SAP Hybris C4C Connection Details¶
Introduction¶
Connector Version
This documentation is based on version 23.0.8804 of the connector.
Get Started¶
SAP Cloud for Customer Version Support
The connector supports read/write access to SAP Cloud for Customer through the OData API.
Establish a Connection¶
Connect to SAP Cloud for Customer¶
To identify your SAP Cloud for Customer instance, set the following:
Tenant
: The full domain name of your SAP Cloud for Customer tenant.URL
: The URL corresponding to your SAP Cloud for Customer instance. You must specify this if it differs from the default service of "c4codata". Otherwise, omit this connection property.
Authenticate to SAP Cloud for Customer¶
User Credentials¶
Set the AuthScheme
to Basic
and specify the following:
User
: Your SAP Cloud for Customer username.Password
: Your SAP Cloud for Customer password.
Azure AD¶
Set the AuthScheme
to AzureAD
.
Configure a Custom Extension¶
This configuration requires a custom extension to SAP Hybris. This extension can be created using the yempty tool.
Connection Configuration¶
After configuring your custom extension, set the following to authenticate:
InitiateOAuth
:GETANDREFRESH
.OAuthClientId
: The application ID of the connector application, found in theOverview
section of the app registration.OAuthClientSecret
: The client secret value of the connector application. Azure AD displays this when you create a new client secret.CallbackURL
: The redirect URI of the connector application. For example:https://localhost:33333
SSOProperties
: Set the following additional properties, each separated by a commma, in the formatA=B;C=D;
etc.Resource
: The URL of your environment.AzureTentant
: The ID of the Azure AD tenant where the applications are registered.
Important Notes¶
Configuration Files and Their Paths¶
- All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.
Advanced Features¶
This section details a selection of advanced features of the SAP Cloud for Customer connector.
User Defined Views
The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.
SSL Configuration
Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert
property under "Connection String Options" for more information.
Proxy
To configure the connector using private agent proxy settings, select the Use Proxy Settings
checkbox on the connection configuration screen.
Query Processing
The connector offloads as much of the SELECT statement processing as possible to SAP Cloud for Customer and then processes the rest of the query in memory (client-side).
User Defined Views¶
The Jitterbit Connector for SAP Cloud for Customer allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.
There are two ways to create user defined views:
- Create a JSON-formatted configuration file defining the views you want.
- DDL statements.
Define Views Using a Configuration File¶
User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json
. The connector automatically detects the views specified in this file.
You can also have multiple view definitions and control them using the UserDefinedViews
connection property. When you use this property, only the specified views are seen by the connector.
This User Defined View configuration file is formatted as follows:
- Each root element defines the name of a view.
- Each root element contains a child element, called
query
, which contains the custom SQL query for the view.
For example:
{
"MyView": {
"query": "SELECT * FROM AccountCollection WHERE MyColumn = 'value'"
},
"MyView2": {
"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
}
}
Use the UserDefinedViews
connection property to specify the location of your JSON configuration file. For example:
"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"
Define Views Using DDL Statements¶
The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.
Create a View¶
To create a new view using DDL statements, provide the view name and query as follows:
CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;
If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews
connection property.
Alter a View¶
To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:
ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';
The view is then updated in the JSON configuration file.
Drop a View¶
To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.
DROP LOCAL VIEW [MyViewName]
This removes the view from the JSON configuration file. It can no longer be queried.
Schema for User Defined Views¶
User Defined Views are exposed in the UserViews
schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName
property.
Work with User Defined Views¶
For example, a SQL statement with a User Defined View called UserViews.RCustomers
only lists customers in Raleigh:
SELECT * FROM Customers WHERE City = 'Raleigh';
An example of a query to the driver:
SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';
Resulting in the effective query to the source:
SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';
That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.
SSL Configuration¶
Customize the SSL Configuration¶
By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.
To specify another certificate, see the SSLServerCert
property for the available formats to do so.
Data Model¶
The Jitterbit Connector for SAP Cloud for Customer models SAP Cloud for Customer entities in relational Tables, Views, and Stored Procedures. The table definitions are dynamically obtained from the OData service you connect to. Any changes in the metadata, such as added or removed columns or changes in data type, can be loaded by reconnecting.
Tables
The connector models the writable entity sets described in the service metadata document as bidirectional Tables.
Views
Read-only entity sets are modeled as Views. Additionally, some SAP Cloud for Customer entities can only be accessed through Navigation Properties. The connector models navigation properties as separate Views.
Tables¶
The connector exposes tables for every entity set and singleton defined on the OData service document. Entities on these tables may be inserted, updated, or deleted using standard SQL insert, update, or delete statements.
