IBM Informix Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.9039 of the connector.

Get Started

Informix Version Support

Compatibile with IBM Informix 9.70 and newer. The connector supports industry-standard Distributed Relational Database Architecture (DRDA) connectivity only.

Establish a Connection

Connect to Informix

Set the following properties to connect to Informix:

• Server: Set this to the name of the server running Informix.
• Port: Set this to the port the Informix server is listening on.
• Database: Set this to the name of the Informix database.
• User: Set this to the username of a user allowed to access the database.
• Password: Set this to the password of a user allowed to access the database.

Important Notes

Configuration Files and Their Paths

• All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Informix connector.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The Informix connector also supports setting client certificates. Set the following to connect using a client certificate.

• SSLClientCert: The name of the certificate store for the client certificate.
• SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
• SSLClientCertPassword: The password for the TLS/SSL client certificate.
• SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

SSL

SSH

Schema

Miscellaneous

Authentication

This section provides a complete list of authentication properties you can configure.

AuthScheme

The authentication mechanism that the provider will use to authenticate with Informix.

Possible Values

USRIDPWD, EUSRIDPWD

Data Type

string

Default Value

USRIDPWD

Remarks

• USRIDPWD: Set this to use user ID and password to authenticate.
• EUSRIDPWD: Set this to use encrypted user ID and encrypted password to authenticate.

Server

The name of the Informix server.

Data Type

string

Default Value

""

Remarks

This property should be set to the name or network address of the server hosting the Informix database.

Port

The port used to connect to the server hosting the database.

Data Type

string

Default Value

50000

Remarks

The port used to connect to the server hosting the database.

User

A database user.

Data Type

string

Default Value

""

Remarks

The username of a user authorized to access the database.

Password

The user's password.

Data Type

string

Default Value

""

Remarks

The password provided for authentication with the database.

Database

The name of the Informix database.

Data Type

string

Default Value

""

Remarks

The name of the Informix database running on the specified Server. To connect to the database, you will also need to specify a User and Password for a user authorized to access the database.

UseSSL

This field sets whether SSL is enabled.

Data Type

bool

Default Value

false

Remarks

This field sets whether the connector will attempt to negotiate TLS/SSL connections to the server. By default, the connector checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

AlternateServers

This property allows you to specify multiple servers in addition to the one configured in Server and Port . Specify both a server name and port; separate servers with a comma.

Data Type

string

Default Value

""

Remarks

This property allows you to specify the other servers in addition to the one configured in Server and Port. You must specify all servers using AlternateServers, Server, and Port.

Specify both a server name and port in AlternateServers; separate servers with a comma. For example:

Server=localhost;Port=27017;AlternateServers=localhost:27018,localhost:27019;

SSL

This section provides a complete list of SSL properties you can configure.

SSLClientCert

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Data Type

string

Default Value

""

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

SSLClientCertType

The type of key store containing the TLS/SSL client certificate.

Possible Values

USER, MACHINE, PFXFILE, PFXBLOB, JKSFILE, JKSBLOB, PEMKEY_FILE, PEMKEY_BLOB, PUBLIC_KEY_FILE, PUBLIC_KEY_BLOB, SSHPUBLIC_KEY_FILE, SSHPUBLIC_KEY_BLOB, P7BFILE, PPKFILE, XMLFILE, XMLBLOB

Data Type

string

Default Value

USER

Remarks

This property can take one of the following values:

SSLClientCertPassword

The password for the TLS/SSL client certificate.

Data Type

string

Default Value

""

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

SSLClientCertSubject

The subject of the TLS/SSL client certificate.

Data Type

string

Default Value

*

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, E=support@company.com". The common fields and their meanings are shown below.

If a field value contains a comma, it must be quoted.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

SSH

This section provides a complete list of SSH properties you can configure.

SSHAuthMode

The authentication method used when establishing an SSH Tunnel to the service.

Possible Values

None, Password, Public_Key

Data Type

string

Default Value

Password

Remarks

• None: No authentication is performed. The current User value is ignored, and the connection is logged in as anonymous.
• Password: The connector uses the values of User and Password to authenticate the user.
• Public_Key: The connector uses the values of User and SSHClientCert to authenticate the user. SSHClientCert must have a private key available for this authentication method to succeed.

SSHClientCert

A certificate to be used for authenticating the SSHUser.

