Saltar al contenido

SAP ASE Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.9039 of the connector.

Get Started

Sybase Version Support

The connector enables connectivity to Sybase Database (SAP Adaptive Server) through the TDS protocol. ASE Versions 12, 15, and 16 are supported. Connecting to Sybase SQL Anywhere or Sybase IQ are not supported in this connector.

Establish a Connection

Connect to Sybase

To connect to the Sybase, specify the following connection properties:

  • Server: Set this to the name or network address of the Sybase database instance.
  • Database: Set this to the name of the Sybase database running on the specified Server.

Optionally, you can also secure your connections with TLS/SSL by setting UseSSL to true.

Authenticate to Sybase

Sybase supports several methods for authentication including basic, Kerberos, and, LDAP.

Basic

Set the AuthScheme to Basic and set the following connection properties to use Sybase authentication.

  • User: Set this to the username of the authenticating Sybase user.
  • Password: Set this to the username of the authenticating Sybase user.
LDAP

To connect with LDAP authentication, you will need to configure Sybase server-side to use the LDAP authentication mechanism.

After configuring Sybase for LDAP, you can connect using the same credentials as basic authentication.

Kerberos

To leverage Kerberos authentication, begin by enabling it via the following connection property:

  • AuthScheme: Set to Kerberos will be used for authentication to Sybase.

See Using Kerberos information regarding the connection properties that need to be set for Kerberos authentication.

You can find an example connection string below:

Server=MyServer;Port=MyPort;User=SampleUser;Password=SamplePassword;Database=MyDB;Kerberos=true;KerberosKDC=MyKDC;KerberosRealm=MYREALM.COM;KerberosSPN=server-name

Use Kerberos

Kerberos

To authenticate to Sybase with Kerberos, set AuthScheme to KERBEROS.

Authenticating to Sybase via Kerberos requires you to define authentication properties and to choose how Kerberos should retrieve authentication tickets.

Retrieve Kerberos Tickets

Kerberos tickets are used to authenticate the requester's identity. The use of tickets instead of formal logins/passwords eliminates the need to store passwords locally or send them over a network. Users are reauthenticated (tickets are refreshed) whenever they log in at their local computer or enter kinit USER at the command prompt.

The connector provides three ways to retrieve the required Kerberos ticket, depending on whether or not the KRB5CCNAME and/or KerberosKeytabFile variables exist in your environment.

MIT Kerberos Credential Cache File

This option enables you to use the MIT Kerberos Ticket Manager or kinit command to get tickets. With this option there is no need to set the User or Password connection properties.

This option requires that KRB5CCNAME has been created in your system.

To enable ticket retrieval via MIT Cerberos Credential Cache Files:

  1. Ensure that the KRB5CCNAME variable is present in your environment.
  2. Set KRB5CCNAME to a path that points to your credential cache file. (For example, C:\krb_cache\krb5cc_0 or /tmp/krb5cc_0.) The credential cache file is created when you use the MIT Kerberos Ticket Manager to generate your ticket.
  3. To obtain a ticket:

    1. Open the MIT Kerberos Ticket Manager application.
    2. Click Get Ticket.
    3. Enter your principal name and password.
    4. Click OK.

    If the ticket is successfully obtained, the ticket information appears in Kerberos Ticket Manager and is stored in the credential cache file.

The connector uses the cache file to obtain the Kerberos ticket to connect to Sybase.

Note

If you would prefer not to edit KRB5CCNAME, you can use the KerberosTicketCache property to set the file path manually. After this is set, the connector uses the specified cache file to obtain the Kerberos ticket to connect to Sybase.

Keytab File

If your environment lacks the KRB5CCNAME environment variable, you can retrieve a Kerberos ticket using a Keytab File.

To use this method, set the User property to the desired username, and set the KerberosKeytabFile property to a file path pointing to the keytab file associated with the user.

User and Password

If your environment lacks the KRB5CCNAME environment variable and the KerberosKeytabFile property has not been set, you can retrieve a ticket using a user and password combination.

To use this method, set the User and Password properties to the user/password combination that you use to authenticate with Sybase.

