Zoho Creator Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.9039 of the connector.

Get Started

Zoho Creator Version Support

The connector leverages V2 of the Zoho Creator API to enable bidirectional access to Zoho Creator.

Establish a Connection

Connect to Zoho Creator

Zoho Creator provides two ways to connect to data:

• To connect to your own local data via the desktop (non-browser connection), use the -supplied embedded OAuth application.
• To connect to shared data over the network (browser connection), use a custom OAuth application.

To enable this authentication from all OAuth flows (embedded or custom), you must set AuthScheme to OAuth.

The following subsections describe how to authenticate to Zoho Creator from three common authentication flows:

• Desktop: a connection to a server on the user's local machine, frequently used for testing and prototyping. Authenticated via either embedded OAuth or custom OAuth.
• Web: access to data via a shared website. Authenticated via custom OAuth only.
• Headless Server: a dedicated computer that provides services to other computers and their users, which is configured to operate without a monitor and keyboard. Authenticated via embedded OAuth or custom OAuth.

For information about how to create a custom OAuth application, and why you might want to create one even for auth flows that have embedded OAuth credentials, see Creating a Custom OAuth Application.

For a complete list of connection string properties available in Zoho Creator, see Connection.

Desktop Applications

provides an embedded OAuth application that simplifies authentication at the desktop.

You can also authenticate from the desktop via a custom OAuth application, which you configure and register at the Zoho Creator console. For further information, see Creating a Custom OAuth Application.

Before you connect, set the following variables:

• InitiateOAuth: GETANDREFRESH. Used to automatically get and refresh the OAuthAccessToken.
• Custom OAuth applications only:
  • OAuthClientId: The client ID assigned when you registered your custom OAuth application.
  • OAuthClientSecret: The client secret assigned when you registered your custom OAuth application.
  • CallbackURL: The redirect URI defined when you registered your custom OAuth application.

When you connect, the connector opens Zoho Creator's OAuth endpoint in your default browser. Log in and grant permissions to the application.

After you grant permissions to the application, the connector completes the OAuth process:

1. The connector obtains an access token from Zoho Creator and uses it to request data.
2. The OAuth values are saved in the path specified in OAuthSettingsLocation. These values persist across connections.

When the access token expires, the connector refreshes it automatically.

Automatic refresh of the OAuth access token:

To have the connector automatically refresh the OAuth access token, do the following:

1. The first time you connect to data, set the following connection parameters:
   • InitiateOAuth: REFRESH.
   • OAuthClientId: The client ID in your application settings.
   • OAuthClientSecret: The client secret in your application settings.
   • OAuthAccessToken: The access token returned by GetOAuthAccessToken.
   • OAuthSettingsLocation: The path where you want the connector to save the OAuth values, which persist across connections.
2. On subsequent data connections, set the following:
   • InitiateOAuth
   • OAuthSettingsLocation

Manual refresh of the OAuth access token:

The only value needed to manually refresh the OAUth access token is the OAuth refresh token.

1. To manually refresh the OAuthAccessToken after the ExpiresIn period (returned by GetOAuthAccessToken) has elapsed, call the RefreshOAuthAccessToken stored procedure.
2. Set the following connection properties:
   • OAuthClientId: The Client ID in your application settings.
   • OAuthClientSecret: The Client Secret in your application settings.
3. Call RefreshOAuthAccessToken with OAuthRefreshToken set to the OAuth refresh token returned by GetOAuthAccessToken.
4. After the new tokens have been retrieved, set the OAuthAccessToken property to the value returned by RefreshOAuthAccessToken. This opens a new connection.

Store the OAuth refresh token so that you can use it to manually refresh the OAuth access token after it has expired.

Create a Custom OAuth Application

Create a Custom OAuth Application

embeds OAuth Application Credentials with branding that can be used when connecting to Zoho Creator via a desktop application or a headless machine. If you want to use the embedded OAuth application, all you need to do to connect is to:

• set AuthScheme to OAuth,
• get and set the OAuthAccessToken, and
• set the necessary configuration parameters.

(For information on getting and setting the OAuthAccessToken and other configuration parameters, see the Desktop Authentication section of "Connecting to Zoho Creator".)

However, you must create a custom OAuth application to connect to Zoho Creator via the Web. And since custom OAuth applications seamlessly support all three commonly-used auth flows, you might want to create custom OAuth applications (use your own OAuth Application Credentials) for those auth flows anyway.

