Amazon Marketplace v2 Connection Details

Introduction

Connector Version

This documentation is based on version 24.0.9273 of the connector.

Get Started

Amazon Marketplace Version Support

The connector leverages the Amazon Marketplace API to enable bidirectional access to the Amazon Selling Partner (SP) API.

Establish a Connection

Connect to Amazon Marketplace

The following properties are required:

• Schema: Set this to SellerCentral.
• InitiateOAuth: Set this to GETANDREFRESH.
• Marketplace: Set this to the Marketplace region that you are registered to sell in.

Authenticate to Amazon Marketplace

OAuth

Amazon Marketplace uses the OAuth authentication standard.

To authenticate using OAuth, you must either use the embedded application or create a new custom OAuth app. The embedded application supports desktop applications and headless machines. Web applications require that you create a custom OAuth application.

You can use a custom OAuth application to authenticate with a service account or a user account. See Creating a Custom OAuth App for more information.

Downloading Embedded Credentials

Because Amazon Marketplace requires that embedded credentials rotate every six months, credentials are hosted on oa.cdata.com. If you do not specify custom credentials, the embedded credentials are downloaded from our web service and saved in the location specified in OAuthClientLocation by default.

Desktop Apps

You can use the embedded application or create a custom OAuth application. The key difference is that you must set additional connection properties if you use a custom application.

Get and Refresh the OAuth Access Token

After setting the following, you are ready to connect:

• InitiateOAuth: Set this to GETANDREFRESH. You can use InitiateOAuth to avoid repeating the OAuth exchange and manually setting the OAuthAccessToken.
• Marketplace: Set this to the Marketplace region that you are registered to sell in.
• AppId: Set this to the application ID for the Selling Partner application you created.
• Schema: Set this to SellerCentral to connect to Seller Central API.
• AWSAccessKey: This is the Access Key tied to the AWS user that is associated with the OAuthClientId.
• AWSSecretKey: This is the Secret Key tied to the AWS user that is associated with the OAuthClientId.
• OAuthClientId (custom applications only): Set this to the client ID assigned when you registered your app.
• OAuthClientSecret (custom applications only): Set this to the client secret assigned when you registered your app.

When you connect the connector opens the OAuth endpoint in your default browser. Log in and grant permissions to the application. The connector then completes the OAuth process:

1. Extracts the access token from the callback URL and authenticates requests.
2. Refreshes the access token when it expires.
3. Saves OAuth values in OAuthSettingsLocation. These values persist across connections.

Amazon Marketplace Data Retention Policy

For security, Amazon Marketplace restricts access to PII (Personally Identifiable Information). You can only retain PII for 30 days after order delivery and only for the purpose of, and as long as is necessary to

• fulfill orders
• calculate and remit taxes
• produce tax invoices
• meet legal requirements, including tax or regulatory requirements.

If you are required by law to retain archival copies of PII for tax or other regulatory purposes, you must store PII as a "cold" or offline encrypted backup (e.g., not available for immediate or interactive use).

This means, for example, that the Amazon Marketplace driver no longer displays customer shipping address information after 30 days. See the Amazon documentation for more information:

Amazon Marketplace Data Protection Policy

Create a Custom OAuth App

You can use a custom OAuth app to authenticate a service account or a user account.

Create an OAuth App for User Account Authentication

Follow the procedure below to register an app and obtain the OAuthClientId and OAuthClientSecret.

Create a Custom OAuth App

1. Log into the Selling Partner Console and open Develop Apps from Apps & Services.

2. Click Add new app client.

3. Provide name for the app and select SP-API as the API type.

4. Provide IAM ARN for the AWS account and Select Sellers.

5. Provide OAuth Login URI and OAuth Redirect URI values. After creating the app, the OAuthClientId and OAuthClientSecret are displayed under LWA credentials.

For a more in depth reading of how to create a custom OAuth app and configure the IAM role, please see the Amazon Selling Partner Guide.

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Amazon Marketplace connector.

User Defined Views

The connector supports the use of user defined views, virtual tables whose contents are decided by a pre-configured user defined query. These views are useful when you cannot directly control queries being issued to the drivers. For an overview of creating and configuring custom views, see User Defined Views .

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats;. For further information, see the SSLServerCert property under "Connection String Options" .

