</api:call>
</api:script>
Write the RefreshOAuthAccessToken Stored Procedure¶
You can also use OAuthGetAccessToken to refresh the access token by providing the following inputs:
<api:script xmlns:api="http://www.rssbus.com/ns/rsbscript/2">
<api:info title="RefreshOAuthAccessToken" description="Refreshes the OAuth access token used for authentication." >
<input name="OAuthRefreshToken" desc="A token that may be used to obtain a new access token." />
<output name="OAuthAccessToken" desc="The authentication token returned." />
<output name="OAuthTokenSecret" desc="The authentication token secret returned. OAuth 1.0 only." />
<output name="OAuthRefreshToken" desc="A token that may be used to obtain a new access token." />
<output name="ExpiresIn" desc="The remaining lifetime on the access token." />
</api:info>
<!-- Set OAuthVersion to 1.0 or 2.0. -->
<api:set attr="OAuthVersion" value="MyOAuthVersion" />
<!-- Set GrantType to REFRESH. OAuth 2.0 only. -->
<api:set attr="GrantType" value="REFRESH" />
<!-- Set SignMethod to the signature method used to calculate the signature of the request. OAuth 1.0 only.-->
<api:set attr="SignMethod" value="HMAC-SHA1" />
<!-- Set OAuthAccessTokenURL to the URL where the request for the access token is made. -->
<api:set attr="OAuthAccessTokenURL" value="http://MyOAuthAccessTokenURL" />
<!-- Set AuthMode to 'WEB' when calling RefreshOAuthAccessToken -->
<api:set attr="AuthMode" value="WEB"/>
<api:call op="oauthGetAccessToken">
<api:push/>
</api:call>
</api:script>
Input Parameters¶
-
OAuthVersion
: The OAuth version.The allowed values are 1.0, 2.0. The default value is 1.0.
-
AuthMode
: The OAuth flow. OAuth 2.0 only. If you choose the App mode, this operation will launch your browser and prompt you to authenticate with your account credentials. Set this parameter to WEB to authenticate a Web app or if the connector is not allowed to open a Web browser. The default value is APP. -
OAuthRequestTokenURL
: The URL where the connector makes a request for the request token. OAuth 1.0 only. Required for OAuth 1.0. -
OAuthAuthorizationURL
: The URL where the user logs into the service and grants permissions to the application. In OAuth 1.0, if permissions are granted the request token is authorized. -
OAuthAccessTokenURL
: The URL where the request for the access token is made. In OAuth 1.0, the authorized request token is exchanged for the access token. -
CallbackURL
: The URL to be used as a trusted redirect URL, where the user will return with the token that verifies that they have granted your app access. This value must match the callback URL you specify when you register an app. Note that your data source may additionally require the port. -
OAuthClientId
: The client ID obtained when you register an app. Also called a consumer key. -
OAuthClientSecret
: The client secret obtained when you register an app. Also called a consumer secret. -
OAuthAccessToken
: The request token. OAuth 1.0 only. -
OAuthAccessTokenSecret
: The request token secret. OAuth 1.0 only. -
OAuthRefreshToken
: A token that may be used to obtain a new access token. -
GrantType
: Authorization grant type. OAuth 2.0 only. The allowed values are CODE, PASSWORD, CLIENT, REFRESH. The default value is CODE. -
Verifier
: The verifier code obtained when the user grants permissions to the connector. In the OAuth 2.0 code grant type, the verifier code is located in the code query string parameter of the callback URL. In OAuth 1.0, the verifier is located in the oauth_verifier query string parameter of the callback URL. -
SignMethod
: The signature method used to calculate the signature for OAuth 1.0. The allowed values are HMAC-SHA1, PLAINTEXT. The default value is HMAC-SHA1. -
Cert
: Path for the PFX personal certificate file. OAuth 1.0 only. -
CertPassword
: Personal certificate password. OAuth 1.0 only. -
OtherOptions
: Other options to control the behavior of OAuth. -
OAuthParam:\
*: Other parameters. -
PostData
: The HTTP POST data. -
Timeout
: The timeout, in seconds, for the operation to complete. Zero (0) means no timeout. The default value is 60. -
LogFile
: Specifies a file where the request and response are logged. -
Proxy_Auto
: Whether or not the proxy should be detected from Windows system settings. This takes precedence over other proxy settings and is not available in Java. The allowed values are TRUE, FALSE. The default value is FALSE. -
Proxy_Server
: IP address or host name of the proxy server used for the request. -
Proxy_Port
: The port number of the proxy server. -
Proxy_User
: The user ID used to authenticate with the proxy server. -
Proxy_Password
: The password used to authenticate with the proxy server. -
Proxy_AuthScheme
: The authentication scheme of the proxy server. The allowed values are BASIC, DIGEST, PROPRIETARY, NONE, NTLM. The default value is BASIC. -
Proxy_AuthToken
: The proxy authentication token. -
Proxy_SSLType
: The SSL type of the proxy server. The allowed values are AUTO, ALWAYS, NEVER, TUNNEL. The default value is AUTO. -
Firewall_Type
: The type of the firewall. The allowed values are NONE, TUNNEL, SOCKS4, SOCKS5. The default value is NONE. -
Firewall_Server
: The IP address or host name of the firewall. -
Firewall_Port
: The port number of the firewall. -
Firewall_User
: The user ID used to authenticate with the firewall. -
Firewall_Password
: The password used to authenticate with the firewall.
Output Parameters¶
OAuthAccessToken
: The access token.OAuthTokenSecret
: The access token secret.OAuthRefreshToken
: A token that may be used to obtain a new access token.ExpiresIn
: The remaining lifetime on the access token.OAuthParam:\
*: Other parameters sent from the server.
OAuthGetUserAuthorizationURL¶
The OAuthGetUserAuthorizationURL is an APIScript operation that is used to facilitate the OAuth authentication flow for Web apps, for offline apps, and in situations where the connector is not allowed to open a Web browser. To pass the needed inputs to this operation, define the GetOAuthAuthorizationURL stored procedure. The connector can call this internally.
Define stored procedures in .rsb files with the same file name as the schema's title. The example schema briefly lists some of the typically required inputs before the following sections explain them in more detail.
For a guide to authenticating in the OAuth flow, see the Using OAuth Authentication chapter.
Write the GetOAuthAuthorizationURL Stored Procedure¶
Call OAuthGetUserAuthorizationURL in the GetOAuthAuthorizationURL stored procedure.
<api:script xmlns:api="http://www.rssbus.com/ns/rsbscript/2">
<api:info title="Get OAuth Authorization URL" description="Obtains the OAuth authorization URL used for authentication with various APIs." >
<input name="CallbackURL" desc="The URL to be used as a trusted redirect URL, where the user will return with the token that verifies that they have granted your app access. " />
<output name="URL" desc="The URL where the user logs in and is prompted to grant permissions to the app. " />
<output name="OAuthAccessToken" desc="The request token. OAuth 1.0 only." />
<output name="OAuthTokenSecret" desc="The request token secret. OAuth 1.0 only." />
</api:info>
<!-- Set OAuthVersion to 1.0 or 2.0. -->
<api:set attr="OAuthVersion" value="MyOAuthVersion" />
<!-- Set ResponseType to the desired authorization grant type. OAuth 2.0 only.-->
<api:set attr="ResponseType" value="code" />
<!-- Set SignMethod to the signature method used to calculate the signature. OAuth 1.0 only.-->
<api:set attr="SignMethod" value="HMAC-SHA1" />
<!-- Set OAuthAuthorizationURL to the URL where the user logs into the service and grants permissions to the application. -->
<api:set attr="OAuthAuthorizationURL" value="http://MyOAuthAuthorizationURL" />
<!-- Set OAuthAccessTokenURL to the URL where the request for the access token is made. -->
<api:set attr="OAuthAccessTokenURL" value="http://MyOAuthAccessTokenURL"/>
<!-- Set RequestTokenURL to the URL where the request for the request token is made. OAuth 1.0 only.-->
<api:set attr="OAuthRequestTokenURL" value="http://MyOAuthRequestTokenURL" />
<api:call op="oauthGetUserAuthorizationUrl">
<api:push/>
</api:call>
</api:script>
<p>
Input Parameters¶
-
OAuthVersion
: The OAuth version.The allowed values are 1.0, 2.0. The default value is 1.0.