Enable Cross-Realm Authentication

More complex Kerberos environments can require cross-realm authentication where multiple realms and KDC servers are used. For example, they might use one realm/KDC for user authentication, and another realm/KDC for obtaining the service ticket.

To enable this kind of cross-realm authentication, set the KerberosRealm and KerberosKDC properties to the values required for user authentication. Also, set the KerberosServiceRealm and KerberosServiceKDC properties to the values required to obtain the service ticket.

Important Notes

Configuration Files and Their Paths

  • All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the Sybase connector.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Client SSL Certificates

The Sybase connector also supports setting client certificates. Set the following to connect using a client certificate.

  • SSLClientCert: The name of the certificate store for the client certificate.
  • SSLClientCertType: The type of key store containing the TLS/SSL client certificate.
  • SSLClientCertPassword: The password for the TLS/SSL client certificate.
  • SSLClientCertSubject: The subject of the TLS/SSL client certificate.

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

Property Description
AuthScheme The scheme used for authentication. Accepted entries are Password, Kerberos.
Server The name of the server running Sybase Database.
Port The port of the Sybase database.
Database The name of the Sybase database.
User The Sybase user account used to authenticate.
Password The password used to authenticate the user.
Charset Chaeset name to communicate with server.
UseSSL This field sets whether SSL is enabled.
AlternateServers This property allows you to specify multiple servers in addition to the one configured in Server and Port . Specify both a server name and port; separate servers with a comma.

Kerberos

Property Description
KerberosKDC The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm The Kerberos Realm used to authenticate the user.
KerberosSPN The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm The Kerberos realm of the service.
KerberosServiceKDC The Kerberos KDC of the service.
KerberosTicketCache The full file path to an MIT Kerberos credential cache file.

SSL

Property Description
SSLClientCert The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword The password for the TLS/SSL client certificate.
SSLClientCertSubject The subject of the TLS/SSL client certificate.
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

Schema

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Miscellaneous

Property Description
EncryptPassword This field sets whether password encryption is enabled.
IgnoreGroupNumber Whether to return group number (like ';num') of procedure when list procedures.
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
MaxTDSPacketSize The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048.
Other These hidden properties are used only in specific use cases.
QueryPassthrough This option passes the query to the Sybase server as is.
SwitchMode This property allows you to specify a switching mode to select a server from AlternateServers as the active server.
SwitchStrategy This property allows you to specify a switching strategy to select a server from AlternateServers as the active server.
TextSize SELECT statements return text, image, and unitext data up to the limit specified in this property.
Timeout A timeout for the provider.

Authentication

This section provides a complete list of authentication properties you can configure.

Property Description
AuthScheme The scheme used for authentication. Accepted entries are Password, Kerberos.
Server The name of the server running Sybase Database.
Port The port of the Sybase database.
Database The name of the Sybase database.
User The Sybase user account used to authenticate.
Password The password used to authenticate the user.
Charset Chaeset name to communicate with server.
UseSSL This field sets whether SSL is enabled.
AlternateServers This property allows you to specify multiple servers in addition to the one configured in Server and Port . Specify both a server name and port; separate servers with a comma.

AuthScheme

The scheme used for authentication. Accepted entries are Password, Kerberos.

Possible Values

Password, Kerberos

Data Type

string

Default Value

Password

Remarks

Together with Password and User, this field is used to authenticate against the server. Password is the default option. Use the following options to select your authentication scheme:

  • Password: Set this to use your Password.
  • Kerberos: Set this to use Kerberos authentication.

Server

The name of the server running Sybase Database.

Data Type

string

Default Value

""

Remarks

Set this property to the name or network address of the Sybase database instance.

Port

The port of the Sybase database.

Data Type

string

Default Value

5000

Remarks

The port of the Server hosting the Sybase Database.

Database

The name of the Sybase database.

Data Type

string

Default Value

""

Remarks

The name of the Sybase database running on the specified Server.

User

The Sybase user account used to authenticate.

Data Type

string

Default Value

""

Remarks

Together with Password, this field is used to authenticate against the Sybase server.

Password

The password used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The User and Password are together used to authenticate with the server.