Custom OAuth applications are useful if you want to:

• control branding of the authentication dialog;
• control the redirect URI that the application redirects the user to after the user authenticates; or
• customize the permissions that you are requesting from the user.

Procedure

To create a custom OAuth application and also obtain the OAuthClientId,

OAuthClientSecret, and CallbackURL:

1. Navigate to accounts.zoho.com/developerconsole.
2. Click Add Client, then Server-Based Application.
3. Enter the client name, homepage URL, and redirect URL.

4. If the user will connect via either desktop or Web, set a callback URL

   • For desktop applications, set the callback URL to http://localhost:33333, or another port number of your choice.

   • For Web applications, set a callback URL to specify what page the user should land on after granting your application

     access. 5. Click Create.

Fine-Tuning Data Access

Fine Tuning Data Access

You can use the following properties to gain more control over the data returned from Zoho Creator:

• AccountsServer: The full Account Server URL. Most of the time, the value of this property will be https://creatorapp.zoho.com, but if your account resides in a different location, then the domain should change accordingly (.eu, .in, .com.au, ...).

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Zoho Creator connector.

User Defined Views

The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

Query Processing

The connector offloads as much of the SELECT statement processing as possible to Zoho Creator and then processes the rest of the query in memory (client-side).

See Query Processing for more information.

User Defined Views

The Zoho Creator connector allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

• Create a JSON-formatted configuration file defining the views you want.
• DDL statements.

Define Views Using a Configuration File

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM [].[Employee Management].Leave_Types WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Define Views Using DDL Statements

The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.

Create a View

To create a new view using DDL statements, provide the view name and query as follows:

CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;

If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews connection property.

Alter a View

To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:

ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';

The view is then updated in the JSON configuration file.

Drop a View

To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.

DROP LOCAL VIEW [MyViewName]

This removes the view from the JSON configuration file. It can no longer be queried.

Schema for User Defined Views

User Defined Views are exposed in the UserViews schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName property.

Work with User Defined Views

For example, a SQL statement with a User Defined View called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Data Model

Discovering Schemas

The Zoho Creator connector dynamically obtains the Zoho Creator Schemas. Reconnect to pick any metadata changes, such as added or removed columns or changes in data type.

Key Features

• The connector models Zoho Creator entities like documents, folders, and groups as relational views, allowing you to write SQL to query Zoho Creator data.
• Stored procedures allow you to execute operations to Zoho Creator
• Live connectivity to these objects means any changes to your Zoho Creator account are immediately reflected when using the connector.

Tables

Tables and Views will obtained dynamically from Zoho Creator.

Stored Procedures

Stored Procedures are function-like interfaces to Zoho Creator. Stored procedures allow you to execute operations to Zoho Creator, including downloading documents and moving envelopes.

Stored Procedures

Stored procedures are function-like interfaces that extend the functionality of the connector beyond simple SELECT/INSERT/UPDATE/DELETE operations with Zoho Creator.

Stored procedures accept a list of parameters, perform their intended function, and then return any relevant response data from Zoho Creator, along with an indication of whether the procedure succeeded or failed.

Zoho Creator Connector Stored Procedures

CreateSchema

Creates a schema definition of a table in ZohoCreator.

CreateSchema

Creates a local schema file (.rsd) from an existing table or view in the data model.

The schema file is created in the directory set in the Location connection property when this procedure is executed. You can edit the file to include or exclude columns, rename columns, or adjust column datatypes.

The connector checks the Location to determine if the names of any .rsd files match a table or view in the data model. If there is a duplicate, the schema file will take precedence over the default instance of this table in the data model. If a schema file is present in Location that does not match an existing table or view, a new table or view entry is added to the data model of the connector.

Input

Result Set Columns

DownloadFile

To Download a File.

Input

Result Set Columns

DownloadFileFromSubForm

To Download a File from a SubForm.

Input

Result Set Columns

GetOAuthAccessToken

Gets an authentication token from ZohoCreator.

Input

Result Set Columns

GetOAuthAuthorizationURL

Gets the authorization URL that must be opened separately by the user to grant access to your application. Only needed when developing Web apps. You will request the OAuthAccessToken from this URL.

Input

Result Set Columns

RefreshOAuthAccessToken

Refreshes the OAuth access token used for authentication with ZohoCreator.