Executing Deep Inserts with SQL¶
The connector supports OData deep inserts, in which you simultaneously create a base entity and link it to related entities, by specifying navigation properties. To specify Navigation Properties for an entity, you create a temporary table for the navigation property and then reference the temporary table in the insert to the base table. Reference the temporary table in the appropriate navigation property column on the base table. Each navigation property column is prefixed with the word "Linked".
Note that you must define the temporary tables and insert to the base table within the same connection.
Example: Deep Inserts¶
For example, consider the AccountCollection and LeadBusinessDocumentReferenceCollection tables. When creating a new Account, you may also want to specify an Account Address. When creating a LeadBusinessDocumentReference, you need to specify an existing document. For each of these, you need to specify the following navigation properties.
Creating Temporary Tables¶
Insert the related entities into temporary tables that correspond to each navigation property. You can specify an existing entity's primary key or you can insert a new entity.
-
Account Address
: The following statement creates two new Account Addresses:INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'New York', '123 Fake Street') INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'San Franscisco', '456 CA Street')
-
Opportunity
: The following statement specifies an existing Opportunity:INSERT INTO OpportunityCollection#TEMP (ObjectID) VALUES ('123')
The connector will assume that the Opportunity already exists and will only link to the existing references since only the primary key was specified. When more than just the primary key is defined, such as the example for Account Address, the Jitterbit Connector for SAP Cloud for Customer will attempt to create new entries - triggering the deep insert.
Inserting the Entity¶
In the INSERT statement for the base entity, reference the temporary tables in the LinkedOpportunity or LinkedAccountAddress columns:
INSERT INTO AccountCollection (AccountID, AccountName, LinkedAccountAddress) VALUES ('123', 'My New Account', 'AccountAddressCollection#TEMP')
INSERT INTO LeadBusinessDocumentReferenceCollection (ParentObjectID, LinkedOpportunity) VALUES ('5555', 'OpportunityCollection#TEMP')
Code Example¶
Below is the complete code to create the new AccountCollection and LeadBusinessDocumentReferenceCollection entities:
Connection conn = DriverManager.getConnection("jdbc:saphybrisc4c:Tenant=mytenant.crm.ondemand.com;User=user;Password=password;");
Statement stat = conn.createStatement();
stat.executeUpdate("INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'New York', '123 Fake Street')");
stat.executeUpdate("INSERT INTO AccountAddressCollection#TEMP (CountryCode, City, Street) VALUES ('USA', 'San Franscisco', '456 CA Street')");
stat.executeUpdate("INSERT INTO AccountCollection (AccountID, AccountName, LinkedAccountAddress) VALUES ('123', 'My New Account', 'AccountAddressCollection#TEMP')");
stat.executeUpdate("INSERT INTO OpportunityCollection#TEMP (ObjectID) VALUES ('123')");
stat.executeUpdate("INSERT INTO LeadBusinessDocumentReferenceCollection (ParentObjectID, LinkedOpportunity) VALUES ('5555', 'OpportunityCollection#TEMP')");
stat.close();
Views¶
Modeling Navigation Properties¶
The connector models Navigation Properties as separate views. The views are named in the format ParentTable_NavigationProperty.
Querying Navigation Properties¶
For an example of working with a navigation property as a view, see AccountCollection_AccountAddress. In SAP Cloud for Customer, the AccountCollection entity set has an AccountAddress navigation property. The Jitterbit Connector for SAP Cloud for Customer will display a view called AccountCollection_AccountAddress. Retrieving data from AccountCollection_AccountAddress will display all of the AccountAddresses associated with a given Account. The AccountCollection_AccountAddress view has a primary key made up of the ID of the parent entity and the ID of the related entity.
Navigation Properties¶
In OData, a navigation property is a property on an entity that is itself either a single entity or list of entities.
A single-entity navigation property signifies a one-to-one relationship; for example, SAP Cloud for Customer has only one Account per AccountTeam. In SAP Cloud for Customer, Account is a navigation property on Account Team.
An entity set navigation property signifies a one-to-many relationship; for example, in SAP Cloud for Customer many AccountTeams can belong in the same Account. In SAP Cloud for Customer, AccountTeam is a navigation property on Accounts, which contain multiple AccountTeams.
Working with Navigation Properties Relationally¶
Navigation properties in OData link related entities. Similarly, in a relational database, a foreign key serves to link tables. While OData can support foreign key references between related entities, SAP Cloud for Customer does not use them. Instead, relationships between entities can only be determined using the navigation properties.
Select¶
Navigation properties will be displayed as views. They can be selected directly from just like any normal table. See Views for more information on querying navigation properties.
Insert¶
The connector supports deep inserts. See Tables for more information on specifying navigation properties when you create an entity.
System Tables¶
You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.
Schema Tables¶
The following tables return database metadata for SAP Cloud for Customer:
- sys_catalogs: Lists the available databases.
- sys_schemas: Lists the available schemas.
- sys_tables: Lists the available tables and views.