Charset

Chaeset name to communicate with server.

Data Type

string

Default Value

""

Remarks

Chaeset name to communicate with server.

UseSSL

This field sets whether SSL is enabled.

Data Type

bool

Default Value

false

Remarks

This field sets whether the connector will attempt to negotiate TLS/SSL connections to the server. By default, the connector checks the server's certificate against the system's trusted certificate store. To specify another certificate, set SSLServerCert.

AlternateServers

This property allows you to specify multiple servers in addition to the one configured in Server and Port . Specify both a server name and port; separate servers with a comma.

Data Type

string

Default Value

""

Remarks

This property allows you to specify the other servers in addition to the one configured in Server and Port. You must specify all servers using AlternateServers, Server, and Port.

Specify both a server name and port in AlternateServers; separate servers with a comma. For example:

Server=localhost;Port=27017;AlternateServers=localhost:27018,localhost:27019;

Kerberos

This section provides a complete list of Kerberos properties you can configure.

Property Description
KerberosKDC The Kerberos Key Distribution Center (KDC) service used to authenticate the user.
KerberosRealm The Kerberos Realm used to authenticate the user.
KerberosSPN The service principal name (SPN) for the Kerberos Domain Controller.
KerberosKeytabFile The Keytab file containing your pairs of Kerberos principals and encrypted keys.
KerberosServiceRealm The Kerberos realm of the service.
KerberosServiceKDC The Kerberos KDC of the service.
KerberosTicketCache The full file path to an MIT Kerberos credential cache file.

KerberosKDC

The Kerberos Key Distribution Center (KDC) service used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The connector will request session tickets and temporary session keys from the Kerberos KDC service. The Kerberos KDC service is conventionally colocated with the domain controller.

If Kerberos KDC is not specified, the connector will attempt to detect these properties automatically from the following locations:

  • KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the connector will obtain the KDC from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux).
  • Java System Properties: Using the system properties java.security.krb5.realm and java.security.krb5.kdc.
  • Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the connector will infer them from the configured domain name and host.

Note

Windows authentication is supported in JRE 1.6 and above only.

KerberosRealm

The Kerberos Realm used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The Kerberos properties are used when using SPNEGO or Windows Authentication. The Kerberos Realm is used to authenticate the user with the Kerberos Key Distribution Service (KDC). The Kerberos Realm can be configured by an administrator to be any string, but conventionally it is based on the domain name.

If Kerberos Realm is not specified, the connector will attempt to detect these properties automatically from the following locations:

  • KRB5 Config File (krb5.ini/krb5.conf): If the KRB5_CONFIG environment variable is set and the file exists, the connector will obtain the default realm from the specified file. Otherwise, it will attempt to read from the default MIT location based on the OS: C:\ProgramData\MIT\Kerberos5\krb5.ini (Windows) or /etc/krb5.conf (Linux)
  • Java System Properties: Using the system properties java.security.krb5.realm and java.security.krb5.kdc.
  • Domain Name and Host: If the Kerberos Realm and Kerberos KDC could not be inferred from another location, the connector will infer them from the user-configured domain name and host. This might work in some Windows environments.

Note

Kerberos-based authentication is supported in JRE 1.6 and above only.

KerberosSPN

The service principal name (SPN) for the Kerberos Domain Controller.

Data Type

string

Default Value

""

Remarks

If the SPN on the Kerberos Domain Controller is not the same as the URL that you are authenticating to, use this property to set the SPN.

KerberosKeytabFile

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

Data Type

string

Default Value

""

Remarks

The Keytab file containing your pairs of Kerberos principals and encrypted keys.

KerberosServiceRealm

The Kerberos realm of the service.

Data Type

string

Default Value

""

Remarks

The KerberosServiceRealm is the specify the service Kerberos realm when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

KerberosServiceKDC

The Kerberos KDC of the service.

Data Type

string

Default Value

""

Remarks

The KerberosServiceKDC is used to specify the service Kerberos KDC when using cross-realm Kerberos authentication.

In most cases, a single realm and KDC machine are used to perform the Kerberos authentication and this property is not required.