-
OAuthAuthorizationURL
: The URL where the user logs into the service and grants permissions to the application. In OAuth 1.0, if permissions are granted the request token is authorized. -
OAuthRequestTokenURL
: The URL where the connector makes a request for the request token. OAuth 1.0 only. Required for OAuth 1.0. -
CallbackURL
: The URL to be used as a trusted redirect URL, where the user will return with the token that verifies that they have granted your app access. This value must match the callback URL you specify when you register an app. Note that your data source may additionally require the port. The default value ishttp://127.0.0.1/
. -
OAuthClientId
: The client Id. Also called a consumer key. -
OAuthClientSecret
: The client secret. Also called a consumer secret. -
ResponseType
: The desired authorization grant type. OAuth 2.0 only. The allowed values are CODE, IMPLICIT. The default value is CODE. -
SignMethod
: The signature method used to calculate the signature for OAuth 1.0. The allowed values are HMAC-SHA1, RSA-SHA1, PLAINTEXT. The default value is HMAC-SHA1. -
Cert
: Path for the personal certificate PFX file. OAuth 1.0 only. -
CertPassword
: Personal certificate password. OAuth 1.0 only. -
OtherOptions
: Other options to control the behavior of OAuth. -
OAuthParam:\
*: Other parameters. OAuth 1.0 only. -
Timeout
: The timeout, in seconds, for the operation to complete. Zero (0) means no timeout. The default value is 60. -
Proxy_Auto
: Whether or not the proxy should be detected from Windows system settings. This takes precedence over other proxy settings and is not available in Java. The allowed values are TRUE, FALSE. The default value is FALSE. -
Proxy_Server
: IP address or host name of the proxy server used for the request. -
Proxy_Port
: The port number of the proxy server. -
Proxy_User
: The user ID used to authenticate with the proxy server. -
Proxy_Password
: The password used to authenticate with the proxy server. -
Proxy_AuthScheme
: The authentication scheme of the proxy server. The allowed values are BASIC, DIGEST, PROPRIETARY, NONE, NTLM. The default value is BASIC. -
Proxy_AuthToken
: The proxy authentication token. -
Proxy_SSLType
: The SSL type of the proxy server. The allowed values are AUTO, ALWAYS, NEVER, TUNNEL. The default value is AUTO. -
Firewall_Type
: The type of the firewall. The allowed values are NONE, TUNNEL, SOCKS4, SOCKS5. The default value is NONE. -
Firewall_Server
: The IP address or host name of the firewall. -
Firewall_Port
: The port number of the firewall. -
Firewall_User
: The user ID used to authenticate with the firewall. -
Firewall_Password
: The password used to authenticate with the firewall.
Output Parameters¶
URL
: The URL where the user logs in and is prompted to grant permissions to the app. In OAuth 1.0, if permissions are granted the request token is authorized.OAuthAccessToken
: The request token. OAuth 1.0 only.OAuthTokenSecret
: The request token secret. OAuth 1.0 only.OAuthParam:\
*: Other parameters sent from the server. OAuth 1.0 only.
System Tables¶
You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.
Schema Tables¶
The following tables return database metadata for GraphQL:
- sys_catalogs: Lists the available databases.
- sys_schemas: Lists the available schemas.
- sys_tables: Lists the available tables and views.
- sys_tablecolumns: Describes the columns of the available tables and views.
- sys_procedures: Describes the available stored procedures.
- sys_procedureparameters: Describes stored procedure parameters.
- sys_keycolumns: Describes the primary and foreign keys.
- sys_indexes: Describes the available indexes.
Data Source Tables¶
The following tables return information about how to connect to and query the data source:
- sys_connection_props: Returns information on the available connection properties.
- sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.
Query Information Tables¶
The following table returns query statistics for data modification queries:
- sys_identity: Returns information about batch operations or single updates.
sys_catalogs¶
Lists the available databases.
The following query retrieves all databases determined by the connection string:
SELECT * FROM sys_catalogs
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
sys_schemas¶
Lists the available schemas.
The following query retrieves all available schemas:
SELECT * FROM sys_schemas
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
SchemaName | String | The schema name. |
sys_tables¶
Lists the available tables.
The following query retrieves the available tables and views:
SELECT * FROM sys_tables
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view. |
TableType | String | The table type (table or view). |
Description | String | A description of the table or view. |
IsUpdateable | Boolean | Whether the table can be updated. |
sys_tablecolumns¶
Describes the columns of the available tables and views.
The following query returns the columns and data types for the Users table:
SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Users'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view containing the column. |
ColumnName | String | The column name. |
DataTypeName | String | The data type name. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The storage size of the column. |
DisplaySize | Int32 | The designated column's normal maximum width in characters. |
NumericPrecision | Int32 | The maximum number of digits in numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The column scale or number of digits to the right of the decimal point. |
IsNullable | Boolean | Whether the column can contain null. |
Description | String | A brief description of the column. |
Ordinal | Int32 | The sequence number of the column. |
IsAutoIncrement | String | Whether the column value is assigned in fixed increments. |
IsGeneratedColumn | String | Whether the column is generated. |
IsHidden | Boolean | Whether the column is hidden. |
IsArray | Boolean | Whether the column is an array. |
sys_procedures¶
Lists the available stored procedures.
The following query retrieves the available stored procedures:
SELECT * FROM sys_procedures
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the stored procedure. |
SchemaName | String | The schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure. |
Description | String | A description of the stored procedure. |
ProcedureType | String | The type of the procedure, such as PROCEDURE or FUNCTION. |
sys_procedureparameters¶
Describes stored procedure parameters.
The following query returns information about all of the input parameters for the SelectEntries stored procedure:
SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the stored procedure. |
SchemaName | String | The name of the schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure containing the parameter. |
ColumnName | String | The name of the stored procedure parameter. |
Direction | Int32 | An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters. |
DataTypeName | String | The name of the data type. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The number of characters allowed for character data. The number of digits allowed for numeric data. |
NumericPrecision | Int32 | The maximum precision for numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The number of digits to the right of the decimal point in numeric data. |
IsNullable | Boolean | Whether the parameter can contain null. |
IsRequired | Boolean | Whether the parameter is required for execution of the procedure. |
IsArray | Boolean | Whether the parameter is an array. |
Description | String | The description of the parameter. |
Ordinal | Int32 | The index of the parameter. |
sys_keycolumns¶
Describes the primary and foreign keys.
The following query retrieves the primary key for the Users table:
SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Users'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
IsKey | Boolean | Whether the column is a primary key in the table referenced in the TableName field. |
IsForeignKey | Boolean | Whether the column is a foreign key referenced in the TableName field. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
sys_foreignkeys¶
Describes the foreign keys.
The following query retrieves all foreign keys which refer to other tables:
SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
ForeignKeyType | String | Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key. |
sys_indexes¶
Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.
