Skip to Content

SAP Business One Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.8852 of the connector.

Get Started

SAP Business One Version Support

The connector enables standards-based access to SAP Business One On-Premises and Cloud editions 9.1, 9.2, 9.3, and 10.0, surfacing the entities available in the SAP Business One Service Layer by querying the underlying OData API.

Establish a Connection

Connect to SAP Business One APIs

To connect to data, specify the following:

  • URL: Set this to your SAP Business One Service Layer root URL.
  • CompanyDB: Set this to your SAP Business One company database.

Authenticate to SAP Business One APIs

To authenticate to SAP Business One, you must provide the User and Password connection properties.

Important Notes

Configuration Files and Their Paths

  • All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Advanced Features

This section details a selection of advanced features of the SAP Business One connector.

User Defined Views

The connector allows you to define virtual tables, called user defined views, whose contents are decided by a pre-configured query. These views are useful when you cannot directly control queries being issued to the drivers. See User Defined Views for an overview of creating and configuring custom views.

SSL Configuration

Use SSL Configuration to adjust how connector handles TLS/SSL certificate negotiations. You can choose from various certificate formats; see the SSLServerCert property under "Connection String Options" for more information.

Proxy

To configure the connector using private agent proxy settings, select the Use Proxy Settings checkbox on the connection configuration screen.

Query Processing

The connector offloads as much of the SELECT statement processing as possible to SAP Business One and then processes the rest of the query in memory (client-side).

See Query Processing for more information.

User Defined Views

The SAP Business One connector allows you to define a virtual table whose contents are decided by a pre-configured query. These are called User Defined Views, which are useful in situations where you cannot directly control the query being issued to the driver, e.g. when using the driver from Jitterbit. The User Defined Views can be used to define predicates that are always applied. If you specify additional predicates in the query to the view, they are combined with the query already defined as part of the view.

There are two ways to create user defined views:

  • Create a JSON-formatted configuration file defining the views you want.
  • DDL statements.

Define Views Using a Configuration File

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

  • Each root element defines the name of a view.
  • Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM Orders WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", "C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json"

Define Views Using DDL Statements

The connector is also capable of creating and altering the schema via DDL Statements such as CREATE LOCAL VIEW, ALTER LOCAL VIEW, and DROP LOCAL VIEW.

Create a View

To create a new view using DDL statements, provide the view name and query as follows:

CREATE LOCAL VIEW [MyViewName] AS SELECT * FROM Customers LIMIT 20;

If no JSON file exists, the above code creates one. The view is then created in the JSON configuration file and is now discoverable. The JSON file location is specified by the UserDefinedViews connection property.

Alter a View

To alter an existing view, provide the name of an existing view alongside the new query you would like to use instead:

ALTER LOCAL VIEW [MyViewName] AS SELECT * FROM Customers WHERE TimeModified > '3/1/2020';

The view is then updated in the JSON configuration file.

Drop a View

To drop an existing view, provide the name of an existing schema alongside the new query you would like to use instead.

DROP LOCAL VIEW [MyViewName]

This removes the view from the JSON configuration file. It can no longer be queried.

Schema for User Defined Views

User Defined Views are exposed in the UserViews schema by default. This is done to avoid the view's name clashing with an actual entity in the data model. You can change the name of the schema used for UserViews by setting the UserViewsSchemaName property.

Work with User Defined Views

For example, a SQL statement with a User Defined View called UserViews.RCustomers only lists customers in Raleigh:

SELECT * FROM Customers WHERE City = 'Raleigh';

An example of a query to the driver:

SELECT * FROM UserViews.RCustomers WHERE Status = 'Active';

Resulting in the effective query to the source:

SELECT * FROM Customers WHERE City = 'Raleigh' AND Status = 'Active';

That is a very simple example of a query to a User Defined View that is effectively a combination of the view query and the view definition. It is possible to compose these queries in much more complex patterns. All SQL operations are allowed in both queries and are combined when appropriate.

SSL Configuration

Customize the SSL Configuration

By default, the connector attempts to negotiate SSL/TLS by checking the server's certificate against the system's trusted certificate store.

To specify another certificate, see the SSLServerCert property for the available formats to do so.

Data Model

The SAP Business One connector connects to SAP Business One Service Layer, an OData service, to model entities in relational Tables and Views. The table definitions are dynamically obtained from the SAP Business One Service Layer. Any changes in the metadata, such as added or removed columns or changes in data type, can be loaded by reconnecting.