- sys_tablecolumns: Describes the columns of the available tables and views.
- sys_procedures: Describes the available stored procedures.
- sys_procedureparameters: Describes stored procedure parameters.
- sys_keycolumns: Describes the primary and foreign keys.
- sys_indexes: Describes the available indexes.
Data Source Tables¶
The following tables return information about how to connect to and query the data source:
- sys_connection_props: Returns information on the available connection properties.
- sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.
Query Information Tables¶
The following table returns query statistics for data modification queries:
- sys_identity: Returns information about batch operations or single updates.
sys_catalogs¶
Lists the available databases.
The following query retrieves all databases determined by the connection string:
SELECT * FROM sys_catalogs
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
sys_schemas¶
Lists the available schemas.
The following query retrieves all available schemas:
SELECT * FROM sys_schemas
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database name. |
SchemaName | String | The schema name. |
sys_tables¶
Lists the available tables.
The following query retrieves the available tables and views:
SELECT * FROM sys_tables
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view. |
TableType | String | The table type (table or view). |
Description | String | A description of the table or view. |
IsUpdateable | Boolean | Whether the table can be updated. |
sys_tablecolumns¶
Describes the columns of the available tables and views.
The following query returns the columns and data types for the AccountCollection table:
SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='AccountCollection'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the table or view. |
SchemaName | String | The schema containing the table or view. |
TableName | String | The name of the table or view containing the column. |
ColumnName | String | The column name. |
DataTypeName | String | The data type name. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The storage size of the column. |
DisplaySize | Int32 | The designated column's normal maximum width in characters. |
NumericPrecision | Int32 | The maximum number of digits in numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The column scale or number of digits to the right of the decimal point. |
IsNullable | Boolean | Whether the column can contain null. |
Description | String | A brief description of the column. |
Ordinal | Int32 | The sequence number of the column. |
IsAutoIncrement | String | Whether the column value is assigned in fixed increments. |
IsGeneratedColumn | String | Whether the column is generated. |
IsHidden | Boolean | Whether the column is hidden. |
IsArray | Boolean | Whether the column is an array. |
IsReadOnly | Boolean | Whether the column is read-only. |
IsKey | Boolean | Indicates whether a field returned from sys_tablecolumns is the primary key of the table. |
sys_procedures¶
Lists the available stored procedures.
The following query retrieves the available stored procedures:
SELECT * FROM sys_procedures
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The database containing the stored procedure. |
SchemaName | String | The schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure. |
Description | String | A description of the stored procedure. |
ProcedureType | String | The type of the procedure, such as PROCEDURE or FUNCTION. |
sys_procedureparameters¶
Describes stored procedure parameters.
The following query returns information about all of the input parameters for the SelectEntries stored procedure:
SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the stored procedure. |
SchemaName | String | The name of the schema containing the stored procedure. |
ProcedureName | String | The name of the stored procedure containing the parameter. |
ColumnName | String | The name of the stored procedure parameter. |
Direction | Int32 | An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters. |
DataTypeName | String | The name of the data type. |
DataType | Int32 | An integer indicating the data type. This value is determined at run time based on the environment. |
Length | Int32 | The number of characters allowed for character data. The number of digits allowed for numeric data. |
NumericPrecision | Int32 | The maximum precision for numeric data. The column length in characters for character and date-time data. |
NumericScale | Int32 | The number of digits to the right of the decimal point in numeric data. |
IsNullable | Boolean | Whether the parameter can contain null. |
IsRequired | Boolean | Whether the parameter is required for execution of the procedure. |
IsArray | Boolean | Whether the parameter is an array. |
Description | String | The description of the parameter. |
Ordinal | Int32 | The index of the parameter. |
sys_keycolumns¶
Describes the primary and foreign keys.
The following query retrieves the primary key for the AccountCollection table:
SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='AccountCollection'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
IsKey | Boolean | Whether the column is a primary key in the table referenced in the TableName field. |
IsForeignKey | Boolean | Whether the column is a foreign key referenced in the TableName field. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
sys_foreignkeys¶
Describes the foreign keys.
The following query retrieves all foreign keys which refer to other tables:
SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
PrimaryKeyName | String | The name of the primary key. |
ForeignKeyName | String | The name of the foreign key. |
ReferencedCatalogName | String | The database containing the primary key. |
ReferencedSchemaName | String | The schema containing the primary key. |
ReferencedTableName | String | The table containing the primary key. |
ReferencedColumnName | String | The column name of the primary key. |
ForeignKeyType | String | Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key. |
sys_primarykeys¶
Describes the primary keys.
The following query retrieves the primary keys from all tables and views:
SELECT * FROM sys_primarykeys
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the key. |
SchemaName | String | The name of the schema containing the key. |
TableName | String | The name of the table containing the key. |
ColumnName | String | The name of the key column. |
KeySeq | String | The sequence number of the primary key. |
KeyName | String | The name of the primary key. |
sys_indexes¶
Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.