The following query retrieves all indexes that are not primary keys:
SELECT * FROM sys_indexes WHERE IsPrimary='false'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the index. |
SchemaName | String | The name of the schema containing the index. |
TableName | String | The name of the table containing the index. |
IndexName | String | The index name. |
ColumnName | String | The name of the column associated with the index. |
IsUnique | Boolean | True if the index is unique. False otherwise. |
IsPrimary | Boolean | True if the index is a primary key. False otherwise. |
Type | Int16 | An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3). |
SortOrder | String | The sort order: A for ascending or D for descending. |
OrdinalPosition | Int16 | The sequence number of the column in the index. |
sys_connection_props¶
Returns information on the available connection properties and those set in the connection string.
When querying this table, the config connection string should be used:
jdbc:cdata:graphql:config:
This connection string enables you to query this table without a valid connection.
The following query retrieves all connection properties that have been set in the connection string or set through a default value:
SELECT * FROM sys_connection_props WHERE Value <> ''
Columns¶
Name | Type | Description |
---|---|---|
Name | String | The name of the connection property. |
ShortDescription | String | A brief description. |
Type | String | The data type of the connection property. |
Default | String | The default value if one is not explicitly set. |
Values | String | A comma-separated list of possible values. A validation error is thrown if another value is specified. |
Value | String | The value you set or a preconfigured default. |
Required | Boolean | Whether the property is required to connect. |
Category | String | The category of the connection property. |
IsSessionProperty | String | Whether the property is a session property, used to save information about the current connection. |
Sensitivity | String | The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms. |
PropertyName | String | A camel-cased truncated form of the connection property name. |
Ordinal | Int32 | The index of the parameter. |
CatOrdinal | Int32 | The index of the parameter category. |
Hierarchy | String | Shows dependent properties associated that need to be set alongside this one. |
Visible | Boolean | Informs whether the property is visible in the connection UI. |
ETC | String | Various miscellaneous information about the property. |
sys_sqlinfo¶
Describes the SELECT query processing that the connector can offload to the data source.
Collaborative Query Processing¶
When working with data sources that do not support SQL-92, you can query the sys_sqlinfo view to determine the query capabilities of the underlying APIs, expressed in SQL syntax. The connector offloads as much of the SELECT statement processing as possible to the server and then processes the rest of the query in memory.
Discover the Data Source's SELECT Capabilities¶
Below is an example data set of SQL capabilities. The following result set indicates the SELECT functionality that the connector can offload to the data source or process client side. Your data source may support additional SQL syntax. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.
Name | Description | Possible Values |
---|---|---|
AGGREGATE_FUNCTIONS | Supported aggregation functions. | AVG , COUNT , MAX , MIN , SUM , DISTINCT |
COUNT | Whether COUNT function is supported. | YES , NO |
IDENTIFIER_QUOTE_OPEN_CHAR | The opening character used to escape an identifier. | [ |
IDENTIFIER_QUOTE_CLOSE_CHAR | The closing character used to escape an identifier. | ] |
SUPPORTED_OPERATORS | A list of supported SQL operators. | = , > , < , >= , <= , <> , != , LIKE , NOT LIKE , IN , NOT IN , IS NULL , IS NOT NULL , AND , OR |
GROUP_BY | Whether GROUP BY is supported, and, if so, the degree of support. | NO , NO_RELATION , EQUALS_SELECT , SQL_GB_COLLATE |
STRING_FUNCTIONS | Supported string functions. | LENGTH , CHAR , LOCATE , REPLACE , SUBSTRING , RTRIM , LTRIM , RIGHT , LEFT , UCASE , SPACE , SOUNDEX , LCASE , CONCAT , ASCII , REPEAT , OCTET , BIT , POSITION , INSERT , TRIM , UPPER , REGEXP , LOWER , DIFFERENCE , CHARACTER , SUBSTR , STR , REVERSE , PLAN , UUIDTOSTR , TRANSLATE , TRAILING , TO , STUFF , STRTOUUID , STRING , SPLIT , SORTKEY , SIMILAR , REPLICATE , PATINDEX , LPAD , LEN , LEADING , KEY , INSTR , INSERTSTR , HTML , GRAPHICAL , CONVERT , COLLATION , CHARINDEX , BYTE |
NUMERIC_FUNCTIONS | Supported numeric functions. | ABS , ACOS , ASIN , ATAN , ATAN2 , CEILING , COS , COT , EXP , FLOOR , LOG , MOD , SIGN , SIN , SQRT , TAN , PI , RAND , DEGREES , LOG10 , POWER , RADIANS , ROUND , TRUNCATE |
TIMEDATE_FUNCTIONS | Supported date/time functions. | NOW , CURDATE , DAYOFMONTH , DAYOFWEEK , DAYOFYEAR , MONTH , QUARTER , WEEK , YEAR , CURTIME , HOUR , MINUTE , SECOND , TIMESTAMPADD , TIMESTAMPDIFF , DAYNAME , MONTHNAME , CURRENT_DATE , CURRENT_TIME , CURRENT_TIMESTAMP , EXTRACT |
REPLICATION_SKIP_TABLES | Indicates tables skipped during replication. | |
REPLICATION_TIMECHECK_COLUMNS | A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication. | |
IDENTIFIER_PATTERN | String value indicating what string is valid for an identifier. | |
SUPPORT_TRANSACTION | Indicates if the provider supports transactions such as commit and rollback. | YES , NO |
DIALECT | Indicates the SQL dialect to use. | |
KEY_PROPERTIES | Indicates the properties which identify the uniform database. | |
SUPPORTS_MULTIPLE_SCHEMAS | Indicates if multiple schemas may exist for the provider. | YES , NO |
SUPPORTS_MULTIPLE_CATALOGS | Indicates if multiple catalogs may exist for the provider. | YES , NO |
DATASYNCVERSION | The Data Sync version needed to access this driver. | Standard , Starter , Professional , Enterprise |
DATASYNCCATEGORY | The Data Sync category of this driver. | Source , Destination , Cloud Destination |
SUPPORTSENHANCEDSQL | Whether enhanced SQL functionality beyond what is offered by the API is supported. | TRUE , FALSE |
SUPPORTS_BATCH_OPERATIONS | Whether batch operations are supported. | YES , NO |
SQL_CAP | All supported SQL capabilities for this driver. | SELECT , INSERT , DELETE , UPDATE , TRANSACTIONS , ORDERBY , OAUTH , ASSIGNEDID , LIMIT , LIKE , BULKINSERT , COUNT , BULKDELETE , BULKUPDATE , GROUPBY , HAVING , AGGS , OFFSET , REPLICATE , COUNTDISTINCT , JOINS , DROP , CREATE , DISTINCT , INNERJOINS , SUBQUERIES , ALTER , MULTIPLESCHEMAS , GROUPBYNORELATION , OUTERJOINS , UNIONALL , UNION , UPSERT , GETDELETED , CROSSJOINS , GROUPBYCOLLATE , MULTIPLECATS , FULLOUTERJOIN , MERGE , JSONEXTRACT , BULKUPSERT , SUM , SUBQUERIESFULL , MIN , MAX , JOINSFULL , XMLEXTRACT , AVG , MULTISTATEMENTS , FOREIGNKEYS , CASE , LEFTJOINS , COMMAJOINS , WITH , LITERALS , RENAME , NESTEDTABLES , EXECUTE , BATCH , BASIC , INDEX |
PREFERRED_CACHE_OPTIONS | A string value specifies the preferred cacheOptions. | |
ENABLE_EF_ADVANCED_QUERY | Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side. | YES , NO |
PSEUDO_COLUMNS | A string array indicating the available pseudo columns. | |
MERGE_ALWAYS | If the value is true, The Merge Mode is forcibly executed in Data Sync. | TRUE , FALSE |
REPLICATION_MIN_DATE_QUERY | A select query to return the replicate start datetime. | |
REPLICATION_MIN_FUNCTION | Allows a provider to specify the formula name to use for executing a server side min. | |
REPLICATION_START_DATE | Allows a provider to specify a replicate startdate. | |
REPLICATION_MAX_DATE_QUERY | A select query to return the replicate end datetime. | |
REPLICATION_MAX_FUNCTION | Allows a provider to specify the formula name to use for executing a server side max. | |
IGNORE_INTERVALS_ON_INITIAL_REPLICATE | A list of tables which will skip dividing the replicate into chunks on the initial replicate. | |
CHECKCACHE_USE_PARENTID | Indicates whether the CheckCache statement should be done against the parent key column. | TRUE , FALSE |
CREATE_SCHEMA_PROCEDURES | Indicates stored procedures that can be used for generating schema files. |
The following query retrieves the operators that can be used in the WHERE clause:
SELECT * FROM sys_sqlinfo WHERE Name='SUPPORTED_OPERATORS'
Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.