Tables

The connector models the writable entity sets and singletons described in the service metadata document as bidirectional Tables.

Views

Some OData entities can only be accessed through Navigation Properties. By default, the connector models navigation properties as separate views. You can disable this behavior with NavigationPropertiesAsViews. See Views for more information on querying navigation properties.

Tables

The connector exposes tables for every entity set and singleton defined on the SAP Business One Service Layer root URL. Entities on these tables may be inserted, updated, or deleted using standard SQL insert, update, or delete statements.

Executing Deep Inserts with SQL

The connector supports OData deep inserts, in which you simultaneously create a base entity and link it to related entities, by specifying navigation properties. To specify Navigation Properties for an entity, you create a temporary table for the navigation property and then reference the temporary table in the insert to the base table. Reference the temporary table in the appropriate navigation property column on the base table. Each navigation property column is prefixed with the word "Linked".

Note that you must define the temporary tables and insert to the base entity within the same connection.

Example: Deep Inserts in Northwind

For example, consider the Orders table in Northwind odata.org test service. To create a new Order, you specify the Products ordered, Customer, Employee, and Shipper. To do so, you need to specify the following navigation properties.

Creating Temporary Tables

Insert the related entities into temporary tables that correspond to each navigation property. You can specify an existing entity's primary key or you can insert a new entity.

  • Customer: The following statement creates a new Customer:

    INSERT INTO Customers#TEMP (CustomerID, CompanyName, ContactName, ContactTitle, Address, City, PostalCode, Country, Phone, Fax)
    
    VALUES ('VINET', 'Vins et alcools Chevalier', 'Paul Henriot', 'Accounting Manager', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '26.47.15.10', '26.47.15.11')
    
  • Order Details: The following statements add two Products to the Order:

    INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (72, 34.80, 5, 0)
    
    INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (42, 9.80, 10, 0)
    
  • Employee: The following statement specifies the existing Employee:

    INSERT INTO Employees#TEMP (EmployeeID)
    VALUES (5)
    
  • Shipper: The following statement specifies the existing Shipper:

    INSERT INTO Shippers#TEMP (ShipperID) VALUES (3)
    

The SAP Business One connector will assume that the Shipper and Employee already exist and will only link to the existing references since only the primary keys were specified for either. When more than just the primary key is defined, such as the examples for Customer and Order_Details, the SAP Business One connector will attempt to create new entries - triggering the deep insert.

Inserting the Entity

In the INSERT statement for the base entity, reference the temporary tables in the LinkedOrder_Details, LinkedCustomer, LinkedEmployee, and LinkedShipper columns:

INSERT INTO Orders (CustomerID, EmployeeID, ShipVia, ShipName, ShipAddress, ShipCity, ShipPostalCode, ShipCountry, OrderDate, LinkedOrder_Details, LinkedCustomer, LinkedEmployee, LinkedShipper) VALUES ('VINET', 5, 3, 'Paul Henriot', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '07/04/1996', 'Order_Details#TEMP', 'Customers#TEMP', 'Employees#TEMP', 'Shippers#TEMP')
Code Example

Below is the complete code to create the new Order:

Connection conn = DriverManager.getConnection("jdbc:sapbusinessone:Url=http://localhost:50000/b1s/v1;User=username;Password=password;CompanyDB=dbname;");
Statement stat = conn.createStatement();
stat.executeUpdate("INSERT INTO Customers#TEMP (CustomerID, CompanyName, ContactName, ContactTitle, Address, City, PostalCode, Country, Phone, Fax) VALUES ('VINET', 'Vins et alcools Chevalier', 'Paul Henriot', 'Accounting Manager', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '26.47.15.10', '26.47.15.11')");

stat.executeUpdate("INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (72, 34.80, 5, 0)");

stat.executeUpdate("INSERT INTO Order_Details#TEMP (ProductID, UnitPrice, Quantity, Discount) VALUES (42, 9.80, 10, 0)");

stat.executeUpdate("INSERT INTO Employees#TEMP (EmployeeID) VALUES (5)");

stat.executeUpdate("INSERT INTO Shippers#TEMP (ShipperID) VALUES (3)");

stat.executeUpdate("INSERT INTO Orders (CustomerID, EmployeeID, ShipVia, ShipName, ShipAddress, ShipCity, ShipPostalCode, ShipCountry, OrderDate, LinkedOrder_Details, LinkedCustomer, LinkedEmployee, LinkedShipper) VALUES ('VINET', 5, 3, 'Paul Henriot', '59 rue de l''Abbaye', 'Reims', '51100', 'France', '07/04/1996', 'Order_Details#TEMP', 'Customers#TEMP', 'Employees#TEMP', 'Shippers#TEMP')");

stat.close();

Views

Modeling Navigation Properties

By default, the connector models Navigation Properties as separate views. The views are named in the format ParentTable_NavigationProperty. You can disable this behavior with NavigationPropertiesAsViews.