Input

Result Set Columns

UploadFile

Uploads any file

Input

Result Set Columns

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for Zoho Creator:

• sys_catalogs: Lists the available databases.
• sys_schemas: Lists the available schemas.
• sys_tables: Lists the available tables and views.
• sys_tablecolumns: Describes the columns of the available tables and views.
• sys_procedures: Describes the available stored procedures.
• sys_procedureparameters: Describes stored procedure parameters.
• sys_keycolumns: Describes the primary and foreign keys.
• sys_indexes: Describes the available indexes.

Data Source Tables

The following tables return information about how to connect to and query the data source:

• sys_connection_props: Returns information on the available connection properties.
• sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

• sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs

Columns

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas

Columns

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables

Columns

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the [].[Employee Management].Leave_Types table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Leave_Types' AND CatalogName='' AND SchemaName='Employee Management'

Columns

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures

Columns

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the UploadFile stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='UploadFile' AND Direction=1 OR Direction=2

Columns

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the [].[Employee Management].Leave_Types table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Leave_Types' AND CatalogName='' AND SchemaName='Employee Management'

Columns

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'

Columns

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys

Columns

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'

Columns

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:zohocreator:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''

Columns

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity

Columns

sys_information

Describes the available system information.

The following query retrieves all columns:

SELECT * FROM sys_information

Columns

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

OAuth

Connection

SSL

Schema

Miscellaneous

OAuth

This section provides a complete list of OAuth properties you can configure.

InitiateOAuth

Set this property to initiate the process to obtain or refresh the OAuth access token when you connect.

Possible Values

OFF, GETANDREFRESH, REFRESH

Data Type

string

Default Value

OFF

Remarks

The following options are available:

1. OFF: Indicates that the OAuth flow will be handled entirely by the user. An OAuthAccessToken will be required to authenticate.
2. GETANDREFRESH: Indicates that the entire OAuth Flow will be handled by the connector. If no token currently exists, it will be obtained by prompting the user via the browser. If a token exists, it will be refreshed when applicable.
3. REFRESH: Indicates that the connector will only handle refreshing the OAuthAccessToken. The user will never be prompted by the connector to authenticate via the browser. The user must handle obtaining the OAuthAccessToken and OAuthRefreshToken initially.

OAuthClientId

The client ID assigned when you register your application with an OAuth authorization server.

Data Type

string

Default Value

""

Remarks

As part of registering an OAuth application, you will receive the OAuthClientId value, sometimes also called a consumer key, and a client secret, the OAuthClientSecret.

OAuthClientSecret

The client secret assigned when you register your application with an OAuth authorization server.

Data Type

string

Default Value

""

Remarks

As part of registering an OAuth application, you will receive the OAuthClientId, also called a consumer key. You will also receive a client secret, also called a consumer secret. Set the client secret in the OAuthClientSecret property.

OAuthAccessToken

The access token for connecting using OAuth.

Data Type

string

Default Value

""

Remarks

The OAuthAccessToken property is used to connect using OAuth. The OAuthAccessToken is retrieved from the OAuth server as part of the authentication process. It has a server-dependent timeout and can be reused between requests.

The access token is used in place of your user name and password. The access token protects your credentials by keeping them on the server.

OAuthSettingsLocation

The location of the settings file where OAuth values are saved when InitiateOAuth is set to GETANDREFRESH or REFRESH . Alternatively, you can hold this location in memory by specifying a value starting with 'memory://'.

Data Type

string

Default Value

%APPDATA%\ZohoCreator Data Provider\OAuthSettings.txt

Remarks

When InitiateOAuth is set to GETANDREFRESH or REFRESH, the connector saves OAuth values to avoid requiring the user to manually enter OAuth connection properties and to allow the credentials to be shared across connections or processes.

Instead of specifying a file path, you can use memory storage. Memory locations are specified by using a value starting with 'memory://' followed by a unique identifier for that set of credentials (for example, memory://user1). The identifier can be anything you choose but should be unique to the user. Unlike file-based storage, where credentials persist across connections, memory storage loads the credentials into static memory, and the credentials are shared between connections using the same identifier for the life of the process. To persist credentials outside the current process, you must manually store the credentials prior to closing the connection. This enables you to set them in the connection when the process is started again. You can retrieve OAuth property values with a query to the sys_connection_props system table. If there are multiple connections using the same credentials, the properties are read from the previously closed connection.