Columns¶
Name | Type | Description |
---|---|---|
NAME | String | A component of SQL syntax, or a capability that can be processed on the server. |
VALUE | String | Detail on the supported SQL or SQL syntax. |
sys_identity¶
Returns information about attempted modifications.
The following query retrieves the Ids of the modified rows in a batch operation:
SELECT * FROM sys_identity
Columns¶
Name | Type | Description |
---|---|---|
Id | String | The database-generated ID returned from a data modification operation. |
Batch | String | An identifier for the batch. 1 for a single operation. |
Operation | String | The result of the operation in the batch: INSERTED, UPDATED, or DELETED. |
Message | String | SUCCESS or an error message if the update in the batch failed. |
Stored Procedures¶
Stored procedures are available to complement the data available from the Data Model. It may be necessary to update data available from a view using a stored procedure because the data does not provide for direct, table-like, two-way updates. In these situations, the retrieval of the data is done using the appropriate view or table, while the update is done by calling a stored procedure. Stored procedures take a list of parameters and return back a dataset that contains the collection of tuples that constitute the response.
GraphQL Connector Stored Procedures¶
Name | Description |
---|---|
CreateSchema | Creates a schema file for the specified table or view. |
GetOAuthAccessToken | Obtains the OAuth access token to be used for authentication with data sources using OAuth. |
GetOAuthAuthorizationURL | Obtains the OAuth authorization URL used for authentication with data sources using OAuth. |
RefreshOAuthAccessToken | Exchanges a refresh token for a new access token. |
CreateSchema¶
Creates a schema file for the specified table or view.
Input¶
Name | Type | Description |
---|---|---|
TableName | String | The name of the table or view. |
FileName | String | The full file path and name of the schema to generate. Ex : 'C:\Users\User\Desktop\GraphQL\Businesses.rsd' |
Result Set Columns¶
Name | Type | Description |
---|---|---|
Result | String | Returns Success or Failure. |
GetOAuthAccessToken¶
Obtains the OAuth access token to be used for authentication with data sources using OAuth.
Input¶
Name | Type | Description |
---|---|---|
Other_Options | String | Other options to control behavior of OAuth. |
Cert | String | Path for a personal certificate .pfx file. Only available for OAuth 1.0. |
Cert_Password | String | Personal certificate password. Only available for OAuth 1.0. |
AuthToken | String | The request token returned by GetOAuthAuthorizationUrl. Available only for OAuth 1.0. |
AuthKey | String | The request secret key returned by GetOAuthAuthorizationUrl. Available only for OAuth 1.0. |
AuthSecret | String | The legacy name for AuthKey, included for compatibility. |
Sign_Method | String | The signature method used to calculate the signature for OAuth 1.0. The allowed values are HMAC-SHA1, PLAINTEXT. The default value is HMAC-SHA1. |
GrantType | String | Authorization grant type. Only available for OAuth 2.0. The allowed values are CODE, PASSWORD, CLIENT, REFRESH. |
Post_Data | String | The post data to submit, if any. |
AuthMode | String | The type of authentication mode to use. The allowed values are APP, WEB. The default value is WEB. |
Verifier | String | The verifier code returned by the data source after permission for the app to connect has been granted. WEB AuthMode only. |
Scope | String | The scope of access to the APIs. By default, access to all APIs used by this data provider will be specified. |
CallbackURL | String | This field determines where the response is sent. |
ApprovalPrompt | String | This field indicates if the user should be reprompted for consent. The default is AUTO, so a given user should only see the consent page for a given set of scopes the first time through the sequence. If set to FORCE, then the user sees a consent page even if they have previously given consent to your application for a given set of scopes. |
AccessType | String | This field indicates if your application needs to access a Google API when the user is not present at the browser. This parameter defaults to ONLINE. If your application needs to refresh access tokens when the user is not present at the browser, then use OFFLINE. This will result in your application obtaining a refresh token the first time your application exchanges an authorization code for a user. |
State | String | This field indicates any state that may be useful to your application upon receipt of the response. Your application receives the same value it sent, as this parameter makes a round-trip to Google authorization server and back. Uses include redirecting the user to the correct resource in your site, using nonces, and mitigating cross-site request forgery. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
OAuthAccessToken | String | The authentication token returned from Google. This can be used in subsequent calls to other operations for this particular service. |
OAuthAccessTokenSecret | String | The OAuth access token secret. |
OAuthRefreshToken | String | A token that may be used to obtain a new access token. |
ExpiresIn | String | The remaining lifetime on the access token. |
\* | String | Other outputs that may be returned by the data source. |
GetOAuthAuthorizationURL¶
Obtains the OAuth authorization URL used for authentication with data sources using OAuth.
Input¶
Name | Type | Description |
---|---|---|
Cert | String | Path for a personal certificate .pfx file. Only available for OAuth 1.0. |
Cert_Password | String | Personal certificate password. Only available for OAuth 1.0. |
Sign_Method | String | The signature method used to calculate the signature for OAuth 1.0. The allowed values are HMAC-SHA1, PLAINTEXT. The default value is HMAC-SHA1. |
Scope | String | The scope of access to the APIs. By default, access to all APIs used by this data provider will be specified. |
CallbackURL | String | The URL the user will be redirected to after authorizing your application. |
ApprovalPrompt | String | This field indicates if the user should be reprompted for consent. The default is AUTO, so a given user should only see the consent page for a given set of scopes the first time through the sequence. If the value is FORCE, then the user sees a consent page even if they have previously given consent to your application for a given set of scopes. |
AccessType | String | This field indicates if your application needs to access a Google API when the user is not present at the browser. This parameter defaults to ONLINE. If your application needs to refresh access tokens when the user is not present at the browser, then use OFFLINE. This will result in your application obtaining a refresh token the first time your application exchanges an authorization code for a user. |
State | String | This field indicates any state that may be useful to your application upon receipt of the response. Your application receives the same value it sent, as this parameter makes a round-trip to the Google authorization server and back. Possible uses include redirecting the user to the correct resource in your site, using nonces, and mitigating cross-site request forgery. |
Other_Options | String | Other options to control the behavior of OAuth. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
AuthToken | String | The authorization token, passed into the GetOAuthAccessToken stored procedure. |
AuthKey | String | The authorization secret token, passed into the GetOAuthAccessToken stored procedure. |
URL | String | The URL to complete user authentication. |
RefreshOAuthAccessToken¶
Exchanges a refresh token for a new access token.