Querying Navigation Properties

For an example of working with a navigation property as a view, consider BusinessPartners. The BusinessPartners entity set has an Orders navigation property. The SAP Business One connector will display a view called BusinessPartners_Orders for this service. Retrieving data from BusinessPartners_Orders will display all of the Orders associated with a given BusinessPartner. The BusinessPartners_Orders view has a primary key made up of the primary key of the parent entity and the primary key of the related entity.

Support for navigation properties is currently limited in SAP Business One Service Layer. As of the time of this writing, it is only supported in ODataVersion 3.0. See NavigationPropertiesAsViews to toggle the behavior of this functionality.

Navigation Properties

In OData, a navigation property is a property on an entity that is itself either a single entity or list of entities.

A single-entity navigation property signifies a one-to-one relationship; for example, an OData service might allow a Product to have only one Category. In this service, Category might be a navigation property on Products.

An entity set navigation property signifies a one-to-many relationship; for example, many Products can belong in the same Category. In this service, Products might be a navigation property on Categories.

Working with Navigation Properties Relationally

Navigation properties in OData link related entities. Similarly, in a relational database, a foreign key serves to link tables. For example, a Product record might have a CategoryId column, which uniquely identifies what Category the Product belongs to. However, there is no requirement in OData that an entity must contain a foreign key reference to a related entity. This means sometimes you will get navigation properties without having a foreign key reference to that entity on the parent or back to the parent from the related entity. In cases without a foreign key reference, the navigation property's existence is the only thing that can be used to identify a relationship between the two entities.

Select

NavigationPropertiesAsViews is useful for accessing data in OData services that lack foreign key references. Likewise, it can be used to retrieve related entities that do not exist by themselves such as LineItems on an Invoice. See Views for more information on querying navigation properties.

Insert

The connector supports OData deep inserts. See Tables for more information on specifying navigation properties when you create an entity.

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for SAP Business One:

Data Source Tables

The following tables return information about how to connect to and query the data source:

  • sys_connection_props: Returns information on the available connection properties.
  • sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

  • sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs
Columns
Name Type Description
CatalogName String The database name.

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas
Columns
Name Type Description
CatalogName String The database name.
SchemaName String The schema name.

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables
Columns
Name Type Description
CatalogName String The database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view.
TableType String The table type (table or view).
Description String A description of the table or view.
IsUpdateable Boolean Whether the table can be updated.

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Orders table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Orders'
Columns
Name Type Description
CatalogName String The name of the database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view containing the column.
ColumnName String The column name.
DataTypeName String The data type name.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The storage size of the column.
DisplaySize Int32 The designated column's normal maximum width in characters.
NumericPrecision Int32 The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The column scale or number of digits to the right of the decimal point.
IsNullable Boolean Whether the column can contain null.
Description String A brief description of the column.
Ordinal Int32 The sequence number of the column.
IsAutoIncrement String Whether the column value is assigned in fixed increments.
IsGeneratedColumn String Whether the column is generated.
IsHidden Boolean Whether the column is hidden.
IsArray Boolean Whether the column is an array.
IsReadOnly Boolean Whether the column is read-only.
IsKey Boolean Indicates whether a field returned from sys_tablecolumns is the primary key of the table.

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures
Columns
Name Type Description
CatalogName String The database containing the stored procedure.
SchemaName String The schema containing the stored procedure.
ProcedureName String The name of the stored procedure.
Description String A description of the stored procedure.
ProcedureType String The type of the procedure, such as PROCEDURE or FUNCTION.