The default location is "%APPDATA%\ZohoCreator Data Provider\OAuthSettings.txt" with %APPDATA% set to the user's configuration directory. The default values are

• Windows: "register://%DSN"
• Unix: "%AppData%..."
• Mac: "%AppData%..."

where DSN is the name of the current DSN used in the open connection.

The following table lists the value of %APPDATA% by OS:

CallbackURL

The OAuth callback URL to return to when authenticating. This value must match the callback URL you specify in your app settings.

Data Type

string

Default Value

""

Remarks

During the authentication process, the OAuth authorization server redirects the user to this URL. This value must match the callback URL you specify in your app settings.

OAuthVerifier

The verifier code returned from the OAuth authorization URL.

Data Type

string

Default Value

""

Remarks

The verifier code returned from the OAuth authorization URL. This can be used on systems where a browser cannot be launched such as headless systems.

Authentication on Headless Machines

See to obtain the OAuthVerifier value.

Set OAuthSettingsLocation along with OAuthVerifier. When you connect, the connector exchanges the OAuthVerifier for the OAuth authentication tokens and saves them, encrypted, to the specified location. Set InitiateOAuth to GETANDREFRESH to automate the exchange.

Once the OAuth settings file has been generated, you can remove OAuthVerifier from the connection properties and connect with OAuthSettingsLocation set.

To automatically refresh the OAuth token values, set OAuthSettingsLocation and additionally set InitiateOAuth to REFRESH.

OAuthRefreshToken

The OAuth refresh token for the corresponding OAuth access token.

Data Type

string

Default Value

""

Remarks

The OAuthRefreshToken property is used to refresh the OAuthAccessToken when using OAuth authentication.

OAuthExpiresIn

The lifetime in seconds of the OAuth AccessToken.

Data Type

string

Default Value

""

Remarks

Pair with OAuthTokenTimestamp to determine when the AccessToken will expire.

OAuthTokenTimestamp

The Unix epoch timestamp in milliseconds when the current Access Token was created.

Data Type

string

Default Value

""

Remarks

Pair with OAuthExpiresIn to determine when the AccessToken will expire.

Connection

This section provides a complete list of connection properties you can configure.

ReportFormRelations

The mapping of the reports and forms in the application.

Data Type

string

Default Value

""

Remarks

The value can be in the format - ReportFormRelations="MyReport1=Form1;MyReport2=Form2,Form3;". Only mapped reports will support Insert, Update and Delete. Other reports will be read-only views.

Region

The Top-level domain in the Server URL.

Possible Values

Japan, US, China, Europe, India, Australia

Data Type

string

Default Value

US

Remarks

If your account resides in a domain other than the US, then change the Region accordingly. This table lists all possible values:

SSL

This section provides a complete list of SSL properties you can configure.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\ZohoCreator Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\ZohoCreator Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Schema

Specify the application name to connect with.

Data Type

string

Default Value

""

Remarks

Set this property to the Application Name to connect with.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

AccountsServer

The full Account Server URL.

Data Type

string

Default Value

""

Remarks

You only need to supply this when executing the RefreshOAuthAccessToken stored procedure with InitiateOAuth=Off. Most of the time, the value of this property will be https://accounts.zoho.com/, but if your account resides in a different location, then the domain should change accordingly (.eu, .in, .com.au, ...).

APIDomain

The full URL of the API domain.

Data Type

string

Default Value

""

Remarks

You only need to supply this when using your own OAuth access token with InitiateOAuth=Off. Otherwise, the API domain will be retrieved from the OAuth flow. Most of the time, the value of this property will be https://www.zohoapis.com, but if your account resides in a different location, then the domain should change accordingly (.eu, .in, .com.au, ...).

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

RowScanDepth

The maximum number of rows to scan to look for the columns available in a table.

Data Type

int

Default Value

100

Remarks

The columns in a table must be determined by scanning table rows. This value determines the maximum number of rows that will be scanned.

Setting a high value may decrease performance. Setting a low value may prevent the data type from being determined properly, especially when there is null data.

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UserDefinedViews

A filepath pointing to the JSON configuration file containing your custom views.

Data Type

string

Default Value

""

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

• Each root element defines the name of a view.
• Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM [].[Employee Management].Leave_Types WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.