Skip to Content

Active Campaign Connection Details

Introduction

Connector Version

This documentation is based on version 23.0.8804 of the connector.

Get Started

ActiveCampaign Version Support

The connector leverages version 3 of the ActiveCampaign API to enable bidirectional access to ActiveCampaign data.

Establish a Connection

Connect to ActiveCampaign

ActiveCampaign supports authenticating with the API Key. To connect to ActiveCampaign, in your account navigate to the Developer page and set the following:

  • URL: Navigate to the My Settings page to set this property. For example: https://<yourAccountName>.api-us1.com
  • APIKey: Navigate to the Settings page to set this property. Each user in your ActiveCampaign account has their own unique API key.

Make sure to distinguish between My Settings and Settings when setting these properties.

Important Notes

Configuration Files and Their Paths

  • All references to adding configuration files and their paths refer to files and locations on the Jitterbit agent where the connector is installed. These paths are to be adjusted as appropriate depending on the agent and the operating system. If multiple agents are used in an agent group, identical files will be required on each agent.

Data Model

Overview

The connector models ActiveCampaign resources like Contacts, Accounts as relational tables, allowing you to write SQL to query ActiveCampaign data.

Live connectivity to these objects means any changes to your ActiveCampaign account are immediately reflected when using the connector.

Views

Views are tables that cannot be modified. Typically, data that are read-only and cannot be updated are shown as views.

Dynamic Views

Along with the default static views, the connector also allows querying on dynamic views.

These are views that are created based on the "lists" (also called "audiences") in your ActiveCampaign account.
For example, suppose you have these 3 lists in your account: Master Contact List, New Audience, VIP List.

The connector lists 3 views based on them: List_MasterList, List_New Audience, List_VIP List.
The views return data about each contact that is a member of that specific list.

Tables

Tables describes the available tables. Tables are statically defined to model resources like Accounts, Deals, DealGroups, DealStages, Tasks, etc.

The connector also supports querying tables like AccountCustomFieldData, DealCustomFieldData, ContactCustomFieldData which represent custom field data information.

Additionally, the connector supports updating, inserting custom fields data from the main resource (available for the Accounts, Contacts, Deals tables) where custom fields are dynamically appended as main resource columns. See the specific table section for more information.

Tables

The connector models the data in ActiveCampaign as a list of tables in a relational database that can be queried using standard SQL statements.

Jitterbit Connector for ActiveCampaign Tables

Name Description
AccountContacts Usage information for the operation AccountContacts.rsd.
AccountCustomFieldData Create, modify, delete and query the available deal custom field data in ActiveCampaign.
Accounts View many or all contacts by including their ID's or various filters.
ContactCustomFieldData Create, modify, delete and query the available contact custom field data in ActiveCampaign.
Contacts View many or all contacts by including their ID's or various filters.
DealCustomFieldData Create, modify, delete and query the available deal custom field data in ActiveCampaign.
DealGroups Lists all existing accounts.
Deals Usage information for the operation Deals.rsd.
DealStages Usage information for the operation DealStages.rsd.
Tasks Lists all existing accounts.

AccountContacts

Usage information for the operation AccountContacts.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM AccountContacts WHERE Id = 10003

SELECT * FROM AccountContacts WHERE AccountId = 1 AND ContactId = 100
Insert

Inserting an account-contact association requires specifying a value for the AccountId and ContactId columns.

INSERT INTO AccountContacts (AccountId, ContactId) VALUES (2, 300)

INSERT INTO AccountContacts (AccountId, ContactId, Jobtitle) VALUES (2, 300, 'nurse')
Update

The driver supports updating account-contact information.

UPDATE AccountContacts SET ContactId = 3, JobTitle = 'updatedJobTitle' WHERE Id = 1

UPDATE AccountContacts SET JobTitle = 'updatedJobTitle' WHERE AccountId = 1
Delete

Remove all account-contacts association or an association by specifying the ID of the association.

DELETE FROM AccountContacts WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID of the account-contact association.
AccountId String False The account Id.
ContactId String False The contact Id.
CreatedTimestamp Datetime True Datetime value which indicates when the assosiaction was created.
JobTitle String False Job Title of the contact at the account.
AccountLink String True Account link.
ContactLink String True Contact link.
UpdatedTimestamp Datetime True Datetime value which indicates when the assosiaction was last updated.

AccountCustomFieldData

Create, modify, delete and query the available deal custom field data in ActiveCampaign.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM AccountCustomFieldData WHERE Id = 10003

SELECT * FROM AccountCustomFieldData WHERE AccountId = 1
Insert

Inserting an account custom field data requires specifying a value for the AccountId, CustomFieldId, FieldValue columns.

Additionally, the connector supports inserting account custom fields data from the Accounts table. See Accounts for more information.