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2
Columns
Name Type Description
CatalogName String The name of the database containing the stored procedure.
SchemaName String The name of the schema containing the stored procedure.
ProcedureName String The name of the stored procedure containing the parameter.
ColumnName String The name of the stored procedure parameter.
Direction Int32 An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataTypeName String The name of the data type.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericPrecision Int32 The maximum precision for numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The number of digits to the right of the decimal point in numeric data.
IsNullable Boolean Whether the parameter can contain null.
IsRequired Boolean Whether the parameter is required for execution of the procedure.
IsArray Boolean Whether the parameter is an array.
Description String The description of the parameter.
Ordinal Int32 The index of the parameter.

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the Orders table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Orders'
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
IsKey Boolean Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey Boolean Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.
ForeignKeyType String Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
KeySeq String The sequence number of the primary key.
KeyName String The name of the primary key.

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'
Columns
Name Type Description
CatalogName String The name of the database containing the index.
SchemaName String The name of the schema containing the index.
TableName String The name of the table containing the index.
IndexName String The index name.
ColumnName String The name of the column associated with the index.
IsUnique Boolean True if the index is unique. False otherwise.
IsPrimary Boolean True if the index is a primary key. False otherwise.
Type Int16 An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder String The sort order: A for ascending or D for descending.
OrdinalPosition Int16 The sequence number of the column in the index.

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:sapbusinessone:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''
Columns
Name Type Description
Name String The name of the connection property.
ShortDescription String A brief description.
Type String The data type of the connection property.
Default String The default value if one is not explicitly set.
Values String A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value String The value you set or a preconfigured default.
Required Boolean Whether the property is required to connect.
Category String The category of the connection property.
IsSessionProperty String Whether the property is a session property, used to save information about the current connection.
Sensitivity String The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName String A camel-cased truncated form of the connection property name.
Ordinal Int32 The index of the parameter.
CatOrdinal Int32 The index of the parameter category.
Hierarchy String Shows dependent properties associated that need to be set alongside this one.
Visible Boolean Informs whether the property is visible in the connection UI.
ETC String Various miscellaneous information about the property.

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

Name Description Possible Values
AGGREGATE_FUNCTIONS Supported aggregation functions. AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT Whether COUNT function is supported. YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR The opening character used to escape an identifier. [
IDENTIFIER_QUOTE_CLOSE_CHAR The closing character used to escape an identifier. ]
SUPPORTED_OPERATORS A list of supported SQL operators. =, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY Whether GROUP BY is supported, and, if so, the degree of support. NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
STRING_FUNCTIONS Supported string functions. LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS Supported numeric functions. ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS Supported date/time functions. NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION Indicates if the provider supports transactions such as commit and rollback. YES, NO
DIALECT Indicates the SQL dialect to use.
KEY_PROPERTIES Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS Indicates if multiple schemas may exist for the provider. YES, NO
SUPPORTS_MULTIPLE_CATALOGS Indicates if multiple catalogs may exist for the provider. YES, NO
DATASYNCVERSION The Data Sync version needed to access this driver. Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY The Data Sync category of this driver. Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL Whether enhanced SQL functionality beyond what is offered by the API is supported. TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS Whether batch operations are supported. YES, NO
SQL_CAP All supported SQL capabilities for this driver. SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side. YES, NO
PSEUDO_COLUMNS A string array indicating the available pseudo columns.
MERGE_ALWAYS If the value is true, The Merge Mode is forcibly executed in Data Sync. TRUE, FALSE
REPLICATION_MIN_DATE_QUERY A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID Indicates whether the CheckCache statement should be done against the parent key column. TRUE, FALSE
CREATE_SCHEMA_PROCEDURES Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns
Name Type Description
NAME String A component of SQL syntax, or a capability that can be processed on the server.
VALUE String Detail on the supported SQL or SQL syntax.

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity
Columns
Name Type Description
Id String The database-generated ID returned from a data modification operation.
Batch String An identifier for the batch. 1 for a single operation.
Operation String The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message String SUCCESS or an error message if the update in the batch failed.

Data Type Mapping

Data Type Mappings

The connector maps types from the data source to the corresponding data type available in the schema. The table below documents these mappings.

SAP Business One (OData V3) SAP Business One (OData V4) Schema
Edm.Binary Edm.Binary binary
Edm.Boolean Edm.Boolean bool
Edm.DateTime Edm.DateTimeOffset datetime
Edm.Double Edm.Double double
Edm.Guid Edm.Guid guid
Edm.Int32 Edm.Int32 int
Edm.String Edm.String string
Edm.TimeOfDay Edm.TimeOfDay time

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

Property Description
URL URL to the SAP Business One Service Layer root. For example, http://localhost:50000/b1s/v1.
User The SAP Business One user account used to authenticate.
Password The password used to authenticate the user.