The following query retrieves all indexes that are not primary keys:
SELECT * FROM sys_indexes WHERE IsPrimary='false'
Columns¶
Name | Type | Description |
---|---|---|
CatalogName | String | The name of the database containing the index. |
SchemaName | String | The name of the schema containing the index. |
TableName | String | The name of the table containing the index. |
IndexName | String | The index name. |
ColumnName | String | The name of the column associated with the index. |
IsUnique | Boolean | True if the index is unique. False otherwise. |
IsPrimary | Boolean | True if the index is a primary key. False otherwise. |
Type | Int16 | An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3). |
SortOrder | String | The sort order: A for ascending or D for descending. |
OrdinalPosition | Int16 | The sequence number of the column in the index. |
sys_connection_props¶
Returns information on the available connection properties and those set in the connection string.
When querying this table, the config connection string should be used:
jdbc:cdata:saphybrisc4c:config:
This connection string enables you to query this table without a valid connection.
The following query retrieves all connection properties that have been set in the connection string or set through a default value:
SELECT * FROM sys_connection_props WHERE Value <> ''
Columns¶
Name | Type | Description |
---|---|---|
Name | String | The name of the connection property. |
ShortDescription | String | A brief description. |
Type | String | The data type of the connection property. |
Default | String | The default value if one is not explicitly set. |
Values | String | A comma-separated list of possible values. A validation error is thrown if another value is specified. |
Value | String | The value you set or a preconfigured default. |
Required | Boolean | Whether the property is required to connect. |
Category | String | The category of the connection property. |
IsSessionProperty | String | Whether the property is a session property, used to save information about the current connection. |
Sensitivity | String | The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms. |
PropertyName | String | A camel-cased truncated form of the connection property name. |
Ordinal | Int32 | The index of the parameter. |
CatOrdinal | Int32 | The index of the parameter category. |
Hierarchy | String | Shows dependent properties associated that need to be set alongside this one. |
Visible | Boolean | Informs whether the property is visible in the connection UI. |
ETC | String | Various miscellaneous information about the property. |
sys_sqlinfo¶
Describes the SELECT query processing that the connector can offload to the data source.
Discovering the Data Source's SELECT Capabilities¶
Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.
Name | Description | Possible Values |
---|---|---|
AGGREGATE_FUNCTIONS | Supported aggregation functions. | AVG , COUNT , MAX , MIN , SUM , DISTINCT |
COUNT | Whether COUNT function is supported. | YES , NO |
IDENTIFIER_QUOTE_OPEN_CHAR | The opening character used to escape an identifier. | [ |
IDENTIFIER_QUOTE_CLOSE_CHAR | The closing character used to escape an identifier. | ] |
SUPPORTED_OPERATORS | A list of supported SQL operators. | = , > , < , >= , <= , <> , != , LIKE , NOT LIKE , IN , NOT IN , IS NULL , IS NOT NULL , AND , OR |
GROUP_BY | Whether GROUP BY is supported, and, if so, the degree of support. | NO , NO_RELATION , EQUALS_SELECT , SQL_GB_COLLATE |
STRING_FUNCTIONS | Supported string functions. | LENGTH , CHAR , LOCATE , REPLACE , SUBSTRING , RTRIM , LTRIM , RIGHT , LEFT , UCASE , SPACE , SOUNDEX , LCASE , CONCAT , ASCII , REPEAT , OCTET , BIT , POSITION , INSERT , TRIM , UPPER , REGEXP , LOWER , DIFFERENCE , CHARACTER , SUBSTR , STR , REVERSE , PLAN , UUIDTOSTR , TRANSLATE , TRAILING , TO , STUFF , STRTOUUID , STRING , SPLIT , SORTKEY , SIMILAR , REPLICATE , PATINDEX , LPAD , LEN , LEADING , KEY , INSTR , INSERTSTR , HTML , GRAPHICAL , CONVERT , COLLATION , CHARINDEX , BYTE |
NUMERIC_FUNCTIONS | Supported numeric functions. | ABS , ACOS , ASIN , ATAN , ATAN2 , CEILING , COS , COT , EXP , FLOOR , LOG , MOD , SIGN , SIN , SQRT , TAN , PI , RAND , DEGREES , LOG10 , POWER , RADIANS , ROUND , TRUNCATE |