Input¶
Name | Type | Description |
---|---|---|
OAuthRefreshToken | String | The refresh token returned from the original authorization code exchange. |
Result Set Columns¶
Name | Type | Description |
---|---|---|
OAuthAccessToken | String | The authentication token returned from the data source. This can be used in subsequent calls to other operations for this particular service. |
OAuthAccessTokenSecret | String | The new OAuthAccessTokenSecret returned from the service. |
OAuthRefreshToken | String | The authentication token returned from the data source. This can be used in subsequent calls to other operations for this particular service. |
ExpiresIn | String | The remaining lifetime on the access token. |
Advanced Configurations Properties¶
The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to remote services. |
URL | The URL of the GraphQL service. |
User | The GraphQL user account used to authenticate. |
Password | The password used to authenticate the user. |
Property | Description |
---|---|
AWSCognitoRegion | The hosting region for AWS Cognito. |
AWSUserPoolId | The User Pool Id. |
AWSUserPoolClientAppId | The User Pool Client App Id. |
AWSUserPoolClientAppSecret | Optional. The User Pool Client App Secret. |
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthVersion | The version of OAuth being used. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthAccessTokenSecret | The OAuth access token secret for connecting using OAuth. |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthGrantType | The grant type for the OAuth flow. |
OAuthIncludeCallbackURL | Whether to include the callback URL in an access token request. |
OAuthAuthorizationURL | The authorization URL for the OAuth service. |
OAuthAccessTokenURL | The URL to retrieve the OAuth access token from. |
OAuthRefreshTokenURL | The URL to refresh the OAuth token from. |
OAuthRequestTokenURL | The URL the service provides to retrieve request tokens from. This is required in OAuth 1.0. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
AuthToken | The authentication token used to request and obtain the OAuth Access Token. |
AuthKey | The authentication secret used to request and obtain the OAuth Access Token. |
OAuthParams | A comma-separated list of other parameters to submit in the request for the OAuth access token in the format paramname=value. |
OAuthRefreshToken | The OAuth refresh token for the corresponding OAuth access token. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
Property | Description |
---|---|
OAuthJWTCert | The JWT Certificate store. |
OAuthJWTCertType | The type of key store containing the JWT Certificate. |
OAuthJWTCertPassword | The password for the OAuth JWT certificate. |
OAuthJWTCertSubject | The subject of the OAuth JWT certificate. |
OAuthJWTIssuer | The issuer of the Java Web Token. |
OAuthJWTSubject | The user subject for which the application is requesting delegated access. |
Property | Description |
---|---|
SSLClientCert | The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). |
SSLClientCertType | The type of key store containing the TLS/SSL client certificate. |
SSLClientCertPassword | The password for the TLS/SSL client certificate. |
SSLClientCertSubject | The subject of the TLS/SSL client certificate. |
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
ExpandTablesDepth | This property is used to determine the depth of the child tables. |
ExpandTemporaryTablesDepth | This property is used to determine the depth of the child temporary tables. Only works if ExposeDynamicProcedures is set to true. |
ExpandColumnsDepth | This property is used to determine how far the provider should search for columns inside the GraphQL objects. |
IncludeDeprecatedMetadata | This property is used to determine whether the provider should expose deprecated tables and columns or not. |
ExposeDynamicProcedures | This property is used to determine whether the provider should expose mutations as dynamic procedures or not. |
Property | Description |
---|---|
CustomHeaders | Other headers as determined by the user (optional). |
GenerateSchemaFiles | Indicates the user preference as to when schemas should be generated and saved. |
MaxRows | Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from GraphQL. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
Authentication¶
This section provides a complete list of authentication properties you can configure.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to remote services. |
URL | The URL of the GraphQL service. |
User | The GraphQL user account used to authenticate. |
Password | The password used to authenticate the user. |
AuthScheme¶
The type of authentication to use when connecting to remote services.
Possible Values¶
None
, Basic
, OAuth
, AwsCognitoSrp
, AwsCognitoBasic
Data Type¶
string
Default Value¶
None
Remarks¶
General¶
The following options are generally available to all connections:
- None: Uses no authentication.
- Basic: Uses Basic authentication with User and Password.
- OAuth: Uses either OAuth1 or OAuth2, with the specific flow being determined by the OAuthGrantType. OAuthVersion must be set to determine what version of OAuth is used.
- AwsCognitoSrp: Set to use Cognito based authentication. This is recommended over AwsCognitoBasic because this option does NOT send the password to the server for authentication, instead it uses the SRP protocol.
- AwsCognitoBasic: Set to use Cognito based authentication.
URL¶
The URL of the GraphQL service.
Data Type¶
string
Default Value¶
""
Remarks¶
The URL of the GraphQL service.
User¶
The GraphQL user account used to authenticate.
Data Type¶
string
Default Value¶
""
Remarks¶
Together with Password, this field is used to authenticate against the GraphQL server.
Password¶
The password used to authenticate the user.
Data Type¶
string
Default Value¶
""
Remarks¶
The User and Password
are together used to authenticate with the server.
AWS Authentication¶
This section provides a complete list of AWS authentication properties you can configure.
Property | Description |
---|---|
AWSCognitoRegion | The hosting region for AWS Cognito. |
AWSUserPoolId | The User Pool Id. |
AWSUserPoolClientAppId | The User Pool Client App Id. |
AWSUserPoolClientAppSecret | Optional. The User Pool Client App Secret. |
AWSCognitoRegion¶
The hosting region for AWS Cognito.
Possible Values¶
OHIO
, NORTHERNVIRGINIA
, NORTHERNCALIFORNIA
, OREGON
, CAPETOWN
, HONGKONG
, MUMBAI
, OSAKA
, SEOUL
, SINGAPORE
, SYDNEY
, TOKYO
, CENTRAL
, BEIJING
, NINGXIA
, FRANKFURT
, IRELAND
, LONDON
, MILAN
, PARIS
, STOCKHOLM
, BAHRAIN
, SAOPAULO
, GOVCLOUDEAST
, GOVCLOUDWEST
Data Type¶
string
Default Value¶
NORTHERNVIRGINIA
Remarks¶
The hosting region for AWS Cognito. Available values are OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, TOKYO, CENTRAL, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, STOCKHOLM, BAHRAIN, SAOPAULO, GOVCLOUDEAST, and GOVCLOUDWEST.
AWSUserPoolId¶
The User Pool Id.
Data Type¶
string
Default Value¶
""
Remarks¶
You can find this in AWS Cognito -> Manage User Pools -> select your user pool -> General settings -> Pool Id.
AWSUserPoolClientAppId¶
The User Pool Client App Id.
Data Type¶
string
Default Value¶
""
Remarks¶
You can find this in AWS Cognito -> Manage Identity Pools -> select your user pool -> General settings -> App clients -> App client Id.
AWSUserPoolClientAppSecret¶
Optional. The User Pool Client App Secret.
Data Type¶
string
Default Value¶
""
Remarks¶
You can find this in AWS Cognito -> Manage Identity Pools -> select your user pool -> General settings -> App clients -> App client secret.
OAuth¶
This section provides a complete list of OAuth properties you can configure.