This property is available for complex setups where a different realm and KDC machine are used to obtain an authentication ticket (AS request) and a service ticket (TGS request).

KerberosTicketCache

The full file path to an MIT Kerberos credential cache file.

Data Type

string

Default Value

""

Remarks

This property can be set if you wish to use a credential cache file that was created using the MIT Kerberos Ticket Manager or kinit command.

SSL

This section provides a complete list of SSL properties you can configure.

Property Description
SSLClientCert The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).
SSLClientCertType The type of key store containing the TLS/SSL client certificate.
SSLClientCertPassword The password for the TLS/SSL client certificate.
SSLClientCertSubject The subject of the TLS/SSL client certificate.
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

SSLClientCert

The TLS/SSL client certificate store for SSL Client Authentication (2-way SSL).

Data Type

string

Default Value

""

Remarks

The name of the certificate store for the client certificate.

The SSLClientCertType field specifies the type of the certificate store specified by SSLClientCert. If the store is password protected, specify the password in SSLClientCertPassword.

SSLClientCert is used in conjunction with the SSLClientCertSubject field in order to specify client certificates. If SSLClientCert has a value, and SSLClientCertSubject is set, a search for a certificate is initiated. See SSLClientCertSubject for more information.

Designations of certificate stores are platform-dependent.

The following are designations of the most common User and Machine certificate stores in Windows:

Property Description
MY A certificate store holding personal certificates with their associated private keys.
CA Certifying authority certificates.
ROOT Root certificates.
SPC Software publisher certificates.

In Java, the certificate store normally is a file containing certificates and optional private keys.

When the certificate store type is PFXFile, this property must be set to the name of the file. When the type is PFXBlob, the property must be set to the binary contents of a PFX file (for example, PKCS12 certificate store).

SSLClientCertType

The type of key store containing the TLS/SSL client certificate.

Possible Values

USER, MACHINE, PFXFILE, PFXBLOB, JKSFILE, JKSBLOB, PEMKEY_FILE, PEMKEY_BLOB, PUBLIC_KEY_FILE, PUBLIC_KEY_BLOB, SSHPUBLIC_KEY_FILE, SSHPUBLIC_KEY_BLOB, P7BFILE, PPKFILE, XMLFILE, XMLBLOB

Data Type

string

Default Value

USER

Remarks

This property can take one of the following values:

Property Description
USER - default For Windows, this specifies that the certificate store is a certificate store owned by the current user. Note that this store type is not available in Java.
MACHINE For Windows, this specifies that the certificate store is a machine store. Note that this store type is not available in Java.
PFXFILE The certificate store is the name of a PFX (PKCS12) file containing certificates.
PFXBLOB The certificate store is a string (base-64-encoded) representing a certificate store in PFX (PKCS12) format.
JKSFILE The certificate store is the name of a Java key store (JKS) file containing certificates. Note that this store type is only available in Java.
JKSBLOB The certificate store is a string (base-64-encoded) representing a certificate store in JKS format. Note that this store type is only available in Java.
PEMKEY_FILE The certificate store is the name of a PEM-encoded file that contains a private key and an optional certificate.
PEMKEY_BLOB The certificate store is a string (base64-encoded) that contains a private key and an optional certificate.
PUBLIC_KEY_FILE The certificate store is the name of a file that contains a PEM- or DER-encoded public key certificate.
PUBLIC_KEY_BLOB The certificate store is a string (base-64-encoded) that contains a PEM- or DER-encoded public key certificate.
SSHPUBLIC_KEY_FILE The certificate store is the name of a file that contains an SSH-style public key.
SSHPUBLIC_KEY_BLOB The certificate store is a string (base-64-encoded) that contains an SSH-style public key.
P7BFILE The certificate store is the name of a PKCS7 file containing certificates.
PPKFILE The certificate store is the name of a file that contains a PuTTY Private Key (PPK).
XMLFILE The certificate store is the name of a file that contains a certificate in XML format.
XMLBLOB The certificate store is a string that contains a certificate in XML format.

SSLClientCertPassword

The password for the TLS/SSL client certificate.