TIMEDATE_FUNCTIONS | Supported date/time functions. | NOW , CURDATE , DAYOFMONTH , DAYOFWEEK , DAYOFYEAR , MONTH , QUARTER , WEEK , YEAR , CURTIME , HOUR , MINUTE , SECOND , TIMESTAMPADD , TIMESTAMPDIFF , DAYNAME , MONTHNAME , CURRENT_DATE , CURRENT_TIME , CURRENT_TIMESTAMP , EXTRACT |
REPLICATION_SKIP_TABLES | Indicates tables skipped during replication. | |
REPLICATION_TIMECHECK_COLUMNS | A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication. | |
IDENTIFIER_PATTERN | String value indicating what string is valid for an identifier. | |
SUPPORT_TRANSACTION | Indicates if the provider supports transactions such as commit and rollback. | YES , NO |
DIALECT | Indicates the SQL dialect to use. | |
KEY_PROPERTIES | Indicates the properties which identify the uniform database. | |
SUPPORTS_MULTIPLE_SCHEMAS | Indicates if multiple schemas may exist for the provider. | YES , NO |
SUPPORTS_MULTIPLE_CATALOGS | Indicates if multiple catalogs may exist for the provider. | YES , NO |
DATASYNCVERSION | The Data Sync version needed to access this driver. | Standard , Starter , Professional , Enterprise |
DATASYNCCATEGORY | The Data Sync category of this driver. | Source , Destination , Cloud Destination |
SUPPORTSENHANCEDSQL | Whether enhanced SQL functionality beyond what is offered by the API is supported. | TRUE , FALSE |
SUPPORTS_BATCH_OPERATIONS | Whether batch operations are supported. | YES , NO |
SQL_CAP | All supported SQL capabilities for this driver. | SELECT , INSERT , DELETE , UPDATE , TRANSACTIONS , ORDERBY , OAUTH , ASSIGNEDID , LIMIT , LIKE , BULKINSERT , COUNT , BULKDELETE , BULKUPDATE , GROUPBY , HAVING , AGGS , OFFSET , REPLICATE , COUNTDISTINCT , JOINS , DROP , CREATE , DISTINCT , INNERJOINS , SUBQUERIES , ALTER , MULTIPLESCHEMAS , GROUPBYNORELATION , OUTERJOINS , UNIONALL , UNION , UPSERT , GETDELETED , CROSSJOINS , GROUPBYCOLLATE , MULTIPLECATS , FULLOUTERJOIN , MERGE , JSONEXTRACT , BULKUPSERT , SUM , SUBQUERIESFULL , MIN , MAX , JOINSFULL , XMLEXTRACT , AVG , MULTISTATEMENTS , FOREIGNKEYS , CASE , LEFTJOINS , COMMAJOINS , WITH , LITERALS , RENAME , NESTEDTABLES , EXECUTE , BATCH , BASIC , INDEX |
PREFERRED_CACHE_OPTIONS | A string value specifies the preferred cacheOptions. | |
ENABLE_EF_ADVANCED_QUERY | Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side. | YES , NO |
PSEUDO_COLUMNS | A string array indicating the available pseudo columns. | |
MERGE_ALWAYS | If the value is true, The Merge Mode is forcibly executed in Data Sync. | TRUE , FALSE |
REPLICATION_MIN_DATE_QUERY | A select query to return the replicate start datetime. | |
REPLICATION_MIN_FUNCTION | Allows a provider to specify the formula name to use for executing a server side min. | |
REPLICATION_START_DATE | Allows a provider to specify a replicate startdate. | |
REPLICATION_MAX_DATE_QUERY | A select query to return the replicate end datetime. | |
REPLICATION_MAX_FUNCTION | Allows a provider to specify the formula name to use for executing a server side max. | |
IGNORE_INTERVALS_ON_INITIAL_REPLICATE | A list of tables which will skip dividing the replicate into chunks on the initial replicate. | |
CHECKCACHE_USE_PARENTID | Indicates whether the CheckCache statement should be done against the parent key column. | TRUE , FALSE |
CREATE_SCHEMA_PROCEDURES | Indicates stored procedures that can be used for generating schema files. |
The following query retrieves the operators that can be used in the WHERE clause:
SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'
Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.
Columns¶
Name | Type | Description |
---|---|---|
NAME | String | A component of SQL syntax, or a capability that can be processed on the server. |
VALUE | String | Detail on the supported SQL or SQL syntax. |
sys_identity¶
Returns information about attempted modifications.
The following query retrieves the Ids of the modified rows in a batch operation:
SELECT * FROM sys_identity
Columns¶
Name | Type | Description |
---|---|---|
Id | String | The database-generated ID returned from a data modification operation. |
Batch | String | An identifier for the batch. 1 for a single operation. |
Operation | String | The result of the operation in the batch: INSERTED, UPDATED, or DELETED. |
Message | String | SUCCESS or an error message if the update in the batch failed. |
Data Type Mapping¶
Data Type Mappings¶
The connector maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.