Data Type

string

Default Value

""

Remarks

SSHClientCert must contain a valid private key in order to use public key authentication. A public key is optional, if one is not included then the connector generates it from the private key. The connector sends the public key to the server and the connection is allowed if the user has authorized the public key.

The SSHClientCertType field specifies the type of the key store specified by SSHClientCert. If the store is password protected, specify the password in SSHClientCertPassword.

Some types of key stores are containers which may include multiple keys. By default the connector will select the first key in the store, but you can specify a specific key using SSHClientCertSubject.

SSHClientCertPassword

The password of the SSHClientCert key if it has one.

Data Type

string

Default Value

""

Remarks

This property is only used when authenticating to SFTP servers with SSHAuthMode set to PublicKey and SSHClientCert set to a private key.

SSHClientCertSubject

The subject of the SSH client certificate.

Data Type

string

Default Value

*

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property.

If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For instance "CN=www.server.com, OU=test, C=US, E=example@jbexample.com". Common fields and their meanings are displayed below.

If a field value contains a comma it must be quoted.

SSHClientCertType

The type of SSHClientCert private key.

Possible Values

USER, MACHINE, PFXFILE, PFXBLOB, JKSFILE, JKSBLOB, PEMKEY_FILE, PEMKEY_BLOB, PPKFILE, PPKBLOB, XMLFILE, XMLBLOB

Data Type

string

Default Value

PEMKEY_FILE

Remarks

This property can take one of the following values:

SSHServer

The SSH server.

Data Type

string

Default Value

""

Remarks

The SSH server.

SSHPort

The SSH port.

Data Type

string

Default Value

22

Remarks

The SSH port.

SSHUser

The SSH user.

Data Type

string

Default Value

""

Remarks

The SSH user.

SSHPassword

The SSH password.

Data Type

string

Default Value

""

Remarks

The SSH password.

SSHServerFingerprint

The SSH server fingerprint.

Data Type

string

Default Value

""

Remarks

The SSH server fingerprint.

UseSSH

Whether to tunnel the Informix connection over SSH. Use SSH.

Data Type

bool

Default Value

false

Remarks

By default the connector will attempt to connect directly to Informix. When this option is enabled, the connector will instead establish an SSH connection with the SSHServer and tunnel the connection to Informix through it.

Schema

This section provides a complete list of schema properties you can configure.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\Informix Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\Informix Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

DBLocale

This property specifies what Charset/Encoding will be used to parse table data.

Data Type

string

Default Value

""

Remarks

If set this property to NULL or empty, the driver will use the SQLDAGRP.SQLCCSID as default Charset/Encoding, you can visit the documentation for details: https://www.ibm.com/docs/en/ims/15.1.0?topic=objects-sqldard-command-x2411.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting

QueryPassthrough

This option passes the query to the Informix server as is.

Data Type

bool

Default Value

false

Remarks

When this is set, queries are passed through directly to Informix.

SessionVariables

A semicolon-separated list of SET ENVIRONMENT commands to set on the current connection.

Data Type

string

Default Value

""

Remarks

A semicolon-separated list of SET ENVIRONMENT commands to set on the current connection. For example: 'sessionVariables="SET ENVIRONMENT DELIMIDENT ON;"'

SwitchMode

This property allows you to specify a switching mode to select a server from AlternateServers as the active server.

Possible Values

None, Failover, LoadBalance

Data Type

string

Default Value

Failover

Remarks

There are three switching modes available: None: Always use the default server. Failover: When the active server cannot be accessed, another server in AlternateServers will be used as the active server. LoadBalance: This option includes the feature of "Failover". In addition, the active server will also be changed after a transcation is committed.

Specify SwitchMode:

SwitchMode=Failover;

SwitchStrategy

This property allows you to specify a switching strategy to select a server from AlternateServers as the active server.

Possible Values

Sequence, Random, BestResponse

Data Type

string

Default Value

sequence

Remarks

There are three switching strategies available: Sequence: Always use the next server in AlternateServers as the active server. Random: Use a random server in AlternateServers as the active server. BestResponse: Always use the server with the shortest response time.

Specify SwitchStrategy:

SwitchStrategy=Random;

Timeout

A timeout for connections in seconds.

Data Type

string

Default Value

60

Remarks

Specify the timeout in seconds. If the Timeout property is set to 0, operations do not time out: they will run until they complete successfully or encounter an error condition.

An error condition will occur if Timeout expires and the operation is not yet complete.