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

Query Processing

The connector offloads as much of the SELECT statement processing as possible to Amazon Marketplace and then processes the rest of the query in memory (client-side).

For further information, see Query Processing.

Log

For an overview of configuration settings that can be used to refine logging, see Logging. Only two connection properties are required for basic logging, but there are numerous features that support more refined logging, which enables you to use the LogModules connection property to specify subsets of information to be logged.

User Defined Views

The Jitterbit Connector for Amazon Marketplace supports the use of user defined views: user-defined virtual tables whose contents are decided by a preconfigured query. User defined views are useful in situations where you cannot directly control the query being issued to the driver; for example, when using the driver from Jitterbit.

Use a user defined view to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

• Create a JSON-formatted configuration file defining the views you want.
• DDL statements.

Define Views Using a Configuration File

User defined views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This user defined view configuration file is formatted so that each root element defines the name of a view, and includes a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM Orders WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Define Views Using DDL Statements

The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.

Create a View

To create a new view using DDL statements, provide the view name and query as follows:

CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;

If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews connection property.

Alter a View

To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:

ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';

The view is then updated in the JSON configuration file.

Drop a View

To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.

DROP LOCAL VIEW [MyViewName]

This removes the view from the JSON configuration file. It can no longer be queried.

Schema for User Defined Views

In order to avoid a view's name clashing with an actual entity in the data model, user defined views are exposed in the UserViews schema by default. To change the name of the schema used for UserViews, reset the UserViewsSchemaName property.

Work with User Defined Views

For example, a SQL statement with a user defined view called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a user defined view that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate TLS with the server. The server certificate is validated against the default system trusted certificate store. You can override how the certificate gets validated using the SSLServerCert connection property.

To specify another certificate, see the SSLServerCert connection property.

Data Model

The Jitterbit Connector for Amazon Marketplace models Amazon Marketplace objects as relational tables and views. An Amazon Marketplace object has relationships to other objects; in the tables, these relationships are expressed through foreign keys. The following sections show the available API objects and provide more information on executing SQL to Amazon Marketplace APIs.

Schemas for most database objects are defined in simple, text-based configuration files.

Using SellerCentral API

See Seller Central Data Model for the available entities in the Seller Central API.

Using VendorCentral API

See Vendor Central Data Model for the available entities in the Vendor Central API.

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Amazon Marketplace:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Orders table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Orders'

Columns

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SampleProcedure stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName = 'SampleProcedure' AND Direction = 1 OR Direction = 2

Columns

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the Orders table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Orders'

Columns

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys

Columns

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

OAuth

SSL

Schema

Miscellaneous

Authentication

This section provides a complete list of authentication properties you can configure.

Schema

The type of schema to use.

Possible Values

SellerCentral, VendorCentral

Data Type

string

Default Value

SellerCentral

Remarks

The available schemas are SellerCentral and VendorCentral.

AWSRegion

The hosting region for your Amazon Web Services.

Possible Values

OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, HYDERABAD, JAKARTA, MALAYSIA, MELBOURNE, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, THAILAND, TOKYO, CENTRAL, CALGARY, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, SPAIN, STOCKHOLM, ZURICH, TELAVIV, MEXICOCENTRAL, BAHRAIN, UAE, SAOPAULO, GOVCLOUDEAST, GOVCLOUDWEST, ISOLATEDUSEAST, ISOLATEDUSEASTB, ISOLATEDUSEASTF, ISOLATEDUSSOUTHF, ISOLATEDUSWEST, ISOLATEDEUWEST

Data Type

string

Default Value

NORTHERNVIRGINIA

Remarks

The hosting region for your Amazon Web Services. Available values are OHIO, NORTHERNVIRGINIA, NORTHERNCALIFORNIA, OREGON, CAPETOWN, HONGKONG, HYDERABAD, JAKARTA, MALAYSIA, MELBOURNE, MUMBAI, OSAKA, SEOUL, SINGAPORE, SYDNEY, THAILAND, TOKYO, CENTRAL, CALGARY, BEIJING, NINGXIA, FRANKFURT, IRELAND, LONDON, MILAN, PARIS, SPAIN, STOCKHOLM, ZURICH, TELAVIV, MEXICOCENTRAL, BAHRAIN, UAE, SAOPAULO, GOVCLOUDEAST, GOVCLOUDWEST, ISOLATEDUSEAST, ISOLATEDUSEASTB, ISOLATEDUSEASTF, ISOLATEDUSSOUTHF, ISOLATEDUSWEST, and ISOLATEDEUWEST.