SAP Cloud for Customer (OData V2) | Schema |
---|---|
Edm.Binary | binary |
Edm.Boolean | bool |
Edm.DateTime | datetime |
Edm.Decimal | decimal |
Edm.Double | double |
Edm.Guid | guid |
Edm.Int32 | int |
Edm.String | string |
Edm.TimeOfDay | time |
Advanced Configurations Properties¶
The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to SAP Cloud for Customer. |
URL | The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata. |
Tenant | The SAP Cloud for Customer tenant a connection should be established to. |
UseCustomService | Indicates if the custom SAP Cloud for Customer OData service should be used. |
User | The SAP Cloud for Customer user account used to authenticate. |
Password | The password used to authenticate the user. |
Property | Description |
---|---|
SSOProperties | Additional properties required to connect to the identity provider in a semicolon-separated list. |
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthSettingsLocation | The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://' . |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
Property | Description |
---|---|
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
Property | Description |
---|---|
MaxRows | Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from SAP Cloud for Customer. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
UseClientSidePaging | Whether or not the ADO.NET Provider for SAP Cloud for Customer should use client side paging. |
UserDefinedViews | A filepath pointing to the JSON configuration file containing your custom views. |
Authentication¶
This section provides a complete list of authentication properties you can configure.
Property | Description |
---|---|
AuthScheme | The type of authentication to use when connecting to SAP Cloud for Customer. |
URL | The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata. |
Tenant | The SAP Cloud for Customer tenant a connection should be established to. |
UseCustomService | Indicates if the custom SAP Cloud for Customer OData service should be used. |
User | The SAP Cloud for Customer user account used to authenticate. |
Password | The password used to authenticate the user. |
AuthScheme¶
The type of authentication to use when connecting to SAP Cloud for Customer.
Possible Values¶
Basic
, AzureAD
Data Type¶
string
Default Value¶
Basic
Remarks¶
- Basic: Set this to perform basic authentication.
- AzureAD: Set this to use AzureAD SSO authentication.
URL¶
The SAP Cloud for Customer URL to connect to. Use this to override the default service of c4codata.
Data Type¶
string
Default Value¶
""
Remarks¶
By default, the Jitterbit Connector for SAP Cloud for Customer connects to https://tenantname.crm.ondemand.com/sap/byd/odata/v1/c4codata/
. This is the most comprehensive endpoint, but may not include some data types that can be found on other services. Setting the URL will override both Tenant and UseCustomService, so they are not required if specifying the URL by itself. You can find a list of available URLs at https://tenantname.crm.ondemand.com/sap/c4c/odata/v1/odataservicecatalog/ODataServiceCollection
. Do not include the /$metadata part of the URL when entering this value - it should go to the service document root directory only. For instance: https://tenantname.crm.ondemand.com/sap/c4c/odata/v1/odataservicecatalog/
Tenant¶
The SAP Cloud for Customer tenant a connection should be established to.
Data Type¶
string
Default Value¶
""
Remarks¶
The SAP Cloud for Customer tenant is part of your subscription. For instance, tenantname.crm.ondemand.com. Please include the full domain name as some tenants may not necessarily be on crm.ondemand.com.
UseCustomService¶
Indicates if the custom SAP Cloud for Customer OData service should be used.
Data Type¶
bool
Default Value¶
false
Remarks¶
The customs SAP Cloud for Customer OData service must be manually configured in SAP Cloud for Customer. It allows integration of custom objects with the default ones. If you are not sure, leave this connection property set to false.
User¶
The SAP Cloud for Customer user account used to authenticate.
Data Type¶
string
Default Value¶
""
Remarks¶
Together with Password, this field is used to authenticate against the SAP Cloud for Customer server.
Password¶
The password used to authenticate the user.
Data Type¶
string
Default Value¶
""
Remarks¶
The User and Password
are together used to authenticate with the server.
SSO¶
This section provides a complete list of SSO properties you can configure.
Property | Description |
---|---|
SSOProperties | Additional properties required to connect to the identity provider in a semicolon-separated list. |
SSOProperties¶
Additional properties required to connect to the identity provider in a semicolon-separated list.
Data Type¶
string
Default Value¶
""
Remarks¶
Additional properties required to connect to the identity provider in a semicolon-separated list. is used in conjunction with the SSOLoginURL.
SSO configuration is discussed further in .
OAuth¶
This section provides a complete list of OAuth properties you can configure.
Property | Description |
---|---|
InitiateOAuth | Set this property to initiate the process to obtain or refresh the OAuth access token when you connect. |
OAuthClientId | The client ID assigned when you register your application with an OAuth authorization server. |
OAuthClientSecret | The client secret assigned when you register your application with an OAuth authorization server. |
OAuthAccessToken | The access token for connecting using OAuth. |
OAuthSettingsLocation | The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://' . |
CallbackURL | The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings. |
OAuthVerifier | The verifier code returned from the OAuth authorization URL. |
OAuthExpiresIn | The lifetime in seconds of the OAuth AccessToken. |
OAuthTokenTimestamp | The Unix epoch timestamp in milliseconds when the current Access Token was created. |
InitiateOAuth¶
Set this property to initiate the process to obtain or refresh the OAuth access token when you connect.