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthVersion | The version of OAuth being used. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthAccessTokenSecret | The OAuth access token secret for connecting using OAuth. |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthGrantType | The grant type for the OAuth flow. |
OAuthIncludeCallbackURL | Whether to include the callback URL in an access token request. |
OAuthAuthorizationURL | The authorization URL for the OAuth service. |
OAuthAccessTokenURL | The URL to retrieve the OAuth access token from. |
OAuthRefreshTokenURL | The URL to refresh the OAuth token from. |
OAuthRequestTokenURL | The URL the service provides to retrieve request tokens from. This is required in OAuth 1.0. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
AuthToken | The authentication token used to request and obtain the OAuth Access Token. |
AuthKey | The authentication secret used to request and obtain the OAuth Access Token. |
OAuthParams | A comma-separated list of other parameters to submit in the request for the OAuth access token in the format paramname=value. |
OAuthRefreshToken | The OAuth refresh token for the corresponding OAuth access token. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
InitiateOAuth¶
Set this property to initiate the process to obtain or refresh the OAuth access token when you connect.
Possible Values¶
OFF
, GETANDREFRESH
, REFRESH
Data Type¶
string
Default Value¶
OFF
Remarks¶
The following options are available:
OFF
: Indicates that the OAuth flow will be handled entirely by the user. An OAuthAccessToken will be required to authenticate.GETANDREFRESH
: Indicates that the entire OAuth Flow will be handled by the connector. If no token currently exists, it will be obtained by prompting the user via the browser. If a token exists, it will be refreshed when applicable.REFRESH
: Indicates that the connector will only handle refreshing the OAuthAccessToken. The user will never be prompted by the connector to authenticate via the browser. The user must handle obtaining the OAuthAccessToken and OAuthRefreshToken initially.
OAuthVersion¶
The version of OAuth being used.
Possible Values¶
Disabled
, 1.0
, 2.0
Data Type¶
string
Default Value¶
Disabled
Remarks¶
The version of OAuth being used. The following options are available: Disabled,1.0,2.0
OAuthClientId¶
The client ID assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId
value, sometimes also called a consumer key, and a client secret, the OAuthClientSecret.
OAuthClientSecret¶
The client secret assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId, also called a consumer key. You will also receive a client secret, also called a consumer secret. Set the client secret in the OAuthClientSecret
property.
OAuthAccessToken¶
The access token for connecting using OAuth.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthAccessToken
property is used to connect using OAuth. The OAuthAccessToken
is retrieved from the OAuth server as part of the authentication process. It has a server-dependent timeout and can be reused between requests.
The access token is used in place of your user name and password. The access token protects your credentials by keeping them on the server.
OAuthSettingsLocation¶
The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH. Alternatively, you can hold this location in memory by specifying a value starting with 'memory://'
.
Data Type¶
string
Default Value¶
%APPDATA%\CData\Acumatica Data Provider\OAuthSettings.txt
Remarks¶
When InitiateOAuth is set to GETANDREFRESH
or REFRESH
, the driver saves OAuth values to avoid requiring the user to manually enter OAuth connection properties and to allow the credentials to be shared across connections or processes.
Instead of specifying a file path, you can use memory storage. Memory locations are specified by using a value starting with 'memory://'
followed by a unique identifier for that set of credentials (for example, memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike file-based storage, where credentials persist across connections, memory storage loads the credentials into static memory, and the credentials are shared between connections using the same identifier for the life of the process. To persist credentials outside the current process, you must manually store the credentials prior to closing the connection. This enables you to set them in the connection when the process is started again. You can retrieve OAuth property values with a query to the sys_connection_props
system table. If there are multiple connections using the same credentials, the properties are read from the previously closed connection.
The default location is "%APPDATA%\CData\Acumatica Data Provider\OAuthSettings.txt" with %APPDATA%
set to the user's configuration directory. The default values are
- Windows: "
register://%DSN
" - Unix: "%AppData%..."
where DSN is the name of the current DSN used in the open connection.
The following table lists the value of %APPDATA%
by OS:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Linux | ~/.config |
OAuthAccessTokenSecret¶
The OAuth access token secret for connecting using OAuth.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthAccessTokenSecret
property is used to connect and authenticate using OAuth. The OAuthAccessTokenSecret
is retrieved from the OAuth server as part of the authentication process. It is used with the OAuthAccessToken and can be used for multiple requests until it times out.
CallbackURL¶
The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings.
Data Type¶
string
Default Value¶
""
Remarks¶
During the authentication process, the OAuth authorization server redirects the user to this URL. This value must match the callback URL you specify in your app settings.
OAuthGrantType¶
The grant type for the OAuth flow.
Possible Values¶
CODE
, CLIENT
, PASSWORD
Data Type¶
string
Default Value¶
CLIENT
Remarks¶
The grant type for the OAuth flow. The following options are available: CODE,CLIENT,PASSWORD
OAuthIncludeCallbackURL¶
Whether to include the callback URL in an access token request.
Data Type¶
bool
Default Value¶
true
Remarks¶
This defaults to true since standards-compliant OAuth services will ignore the redirect_uri parameter for grant types like CLIENT or PASSWORD that do not require it.
This option should only be enabled for OAuth services that report errors when redirect_uri is included.
OAuthAuthorizationURL¶
The authorization URL for the OAuth service.
Data Type¶
string
Default Value¶
""
Remarks¶
The authorization URL for the OAuth service. At this URL, the user logs into the server and grants permissions to the application. In OAuth 1.0, if permissions are granted, the request token is authorized.
OAuthAccessTokenURL¶
The URL to retrieve the OAuth access token from.
Data Type¶
string
Default Value¶
""
Remarks¶
The URL to retrieve the OAuth access token from. In OAuth 1.0, the authorized request token is exchanged for the access token at this URL.
OAuthRefreshTokenURL¶
The URL to refresh the OAuth token from.
Data Type¶
string
Default Value¶
""
Remarks¶
The URL to refresh the OAuth token from. In OAuth 2.0, this URL is where the refresh token is exchanged for a new access token when the old access token expires.
OAuthRequestTokenURL¶
The URL the service provides to retrieve request tokens from. This is required in OAuth 1.0.
Data Type¶
string
Default Value¶
""
Remarks¶
The URL the service provides to retrieve request tokens from. This is required in OAuth 1.0. In OAuth 1.0, this is the URL where the app makes a request for the request token.
OAuthVerifier¶
The verifier code returned from the OAuth authorization URL.
Data Type¶
string
Default Value¶
""
Remarks¶
The verifier code returned from the OAuth authorization URL. This can be used on systems where a browser cannot be launched such as headless systems.
Authentication on Headless Machines¶
See to obtain the OAuthVerifier
value.
Set OAuthSettingsLocation along with OAuthVerifier
. When you connect, the connector exchanges the OAuthVerifier
for the OAuth authentication tokens and saves them, encrypted, to the specified file. Set InitiateOAuth to GETANDREFRESH automate the exchange.
Once the OAuth settings file has been generated, you can remove OAuthVerifier
from the connection properties and connect with OAuthSettingsLocation set.
To automatically refresh the OAuth token values, set OAuthSettingsLocation and additionally set InitiateOAuth to REFRESH.
AuthToken¶
The authentication token used to request and obtain the OAuth Access Token.
Data Type¶
string
Default Value¶
""
Remarks¶
This property is required only when performing headless authentication in OAuth 1.0. It can be obtained from the GetOAuthAuthorizationUrl stored procedure.
It can be supplied alongside the AuthKey in the GetOAuthAccessToken stored procedure to obtain the OAuthAccessToken.
AuthKey¶
The authentication secret used to request and obtain the OAuth Access Token.
Data Type¶
string
Default Value¶
""
Remarks¶
This property is required only when performing headless authentication in OAuth 1.0. It can be obtained from the GetOAuthAuthorizationUrl stored procedure.
It can be supplied alongside the AuthToken in the GetOAuthAccessToken stored procedure to obtain the OAuthAccessToken.