Data Type

string

Default Value

""

Remarks

If the certificate store is of a type that requires a password, this property is used to specify that password to open the certificate store.

SSLClientCertSubject

The subject of the TLS/SSL client certificate.

Data Type

string

Default Value

*

Remarks

When loading a certificate the subject is used to locate the certificate in the store.

If an exact match is not found, the store is searched for subjects containing the value of the property. If a match is still not found, the property is set to an empty string, and no certificate is selected.

The special value "*" picks the first certificate in the certificate store.

The certificate subject is a comma separated list of distinguished name fields and values. For example, "CN=www.server.com, OU=test, C=US, E=support@company.com". The common fields and their meanings are shown below.

Field Meaning
CN Common Name. This is commonly a host name like www.server.com.
O Organization
OU Organizational Unit
L Locality
S State
C Country
E Email Address

If a field value contains a comma, it must be quoted.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description Example
A full PEM Certificate (example shortened for brevity) -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate C:\\cert.cer
The public key (example shortened for brevity) -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated) ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated) 34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\Sybase Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\Sybase Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

Platform %APPDATA%
Windows The value of the APPDATA environment variable
Mac ~/Library/Application Support
Linux ~/.config

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

Property Description
EncryptPassword This field sets whether password encryption is enabled.
IgnoreGroupNumber Whether to return group number (like ';num') of procedure when list procedures.
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
MaxTDSPacketSize The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048.
Other These hidden properties are used only in specific use cases.
QueryPassthrough This option passes the query to the Sybase server as is.
SwitchMode This property allows you to specify a switching mode to select a server from AlternateServers as the active server.
SwitchStrategy This property allows you to specify a switching strategy to select a server from AlternateServers as the active server.
TextSize SELECT statements return text, image, and unitext data up to the limit specified in this property.
Timeout A timeout for the provider.

EncryptPassword

This field sets whether password encryption is enabled.

Data Type

bool

Default Value

false

Remarks

This field sets whether password encryption is enabled.

IgnoreGroupNumber

Whether to return group number (like ';num') of procedure when list procedures.

Data Type

bool

Default Value

true

Remarks

Whether to return group number (like ';num') of procedure when list procedures. If set to true, group num will not return.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

MaxTDSPacketSize

The protocol sending and receiving buffer size. For the lower version, it's from 512 to 512. For the newer version, it's from 512 to 2048.

Data Type

string

Default Value

512

Remarks

MaxTDSPacketSize allows you to control the protocol sending and receiving buffer size.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting
Property Description
DefaultColumnSize Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename Records the underlying socket data transfer to the specified file.

QueryPassthrough

This option passes the query to the Sybase server as is.

Data Type

bool

Default Value

false

Remarks

When this is set, queries are passed through directly to Sybase.

SwitchMode

This property allows you to specify a switching mode to select a server from AlternateServers as the active server.

Possible Values

None, Failover, LoadBalance

Data Type

string

Default Value

Failover

Remarks

There are three switching modes available: None: Always use the default server. Failover: When the active server cannot be accessed, another server in AlternateServers will be used as the active server. LoadBalance: This option includes the feature of "Failover". In addition, the active server will also be changed after a transcation is committed.

Specify SwitchMode:

SwitchMode=Failover;

SwitchStrategy

This property allows you to specify a switching strategy to select a server from AlternateServers as the active server.

Possible Values

Sequence, Random, BestResponse

Data Type

string

Default Value

sequence

Remarks

There are three switching strategies available: Sequence: Always use the next server in AlternateServers as the active server. Random: Use a random server in AlternateServers as the active server. BestResponse: Always use the server with the shortest response time.

Specify SwitchStrategy:

SwitchStrategy=Random;

TextSize

SELECT statements return text, image, and unitext data up to the limit specified in this property.

Data Type

int

Default Value

32768

Remarks

The default value of TextSize is 32768(32K), the maximum value is 2147483647(2GB - 1Byte).

Timeout

A timeout for the provider.

Data Type

int

Default Value

30

Remarks

If the Timeout property is set to 0, operations will not time out; instead, they will run until they complete successfully or encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector raises an error condition.