Possible Values¶
OFF
, GETANDREFRESH
, REFRESH
Data Type¶
string
Default Value¶
OFF
Remarks¶
The following options are available:
OFF
: Indicates that the OAuth flow will be handled entirely by the user. An OAuthAccessToken will be required to authenticate.GETANDREFRESH
: Indicates that the entire OAuth Flow will be handled by the connector. If no token currently exists, it will be obtained by prompting the user via the browser. If a token exists, it will be refreshed when applicable.REFRESH
: Indicates that the connector will only handle refreshing the OAuthAccessToken. The user will never be prompted by the connector to authenticate via the browser. The user must handle obtaining the OAuthAccessToken and OAuthRefreshToken initially.
OAuthClientId¶
The client ID assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId
value, sometimes also called a consumer key, and a client secret, the OAuthClientSecret.
OAuthClientSecret¶
The client secret assigned when you register your application with an OAuth authorization server.
Data Type¶
string
Default Value¶
""
Remarks¶
As part of registering an OAuth application, you will receive the OAuthClientId, also called a consumer key. You will also receive a client secret, also called a consumer secret. Set the client secret in the OAuthClientSecret
property.
OAuthAccessToken¶
The access token for connecting using OAuth.
Data Type¶
string
Default Value¶
""
Remarks¶
The OAuthAccessToken
property is used to connect using OAuth. The OAuthAccessToken
is retrieved from the OAuth server as part of the authentication process. It has a server-dependent timeout and can be reused between requests.
The access token is used in place of your user name and password. The access token protects your credentials by keeping them on the server.
OAuthSettingsLocation¶
The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://'
.
Data Type¶
string
Default Value¶
%APPDATA%\SAPHybrisC4C Data Provider\OAuthSettings.txt
Remarks¶
When InitiateOAuth is set to GETANDREFRESH
or REFRESH
, the connector saves OAuth values to avoid requiring the user to manually enter OAuth connection properties and to allow the credentials to be shared across connections or processes.
Instead of specifying a file path, you can use memory storage. Memory locations are specified by using a value starting with 'memory://'
followed by a unique identifier for that set of credentials (for example, memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike file-based storage, where credentials persist across connections, memory storage loads the credentials into static memory, and the credentials are shared between connections using the same identifier for the life of the process. To persist credentials outside the current process, you must manually store the credentials prior to closing the connection. This enables you to set them in the connection when the process is started again. You can retrieve OAuth property values with a query to the sys_connection_props
system table. If there are multiple connections using the same credentials, the properties are read from the previously closed connection.
The default location is "%APPDATA%\SAPHybrisC4C Data Provider\OAuthSettings.txt" with %APPDATA%
set to the user's configuration directory. The default values are
- Windows: "
register://%DSN
" - Unix: "%AppData%..."
- Mac: "%AppData%..."
where DSN is the name of the current DSN used in the open connection.
The following table lists the value of %APPDATA%
by OS:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Mac | ~/Library/Application Support |
Linux | ~/.config |
CallbackURL¶
The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings.
Data Type¶
string
Default Value¶
""
Remarks¶
During the authentication process, the OAuth authorization server redirects the user to this URL. This value must match the callback URL you specify in your app settings.
OAuthVerifier¶
The verifier code returned from the OAuth authorization URL.
Data Type¶
string
Default Value¶
""
Remarks¶
The verifier code returned from the OAuth authorization URL. This can be used on systems where a browser cannot be launched such as headless systems.
Authentication on Headless Machines¶
See to obtain the OAuthVerifier
value.
Set OAuthSettingsLocation along with OAuthVerifier
. When you connect, the connector exchanges the OAuthVerifier
for the OAuth authentication tokens and saves them, encrypted, to the specified location. Set InitiateOAuth to GETANDREFRESH to automate the exchange.
Once the OAuth settings file has been generated, you can remove OAuthVerifier
from the connection properties and connect with OAuthSettingsLocation set.
To automatically refresh the OAuth token values, set OAuthSettingsLocation and additionally set InitiateOAuth to REFRESH.
OAuthExpiresIn¶
The lifetime in seconds of the OAuth AccessToken.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthTokenTimestamp to determine when the AccessToken will expire.
OAuthTokenTimestamp¶
The Unix epoch timestamp in milliseconds when the current Access Token was created.
Data Type¶
string
Default Value¶
""
Remarks¶
Pair with OAuthExpiresIn to determine when the AccessToken will expire.
SSL¶
This section provides a complete list of SSL properties you can configure.
Property | Description |
---|---|
SSLServerCert | The certificate to be accepted from the server when connecting using TLS/SSL. |
SSLServerCert¶
The certificate to be accepted from the server when connecting using TLS/SSL.