Marketplace

The Marketplace region that you are registered to sell in.

Possible Values

Australia, Belgium, Brazil, Canada, Egypt, France, Germany, India, Ireland, Italy, Japan, Mexico, Netherlands, Poland, Saudi Arabia, Singapore, Spain, Sweden, Turkey, United Arab Emirates, United Kingdom, United States

Data Type

string

Default Value

United States

Remarks

Available regions for are Australia, Belgium, Brazil, Canada, Egypt, France, Germany, India, Ireland, Italy, Japan, Mexico, Netherlands, Poland, Saudi Arabia, Singapore, Spain, Sweden, Turkey, United Arab Emirates, United Kingdom, United States.

SellerId

The Seller ID or merchant identifier you received when creating the account.

Data Type

string

Default Value

""

Remarks

The Seller ID or merchant identifier you received when creating the account.

AWSRoleARN

The Amazon Resource Name of the role to use when authenticating.

Data Type

string

Default Value

""

Remarks

When authenticating outside of AWS, it is common to use a Role for authentication instead of your direct AWS account credentials. Entering the AWSRoleARN will cause the Jitterbit Connector for Amazon Marketplace to perform a role based authentication instead of using the AWSAccessKey and AWSSecretKey directly. The AWSAccessKey and AWSSecretKey must still be specified to perform this authentication. You cannot use the credentials of an AWS root user when setting RoleARN. The AWSAccessKey and AWSSecretKey must be those of an IAM user.

AppId

Application ID for Selling Partner app you created.

Data Type

string

Default Value

""

Remarks

Application ID for Selling Partner app you created.

AWSSessionToken

AWS Session Token for Selling Partner app you created.

Data Type

string

Default Value

""

Remarks

AWS Session Token can be obtained from AssumeRole request to AWS. AWSAccessKey and AWSSecretKey should also be provided when setting AWSSessionToken.

AWSAccessKey

Your AWS access key.

Data Type

string

Default Value

""

Remarks

This is the Access Key tied to the AWS user that is associated with the the OAuthClientId.

AWSSecretKey

Your AWS secret key.

Data Type

string

Default Value

""

Remarks

This is the Secret Key tied to the AWS user that is associated with the the OAuthClientId.

IncludeRestrictedData

Determines if Restricted Data Tokens (RDT) should be used to retrieve Personally Identifiable Information (PII).

Data Type

bool

Default Value

false

Remarks

Determines if Restricted Data Tokens (RDT) should be used to retrieve Personally Identifiable Information (PII).

UseSandbox

A boolean determining if the connection should be made to the Selling Partner sandbox account.

Data Type

bool

Default Value

false

Remarks

A boolean determining if the connection should be made to the Selling Partner sandbox account.

OAuth

This section provides a complete list of OAuth properties you can configure.

InitiateOAuth

Specifies the process for obtaining or refreshing the OAuth access token, which maintains user access while an authenticated, authorized user is working.

Possible Values

OFF, REFRESH, GETANDREFRESH

Data Type

string

Default Value

OFF

Remarks

OAuth is an authorization framework that enables applications to obtain limited access to user accounts on an HTTP service. The OAuth flow defines the method to be used for logging in users, exchanging their credentials for an OAuth access token to be used for authentication, and providing limited access to applications.

Amazon Marketplace supports the following options for initiating OAuth access:

1. OFF: No automatic OAuth flow initiation. The OAuth flow is handled entirely by the user, who will take action to obtain their OAuthAccessToken. Note that with this setting the user must refresh the token manually and reconnect with an updated OAuthAccessToken property when the current token expires.
2. GETANDREFRESH: The OAuth flow is handled entirely by the connector. If a token already exists, it is refreshed when necessary. If no token currently exists, it will be obtained by prompting the user to login.
3. REFRESH: The user handles obtaining the OAuth Access Token and sets up the sequence for refreshing the OAuth Access Token. (The user is never prompted to log in to authenticate. After the user logs in, the connector handles the refresh of the OAuth Access Token.

OAuthClientId

Specifies the client ID that was assigned the custom OAuth application was created. (Also known as the consumer key.) This ID registers the custom application with the OAuth authorization server.