OAuthParams¶
A comma-separated list of other parameters to submit in the request for the OAuth access token in the format paramname=value.
Data Type¶
string
Default Value¶
""
Remarks¶
A comma-separated list of other parameters to submit in the request for the OAuth access token in the format paramname=value.
OAuthRefreshToken¶
The OAuth refresh token for the corresponding OAuth access token.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthRefreshToken
property is used to refresh the OAuthAccessToken when using OAuth authentication.
OAuthExpiresIn¶
The lifetime in seconds of the OAuth AccessToken.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthTokenTimestamp to determine when the AccessToken will expire.
OAuthTokenTimestamp¶
The Unix epoch timestamp in milliseconds when the current Access Token was created.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthExpiresIn to determine when the AccessToken will expire.
JWT OAuth¶
This section provides a complete list of JWT OAuth properties you can configure.
Property | Description |
---|---|
OAuthJWTCert | The JWT Certificate store. |
OAuthJWTCertType | The type of key store containing the JWT Certificate. |
OAuthJWTCertPassword | The password for the OAuth JWT certificate. |
OAuthJWTCertSubject | The subject of the OAuth JWT certificate. |
OAuthJWTIssuer | The issuer of the Java Web Token. |
OAuthJWTSubject | The user subject for which the application is requesting delegated access. |
OAuthJWTCert¶
The JWT Certificate store.
Data Type¶
string
Default Value¶
""
Remarks¶
The name of the certificate store for the client certificate.
The OAuthJWTCertType field specifies the type of the certificate store specified by OAuthJWTCert
. If the store is password protected, specify the password in OAuthJWTCertPassword.
OAuthJWTCert
is used in conjunction with the OAuthJWTCertSubject
field in order to specify client certificates. If OAuthJWTCert
has a value, and OAuthJWTCertSubject is set, a search for a certificate is initiated. Please refer to the OAuthJWTCertSubject field for details.
Designations of certificate stores are platform-dependent.
The following are designations of the most common User and Machine certificate stores in Windows:
Property | Description |
---|---|
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
SPC | Software publisher certificates. |
In Java, the certificate store normally is a file containing certificates and optional private keys.
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (i.e. PKCS12 certificate store).
OAuthJWTCertType¶
The type of key store containing the JWT Certificate.
Possible Values¶
USER
, MACHINE
, PFXFILE
, PFXBLOB
, JKSFILE
, JKSBLOB
, PEMKEY_FILE
, PEMKEY_BLOB
, PUBLIC_KEY_FILE
, PUBLIC_KEY_BLOB
, SSHPUBLIC_KEY_FILE
, SSHPUBLIC_KEY_BLOB
, P7BFILE
, PPKFILE
, XMLFILE
, XMLBLOB
Data Type¶
string
Default Value¶
USER
Remarks¶
This property can take one of the following values:
Property | Description |
---|---|
USER | For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note: This store type is not available in Java. |
MACHINE | For Windows, this specifies that the certificate store is a machine store. Note: this store type is not available in Java. |
PFXFILE | The certificate store is the name of a PFX (PKCS12) file containing certificates. |
PFXBLOB | The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format. |
JKSFILE | The certificate store is the name of a Java key store (JKS) file containing certificates. Note: this store type is only available in Java. |
JKSBLOB | The certificate store is a string (base-64-encoded) representing a certificate store in Java key store (JKS) format. Note: this store type is only available in Java. |
PEMKEY_FILE | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
PEMKEY_BLOB | The certificate store is a string (base64-encoded) that contains a private key and an optional certificate. |
PUBLIC_KEY_FILE | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
PUBLIC_KEY_BLOB | The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate. |
SSHPUBLIC_KEY_FILE | The certificate store is the name of a file that contains an SSH-style public key. |
SSHPUBLIC_KEY_BLOB | The certificate store is a string (base-64-encoded) that contains an SSH-style public key. |
P7BFILE | The certificate store is the name of a PKCS7 file containing certificates. |
PPKFILE | The certificate store is the name of a file that contains a PPK (PuTTY Private Key). |
XMLFILE | The certificate store is the name of a file that contains a certificate in XML format. |
XMLBLOB | The certificate store is a string that contains a certificate in XML format. |
OAuthJWTCertPassword¶
The password for the OAuth JWT certificate.
Data Type¶
string
Default Value¶
""
Remarks¶
If the certificate store is of a type that requires a password, this property is used to specify that password in order to open the certificate store.
OAuthJWTCertSubject¶
The subject of the OAuth JWT certificate.
Data Type¶
string
Default Value¶
*
Remarks¶
When loading a certificate the subject is used to locate the certificate in the store.
If an exact match is not found, the store is searched for subjects containing the value of the property.
If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks the first certificate in the certificate store.
The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=example@jbexample.com". Common fields and their meanings are displayed below.
Field | Meaning |
---|---|
CN | Common Name. This is commonly a host name like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma it must be quoted.
OAuthJWTIssuer¶
The issuer of the Java Web Token.
Data Type¶
string
Default Value¶
""
Remarks¶
The issuer of the Java Web Token. This is typically either the Client ID or Email Address of the OAuth Application.
OAuthJWTSubject¶
The user subject for which the application is requesting delegated access.
Data Type¶
string
Default Value¶
""
Remarks¶
The user subject for which the application is requesting delegated access. Typically, the user account name or email address.
SSL¶
This section provides a complete list of SSL properties you can configure.
Property | Description |
---|---|
SSLClientCert | The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL). |
SSLClientCertType | The type of key store containing the TLS/SSL client certificate. |
SSLClientCertPassword | The password for the TLS/SSL client certificate. |
SSLClientCertSubject | The subject of the TLS/SSL client certificate. |
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
SSLClientCert¶
The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
Data Type¶
string
Default Value¶
""
Remarks¶
The name of the certificate store for the client certificate.
The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert
. If the store is password protected, specify the password in SSLClientCertPassword.
SSLClientCert
is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert
has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.
Designations of certificate stores are platform-dependent.
The following are designations of the most common User and Machine certificate stores in Windows:
Property | Description |
---|---|
MY | A certificate store holding personal certificates with their associated private keys. |
CA | Certifying authority certificates. |
ROOT | Root certificates. |
SPC | Software publisher certificates. |
In Java, the certificate store normally is a file containing certificates and optional private keys.
When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).
SSLClientCertType¶
The type of key store containing the TLS/SSL client certificate.
Possible Values¶
USER
, MACHINE
, PFXFILE
, PFXBLOB
, JKSFILE
, JKSBLOB
, PEMKEY_FILE
, PEMKEY_BLOB
, PUBLIC_KEY_FILE
, PUBLIC_KEY_BLOB
, SSHPUBLIC_KEY_FILE
, SSHPUBLIC_KEY_BLOB
, P7BFILE
, PPKFILE
, XMLFILE
, XMLBLOB
Data Type¶
string
Default Value¶
USER
Remarks¶
This property can take one of the following values:
Property | Description |
---|---|
USER - default | For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java. |
MACHINE | For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java. |
PFXFILE | The certificate store is the name of a PFX (PKCS12) file containing certificates. |
PFXBLOB | The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format. |
JKSFILE | The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java. |
JKSBLOB | The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java. |
PEMKEY_FILE | The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate. |
PEMKEY_BLOB | The certificate store is a string (base64-encoded) that contains a private key and an optional certificate. |
PUBLIC_KEY_FILE | The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate. |
PUBLIC_KEY_BLOB | The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate. |
SSHPUBLIC_KEY_FILE | The certificate store is the name of a file that contains an SSH-style public key. |
SSHPUBLIC_KEY_BLOB | The certificate store is a string (base-64-encoded) that contains an SSH-style public key. |
P7BFILE | The certificate store is the name of a PKCS7 file containing certificates. |
PPKFILE | The certificate store is the name of a file that contains a PuTTY Private Key (PPK). |
XMLFILE | The certificate store is the name of a file that contains a certificate in XML format. |
XMLBLOB | The certificate store is a string that contains a certificate in XML format. |
SSLClientCertPassword¶
The password for the TLS/SSL client certificate.