Connection

Property Description
CompanyDB Your SAP Business One company database.

SSL

Property Description
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

Schema

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Miscellaneous

Property Description
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
NavigationPropertiesAsViews A boolean indicating navigation properties should be promoted to full views.
ODataVersion The version of OData to use. By default the provider will attempt to autodetect the version.
Other These hidden properties are used only in specific use cases.
PseudoColumns This property indicates whether or not to include pseudo columns as columns to the table.
Timeout The value in seconds until the timeout error is thrown, canceling the operation.
UserDefinedViews A filepath pointing to the JSON configuration file containing your custom views.
UseSimpleNames Boolean determining if simple names should be used for tables and columns.

Authentication

This section provides a complete list of authentication properties you can configure.

Property Description
URL URL to the SAP Business One Service Layer root. For example, http://localhost:50000/b1s/v1.
User The SAP Business One user account used to authenticate.
Password The password used to authenticate the user.

URL

URL to the SAP Business One Service Layer root. For example, http://localhost:50000/b1s/v1.

Data Type

string

Default Value

""

Remarks

The URL should appear in the format http://\[server\]:\[port\]/b1s/\[version\].

User

The SAP Business One user account used to authenticate.

Data Type

string

Default Value

""

Remarks

Together with Password, this field is used to authenticate against the SAP Business One server.

Password

The password used to authenticate the user.

Data Type

string

Default Value

""

Remarks

The User and Password are together used to authenticate with the server.

Connection

This section provides a complete list of connection properties you can configure.

Property Description
CompanyDB Your SAP Business One company database.

CompanyDB

Your SAP Business One company database.

Data Type

string

Default Value

""

Remarks

The SAP Business One company database you are connecting to. This is required for all connections.

SSL

This section provides a complete list of SSL properties you can configure.

Property Description
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description Example
A full PEM Certificate (example shortened for brevity) -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate C:\\cert.cer
The public key (example shortened for brevity) -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated) ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated) 34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\SAPBusinessOne Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\SAPBusinessOne Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

Platform %APPDATA%
Windows The value of the APPDATA environment variable
Mac ~/Library/Application Support
Linux ~/.config

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

Property Description
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
NavigationPropertiesAsViews A boolean indicating navigation properties should be promoted to full views.
ODataVersion The version of OData to use. By default the provider will attempt to autodetect the version.
Other These hidden properties are used only in specific use cases.
PseudoColumns This property indicates whether or not to include pseudo columns as columns to the table.
Timeout The value in seconds until the timeout error is thrown, canceling the operation.
UserDefinedViews A filepath pointing to the JSON configuration file containing your custom views.
UseSimpleNames Boolean determining if simple names should be used for tables and columns.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

NavigationPropertiesAsViews

A boolean indicating navigation properties should be promoted to full views.

Data Type

bool

Default Value

false

Remarks

This property can be useful for SAP Business One, which can return related collections of entities, or navigation properties. Some SAP Business One entities may only be accessed through navigation properties. NavigationPropertiesAsViews will cause all of the discovered navigation properties to be added as views in the format ParentTable_NavigationProperty. At the time of this writing, SAP Business One only supports Navigation Properties when using ODataVersion 3.0.

ODataVersion

The version of OData to use. By default the provider will attempt to autodetect the version.

Possible Values

AUTO, 3.0, 4.0

Data Type

string

Default Value

AUTO

Remarks

The version of OData to use. By default the connector will automatically attempt to determine the version the service is using. If a version cannot be resolved, 3.0 will be used. This can optionally be manually set.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting
Property Description
DefaultColumnSize Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename Records the underlying socket data transfer to the specified file.

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UserDefinedViews

A filepath pointing to the JSON configuration file containing your custom views.

Data Type

string

Default Value

""

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

  • Each root element defines the name of a view.
  • Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM Orders WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.

UseSimpleNames

Boolean determining if simple names should be used for tables and columns.

Data Type

bool

Default Value

false

Remarks

SAP Business One tables and columns can use special characters in names that are normally not allowed in standard databases. UseSimpleNames makes the connector easier to use with traditional database tools.

Setting UseSimpleNames to true will simplify the names of tables and columns returned. It will enforce a naming scheme such that only alphanumeric characters and the underscore are valid for the displayed table and column names. Any nonalphanumeric characters will be converted to an underscore.