Data Type

string

Default Value

""

Remarks

OAuthClientId is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

OAuthClientSecret

Specifies the client secret that was assigned when the custom OAuth application was created. (Also known as the consumer secret ). This secret registers the custom application with the OAuth authorization server.

Data Type

string

Default Value

""

Remarks

OAuthClientSecret is one of a handful of connection parameters that need to be set before users can authenticate via OAuth. For details, see Establishing a Connection.

OAuthAccessToken

A token received after authentication to the OAuth network, granting the user access. The access token is used in place of the user's login ID and password, which stay on the server.

Data Type

string

Default Value

""

Remarks

The OAuth access token has a server-dependent timeout, limiting user access. This is set using the OAuthExpiresIn property. However, it can be reissued between requests to keep access alive as long as the user keeps working.

If InitiateOAuth is set to REFRESH, we recommend that you also set both OAuthExpiresIn and OAuthTokenTimestamp. The connector uses these properties to determine when the token expires so it can refresh most efficiently.

If OAuthExpiresIn and OAuthTokenTimestamp are not specified, the connector refreshes the token immediately.

OAuthSettingsLocation

The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH. Alternatively, you can hold this location in memory by specifying a value starting with 'memory://'.

Data Type

string

Default Value

%APPDATA%\\CData\\Acumatica Data Provider\\OAuthSettings.txt

Remarks

When InitiateOAuth is set to GETANDREFRESH or REFRESH, the driver saves OAuth values to avoid requiring the user to manually enter OAuth connection properties and to allow the credentials to be shared across connections or processes.

Instead of specifying a file path, you can use memory storage. Memory locations are specified by using a value starting with 'memory://' followed by a unique identifier for that set of credentials (for example, memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike file-based storage, where credentials persist across connections, memory storage loads the credentials into static memory, and the credentials are shared between connections using the same identifier for the life of the process. To persist credentials outside the current process, you must manually store the credentials prior to closing the connection. This enables you to set them in the connection when the process is started again. You can retrieve OAuth property values with a query to the sys_connection_props system table. If there are multiple connections using the same credentials, the properties are read from the previously closed connection.

The default location is "%APPDATA%\\CData\\Acumatica Data Provider\\OAuthSettings.txt" with %APPDATA% set to the user's configuration directory. The default values are

• Windows: "register://%DSN"
• Unix: "%AppData%..."

where DSN is the name of the current DSN used in the open connection.

The following table lists the value of %APPDATA% by OS:

OAuthClientLocation

The location of the settings file where the embedded application's OAuth credentials are saved. Alternatively, this can be held in memory by specifying a value starting with memory://.

Data Type

string

Default Value

%APPDATA%\AmazonMarketplace Data Provider\OAuthClient.txt

Remarks

The connector retrieves and saves the embedded application's OAuth credentials on a fixed interval because of API requirements.

Alternatively to specifying a file path, memory storage can be used instead. Memory locations are specified by using a value starting with 'memory://' followed by a unique identifier for that set of credentials (ex: memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike with the file based storage, you must manually store the credentials when closing the connection with memory storage to be able to set them in the connection when the process is started again. The OAuth property values can be retrieved with a query to the sys_connection_props system table. If there are multiple connections using the same credentials, the properties should be read from the last connection to be closed.

If left unspecified, the default location is "%APPDATA%\AmazonMarketplace Data Provider\OAuthClient.txt" with %APPDATA% being set to the user's configuration directory:

CallbackURL

The URL users return to after authenticating to Amazon Marketplace via OAuth.

Data Type

string

Default Value

""

Remarks

During the authentication process, the OAuth authorization server redirects the user to this URL. This value must match the callback URL you specified when you created your custom OAuth application.

OAuthAppStatus

Specifies whether the specified SellingPartner OAuth App is in Draft status or Published Status.

Possible Values

Published, Draft

Data Type

string

Default Value

Published

Remarks

Specifies whether the specified SellingPartner OAuth App is in Draft status or Published Status.

If you set this property to 'Draft', the version=beta parameter is added to OAuth authorization URI, and the workflow authorizes an application in Draft state. Otherwise, the workflow authorizes an application published on the Amazon Seller Central Partner Network.