Data Type¶
string
Default Value¶
""
Remarks¶
If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.
SSLClientCertSubject¶
The subject of the TLS/SSL client certificate.
Data Type¶
string
Default Value¶
*
Remarks¶
When loading a certificate the subject is used to locate the certificate in the store.
If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.
The special value "*" picks the first certificate in the certificate store.
The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, E=support@company.com". The common fields and their meanings are shown below.
Field | Meaning |
---|---|
CN | Common Name. This is commonly a host name like www.server.com. |
O | Organization |
OU | Organizational Unit |
L | Locality |
S | State |
C | Country |
E | Email Address |
If a field value contains a comma, it must be quoted.
SSLServerCert¶
The certificate to be accepted from the server when connecting using TLS/SSL.
Data Type¶
string
Default Value¶
""
Remarks¶
If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.
This property can take the following forms:
Description | Example |
---|---|
A full PEM Certificate (example shortened for brevity) | -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE----- |
A path to a local file containing the certificate | C:\cert.cer |
The public key (example shortened for brevity) | -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY----- |
The MD5 Thumbprint (hex values can also be either space or colon separated) | ecadbdda5a1529c58a1e9e09828d70e4 |
The SHA1 Thumbprint (hex values can also be either space or colon separated) | 34a929226ae0819f2ec14b4a3d904f801cbb150d |
If not specified, any certificate trusted by the machine is accepted.
Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).
Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.
Schema¶
This section provides a complete list of schema properties you can configure.
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
ExpandTablesDepth | This property is used to determine the depth of the child tables. |
ExpandTemporaryTablesDepth | This property is used to determine the depth of the child temporary tables. Only works if ExposeDynamicProcedures is set to true. |
ExpandColumnsDepth | This property is used to determine how far the provider should search for columns inside the GraphQL objects. |
IncludeDeprecatedMetadata | This property is used to determine whether the provider should expose deprecated tables and columns or not. |
ExposeDynamicProcedures | This property is used to determine whether the provider should expose mutations as dynamic procedures or not. |
Location¶
A path to the directory that contains the schema files defining tables, views, and stored procedures.
Data Type¶
string
Default Value¶
%APPDATA%\GraphQL Data Provider\Schema
Remarks¶
The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location
property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.
If left unspecified, the default location is "%APPDATA%\GraphQL Data Provider\Schema" with %APPDATA%
being set to the user's configuration directory:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Mac | ~/Library/Application Support |
Linux | ~/.config |
BrowsableSchemas¶
This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.
Tables¶
This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
Views¶
Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
ExpandTablesDepth¶
This property is used to determine the depth of the child tables.
Data Type¶
int
Default Value¶
2
Remarks¶
This property is used to determine the depth of the child tables.
ExpandTemporaryTablesDepth¶
This property is used to determine the depth of the child temporary tables. Only works if ExposeDynamicProcedures is set to true.
Data Type¶
int
Default Value¶
5
Remarks¶
This property is used to determine the depth of the child temporary tables. Only works if ExposeDynamicProcedures is set to true.
ExpandColumnsDepth¶
This property is used to determine how far the provider should search for columns inside the GraphQL objects.
Data Type¶
int
Default Value¶
2
Remarks¶
This property is used to determine how far the connector should search for columns inside the GraphQL objects.
IncludeDeprecatedMetadata¶
This property is used to determine whether the provider should expose deprecated tables and columns or not.
Data Type¶
bool
Default Value¶
false
Remarks¶
This property is used to determine whether the connector should expose deprecated tables and columns or not.
ExposeDynamicProcedures¶
This property is used to determine whether the provider should expose mutations as dynamic procedures or not.
Data Type¶
bool
Default Value¶
true
Remarks¶
This property is used to determine whether the connector should expose mutations as dynamic procedures or not.
Miscellaneous¶
This section provides a complete list of miscellaneous properties you can configure.
Property | Description |
---|---|
CustomHeaders | Other headers as determined by the user (optional). |
GenerateSchemaFiles | Indicates the user preference as to when schemas should be generated and saved. |
MaxRows | Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from GraphQL. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
CustomHeaders¶
Other headers as determined by the user (optional).
Data Type¶
string
Default Value¶
""
Remarks¶
This property can be set to a string of headers to be appended to the HTTP request headers created from other properties, like ContentType, From, and so on.
The headers must be of the format "header: value" as described in the HTTP specifications. Header lines should be separated by the carriage return and line feed (CRLF) characters.
Use this property with caution. If this property contains invalid headers, HTTP requests may fail.
This property is useful for fine-tuning the functionality of the connector to integrate with specialized or nonstandard APIs.
GenerateSchemaFiles¶
Indicates the user preference as to when schemas should be generated and saved.
Possible Values¶
Never
, OnUse
, OnStart
, OnCreate
Data Type¶
string
Default Value¶
Never
Remarks¶
This property outputs schemas to .rsd files in the path specified by Location.
Available settings are the following:
- Never: A schema file will never be generated.
- OnUse: A schema file will be generated the first time a table is referenced, provided the schema file for the table does not already exist.
- OnStart: A schema file will be generated at connection time for any tables that do not currently have a schema file.
- OnCreate: A schema file will be generated by when running a CREATE TABLE SQL query.
Note that if you want to regenerate a file, you will first need to delete it.
Generate Schemas with SQL¶
When you set GenerateSchemaFiles
to OnUse
, the connector generates schemas as you execute SELECT queries. Schemas are generated for each table referenced in the query.
When you set GenerateSchemaFiles
to OnCreate
, schemas are only generated when a CREATE TABLE query is executed.
Generate Schemas on Connection¶
Another way to use this property is to obtain schemas for every table in your database when you connect. To do so, set GenerateSchemaFiles
to OnStart
and connect.
MaxRows¶
Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
Data Type¶
int
Default Value¶
-1
Remarks¶
Limits the number of rows returned rows when no aggregation or group by is used in the query. This helps avoid performance issues at design time.
Other¶
These hidden properties are used only in specific use cases.
Data Type¶
string
Default Value¶
""
Remarks¶
The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.
Specify multiple properties in a semicolon-separated list.
Integration and Formatting¶
Property | Description |
---|---|
DefaultColumnSize | Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000. |
ConvertDateTimeToGMT | Determines whether to convert date-time values to GMT, instead of the local time of the machine. |
RecordToFile=filename | Records the underlying socket data transfer to the specified file. |
Pagesize¶
The maximum number of results to return per page from GraphQL.
Data Type¶
string
Default Value¶
""
Remarks¶
The Pagesize
property affects the maximum number of results to return per page from GraphQL. Setting a higher value may result in better performance at the cost of additional memory eaten up per page consumed. The pageSize is proportional to the GraphQL query cost.
PseudoColumns¶
This property indicates whether or not to include pseudo columns as columns to the table.
Data Type¶
string
Default Value¶
""
Remarks¶
This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".
Timeout¶
The value in seconds until the timeout error is thrown, canceling the operation.
Data Type¶
int
Default Value¶
60
Remarks¶
If Timeout
= 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.
If Timeout
expires and the operation is not yet complete, the connector throws an exception.