Data Type¶
string
Default Value¶
""
Remarks¶
If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.
This property can take the following forms:
Description | Example |
---|---|
A full PEM Certificate (example shortened for brevity) | -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE----- |
A path to a local file containing the certificate | C:\\cert.cer |
The public key (example shortened for brevity) | -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY----- |
The MD5 Thumbprint (hex values can also be either space or colon separated) | ecadbdda5a1529c58a1e9e09828d70e4 |
The SHA1 Thumbprint (hex values can also be either space or colon separated) | 34a929226ae0819f2ec14b4a3d904f801cbb150d |
If not specified, any certificate trusted by the machine is accepted.
Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).
Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.
Schema¶
This section provides a complete list of schema properties you can configure.
Property | Description |
---|---|
Location | A path to the directory that contains the schema files defining tables, views, and stored procedures. |
BrowsableSchemas | This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC. |
Tables | This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC. |
Views | Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC. |
Location¶
A path to the directory that contains the schema files defining tables, views, and stored procedures.
Data Type¶
string
Default Value¶
%APPDATA%\SAPHybrisC4C Data Provider\Schema
Remarks¶
The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location
property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.
If left unspecified, the default location is "%APPDATA%\SAPHybrisC4C Data Provider\Schema" with %APPDATA%
being set to the user's configuration directory:
Platform | %APPDATA% |
---|---|
Windows | The value of the APPDATA environment variable |
Mac | ~/Library/Application Support |
Linux | ~/.config |
BrowsableSchemas¶
This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.
Tables¶
This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
Views¶
Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.
Data Type¶
string
Default Value¶
""
Remarks¶
Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.
This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.
Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.
Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.
Miscellaneous¶
This section provides a complete list of miscellaneous properties you can configure.
Property | Description |
---|---|
MaxRows | Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses. |
Other | These hidden properties are used only in specific use cases. |
Pagesize | The maximum number of results to return per page from SAP Cloud for Customer. |
PseudoColumns | This property indicates whether or not to include pseudo columns as columns to the table. |
Timeout | The value in seconds until the timeout error is thrown, canceling the operation. |
UseClientSidePaging | Whether or not the ADO.NET Provider for SAP Cloud for Customer should use client side paging. |
UserDefinedViews | A filepath pointing to the JSON configuration file containing your custom views. |
MaxRows¶
Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Data Type¶
int
Default Value¶
-1
Remarks¶
Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other¶
These hidden properties are used only in specific use cases.
Data Type¶
string
Default Value¶
""
Remarks¶
The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.
Specify multiple properties in a semicolon-separated list.
Integration and Formatting¶
Property | Description |
---|---|
DefaultColumnSize | Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000. |
ConvertDateTimeToGMT | Determines whether to convert date-time values to GMT, instead of the local time of the machine. |
RecordToFile=filename | Records the underlying socket data transfer to the specified file. |
Pagesize¶
The maximum number of results to return per page from SAP Cloud for Customer.
Data Type¶
int
Default Value¶
5000
Remarks¶
The Pagesize
property affects the maximum number of results to return per page from SAP Cloud for Customer. Setting a higher value may result in better performance at the cost of additional memory allocated per page consumed.
PseudoColumns¶
This property indicates whether or not to include pseudo columns as columns to the table.
Data Type¶
string
Default Value¶
""
Remarks¶
This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".
Timeout¶
The value in seconds until the timeout error is thrown, canceling the operation.
Data Type¶
int
Default Value¶
60
Remarks¶
If Timeout
= 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.
If Timeout
expires and the operation is not yet complete, the connector throws an exception.
UseClientSidePaging¶
Whether or not the ADO.NET Provider for SAP Cloud for Customer should use client side paging.
Data Type¶
bool
Default Value¶
true
Remarks¶
Some sources do not support server side paging. In these cases, set UseClientSidePaging to true. Otherwise, leave it as false. Setting UseClientSidePaging to true on a source that already supports paging can cause incomplete results.
UserDefinedViews¶
A filepath pointing to the JSON configuration file containing your custom views.
Data Type¶
string
Default Value¶
""
Remarks¶
User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json
. The connector automatically detects the views specified in this file.
You can also have multiple view definitions and control them using the UserDefinedViews
connection property. When you use this property, only the specified views are seen by the connector.
This User Defined View configuration file is formatted as follows:
- Each root element defines the name of a view.
- Each root element contains a child element, called
query
, which contains the custom SQL query for the view.
For example:
{
"MyView": {
"query": "SELECT * FROM AccountCollection WHERE MyColumn = 'value'"
},
"MyView2": {
"query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
}
}
Use the UserDefinedViews
connection property to specify the location of your JSON configuration file. For example:
"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json
Note that the specified path is not embedded in quotation marks.