OAuthVerifier

Specifies a verifier code returned from the OAuthAuthorizationURL . Used when authenticating to OAuth on a headless server, where a browser can't be launched. Requires both OAuthSettingsLocation and OAuthVerifier to be set.

Data Type

string

Default Value

""

Remarks

For detailed instructions about how to obtain the OAuthVerifier value, see .

OAuthRefreshToken

Gets and refreshes the currently-active OAuth Access Token.

Data Type

string

Default Value

""

Remarks

When InitiateOAuth is set to REFRESH, the first time the token expires the connector uses the OAuthRefreshToken to get a new access and refresh tokens from the server. After the first refresh, the connector uses the access and refresh tokens stored in OAuthSettingsLocation instead of the tokens from the connection properties. The access token is used in place of the user's login ID and password, which stay on the server.

The OAuth access token has a server-dependent timeout, limiting user access, set using the OAuthExpiresIn property. When OAuthRefreshToken is called, it refreshes the OAuth access token so the user can keep working without needing to re-authenticate.

OAuthExpiresIn

Specifies the duration in seconds, of an OAuth Access Token's lifetime. The token can be reissued to keep access alive as long as the user keeps working.

Data Type

string

Default Value

""

Remarks

The OAuth Access Token is assigned to an authenticated user, granting that user access to the network for a specified period of time. The access token is used in place of the user's login ID and password, which stay on the server.

An access token created by the server is only valid for a limited time. OAuthExpiresIn is the number of seconds the token is valid from when it was created. For example, a token generated at 2024-01-29 20:00:00 UTC that expires at 2024-01-29 21:00:00 UTC (an hour later) would have an OAuthExpiresIn value of 3600, no matter what the current time is.

To determine how long the user has before the Access Token will expire, use OAuthTokenTimestamp.

OAuthTokenTimestamp

Displays a Unix epoch timestamp in milliseconds that shows how long ago the current Access Token was created.

Data Type

string

Default Value

""

Remarks

The OAuth Access Token is assigned to an authenticated user, granting that user access to the network for a specified period of time. The access token is used in place of the user's login ID and password, which stay on the server.

An access token created by the server is only valid for a limited time. OAuthTokenTimestamp is the Unix timestamp when the server created the token. For example, OAuthTokenTimestamp=1706558400 indicates the OAuthAccessToken was generated by the server at 2024-01-29 20:00:00 UTC.

SSL

This section provides a complete list of SSL properties you can configure.

SSLServerCert

Specifies the certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Location

Specifies the location of a directory containing schema files that define tables, views, and stored procedures. Depending on your service's requirements, this may be expressed as either an absolute path or a relative path.

Data Type

string

Default Value

%APPDATA%\AmazonMarketplace Data Provider\Schema

Remarks

The Location property is only needed if you want to either customize definitions (for example, change a column name, ignore a column, etc.) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is %APPDATA%\AmazonMarketplace Data Provider\Schema, where %APPDATA% is set to the user's configuration directory:

BrowsableSchemas

Optional setting that restricts the schemas reported to a subset of all available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC .

Data Type

string

Default Value

""

Remarks

Listing all available database schemas can take extra time, thus degrading performance. Providing a list of schemas in the connection string saves time and improves performance.

Tables

Optional setting that restricts the tables reported to a subset of all available tables. For example, Tables=TableA,TableB,TableC .

Data Type

string

Default Value

""

Remarks

Listing all available tables from some databases can take extra time, thus degrading performance. Providing a list of tables in the connection string saves time and improves performance.

If there are lots of tables available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those tables. To do this, specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Views

Optional setting that restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC .

Data Type

string

Default Value

""

Remarks

Listing all available views from some databases can take extra time, thus degrading performance. Providing a list of views in the connection string saves time and improves performance.

If there are lots of views available and you already know which ones you want to work with, you can use this property to restrict your viewing to only those views. To do this, specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

IncludeReports

Set this connection property to true to expose already created reports as views, this property is avaible for both schemas (SellerCentral and VendorCentral).

Data Type

bool

Default Value

false

Remarks

Set this connection property to true to expose already created reports as views, this property is avaible for both schemas (SellerCentral and VendorCentral).

MaxRows

Specifies the maximum rows returned for queries without aggregation or GROUP BY.

Data Type

int

Default Value

-1

Remarks

This property sets an upper limit on the number of rows the connector returns for queries that do not include aggregation or GROUP BY clauses. This limit ensures that queries do not return excessively large result sets by default.

When a query includes a LIMIT clause, the value specified in the query takes precedence over the MaxRows setting. If MaxRows is set to "-1", no row limit is enforced unless a LIMIT clause is explicitly included in the query.

This property is useful for optimizing performance and preventing excessive resource consumption when executing queries that could otherwise return very large datasets.

Other

Specifies additional hidden properties for specific use cases. These are not required for typical provider functionality. Use a semicolon-separated list to define multiple properties.

Data Type

string

Default Value

""

Remarks

This property allows advanced users to configure hidden properties for specialized scenarios. These settings are not required for normal use cases but can address unique requirements or provide additional functionality. Multiple properties can be defined in a semicolon-separated list.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

ProcedurePooling

Whether or not to get feed results after an execution of a stored procedure.

Data Type

bool

Default Value

true

Remarks

Set this to False if you do not want to wait to get the results of a stored procedure.

PseudoColumns

Specifies the pseudocolumns to expose as table columns. Use the format 'TableName=ColumnName;TableName=ColumnName'. The default is an empty string, which disables this property.

Data Type

string

Default Value

""

Remarks

This property allows you to define which pseudocolumns the connector exposes as table columns.

To specify individual pseudocolumns, use the following format: "Table1=Column1;Table1=Column2;Table2=Column3"

To include all pseudocolumns for all tables use: "*=*"

ReportTypes

Set this connection property to one or more report types to filter reports.

Data Type

string

Default Value

""

Remarks

Set this connection property to one or more comma-separated report types to filter reports. This property decides which report types to expose as views when IncludeReports = True and Schema = SellerCentral.

RowScanDepth

The maximum number of rows to scan to look for the columns datatype in a report.

Data Type

int

Default Value

100

Remarks

The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

Timeout

Specifies the maximum time, in seconds, that the provider waits for a server response before throwing a timeout error. The default is 60 seconds. Set to 0 to disable the timeout.

Data Type

int

Default Value

60

Remarks

This property controls the maximum time, in seconds, that the connector waits for an operation to complete before canceling it. If the timeout period expires before the operation finishes, the connector cancels the operation and throws an exception.

The timeout applies to each individual communication with the server rather than the entire query or operation. For example, a query could continue running beyond 60 seconds if each paging call completes within the timeout limit.

Setting this property to 0 disables the timeout, allowing operations to run indefinitely until they succeed or fail due to other conditions such as server-side timeouts, network interruptions, or resource limits on the server. Use this property cautiously to avoid long-running operations that could degrade performance or result in unresponsive behavior.

TypeDetectionScheme

Specifies how to determine the data types of columns when selecting from Reports.

Possible Values

None, RowScan

Data Type

string

Default Value

RowScan

Remarks

When IncludeReports is set to True, this property specifies how to determine the data types.

UserDefinedViews

Specifies a filepath to a JSON configuration file defining custom views. The provider automatically detects and uses the views specified in this file.

Data Type

string

Default Value

""

Remarks

This property allows you to define and manage custom views through a JSON-formatted configuration file called UserDefinedViews.json. These views are automatically recognized by the connector and enable you to execute custom SQL queries as if they were standard database views. The JSON file defines each view as a root element with a child element called "query", which contains the SQL query for the view. For example:

{
    "MyView": {
        "query": "SELECT * FROM Orders WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }

}

You can define multiple views in a single file and specify the filepath using this property. For example: UserDefinedViews=C:\Path\To\UserDefinedViews.json. When you use this property, only the specified views are seen by the connector.

Refer to User Defined Views for more information.

UseSimpleNames

Boolean determining if simple names should be used for tables and columns.

Data Type

bool

Default Value

false

Remarks

Amazon Marketplace tables and columns can use special characters in names that are normally not allowed in standard databases. UseSimpleNames makes the connector easier to use with traditional database tools.

Setting UseSimpleNames to true will simplify the names of tables and columns returned. It will enforce a naming scheme such that only alphanumeric characters and the underscore are valid for the displayed table and column names. Any nonalphanumeric characters will be converted to an underscore. Additionally, if the column or table names exceed 128 characters, they will be truncated to this length to comply with SQL Server standards.