INSERT INTO AccountCustomFieldData (FieldValue, CustomFieldId, AccountId) VALUES ('custom field value', 1, 5)
Update

The connector supports updating account custom field data information. Updating an account custom field data requires specifying a value for the ID and CustomFieldId columns.

Additionally, it is possible to update account custom fields data from the Accounts table.

UPDATE AccountCustomFieldData SET FieldValue = 'Custom Field Value' WHERE ID = 13 AND CustomFieldId = 1
Delete

The connector supports removing accounts' custom field data.

DELETE FROM AccountcustomFieldData WHERE ID = 10
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID of the account custom field data.
AccountCustomFieldMetumId Integer True The custom field metum Id.
AccountId Integer False The ID of the account the field value relates to.
CreatedTimestamp Datetime True Datetime value that indicates when the custom field value was set.
CustomFieldId Integer False The ID of the custom field metum the field value relates to.
CustomFieldName String True The name of the custom field metum the field value relates to.
FieldValue String False Values for the field. (For currency field only, this needs to be in cents: eg, 10050 = 100.5).
AccountLink String True Account link.
AccountCustomFieldMetumLink String True AccountCustomFieldMetum link.
UpdatedTimestamp Datetime True Datetime value which indicates when the custom field data was last updated.
FieldCurrency String False Value of the custom field currency type for a specific contact. This field is required when inserting currency custom fields.

Accounts

View many or all contacts by including their ID's or various filters.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Accounts WHERE Id = 10003

SELECT * FROM Accounts WHERE Name = 'testAccount'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the AccountCustomFieldData table.

Insert

Inserting an account requires specifying the account name.

INSERT INTO Accounts (Name) VALUES ('testAccount2')

INSERT INTO Accounts (Name, AccountUrl) VALUES ('account', 'http://accountUrl.com/')

Additionally, the connector supports inserting account and account custom fields data from the Accounts table. All custom field columns start with CF_.

INSERT INTO Accounts (Name, CF_Description, CF_Hidden, CF_Number) VALUES ('testAccount3', 'custom field value', 'custom field value', 123)
Update

The connector supports updating account information.

Additionally, it is possible to update account custom fields data from the Accounts table.

UPDATE Accounts SET Name = 'updatedName', AccountUrl = 'http://updatedAccountUrl.com/' WHERE Id = 1

UPDATE Accounts SET Name = 'updatedName', CF_Description = 'custom field value', CF_Hidden = 'custom field value' WHERE ID = 1
Delete

Remove all accounts or an account by specifying the ID of the account.

DELETE FROM Accounts WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID column of the Accounts table.
AccountUrl String False Account's website.
ContactCount Integer True The ContactCount column of the Accounts table.
CreatedTimestamp Datetime True The CreatedTimestamp column of the Accounts table.
DealCount Integer True The DealCount column of the Accounts table.
AccountContactsLink String True The AccountContactsLink column of the Accounts table.
AccountCustomFieldDataLink String True The AccountCustomFieldDataLink column of the Accounts table.
ContactEmailsLink String True The ContactEmailsLink column of the Accounts table.
EmailActivitiesLink String True The EmailActivitiesLink column of the Accounts table.
NotesLink String True The NotesLink column of the Accounts table.
Name String False Account's name.
UpdatedTimestamp Datetime True The UpdatedTimestamp column of the Accounts table.

ContactCustomFieldData

Create, modify, delete and query the available contact custom field data in ActiveCampaign.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM ContactCustomFieldData WHERE Id = 10003

SELECT * FROM ContactCustomFieldData WHERE FieldValue = 'custom field value'
Insert

Inserting a contact custom field data requires specifying a value for the ContactId, FieldId, FieldValue columns.

Additionally, the connector supports inserting contact custom fields data from the Contacts table. See Contacts for more information.

INSERT INTO ContactCustomFieldData (FieldValue, FieldId, ContactId) VALUES ('custom field value', 1, 5)
Update

The connector supports updating contact custom field data information. Updating contact custom field data requires specifying a value for the Id, ContactId and FieldId columns.

Additionally, it is possible to update contact custom fields data from the Contacts table.

UPDATE ContactCustomFieldData SET FieldValue = 'custom field value' WHERE ID = 8 AND ContactId = 3 AND FieldId = 2"
Delete

The connector supports removing contact custom field data.

DELETE FROM ContactCustomFieldData WHERE ID = 10
Columns
Name Type ReadOnly Description
Id [KEY] String False The ID column of the ContactCustomFieldData table.
CDate Datetime False The CDate column of the ContactCustomFieldData table.
ContactId String False The ContactId column of the ContactCustomFieldData table.
CustomFieldName String True The name of the custom field metum the field value relates to.
FieldId String False ID of the field the value belongs to.
FieldLink String False The FieldLink column of the ContactCustomFieldData table.
OwnerLink String False The OwnerLink column of the ContactCustomFieldData table.
Owner String False The Owner column of the ContactCustomFieldData table.
Udate Datetime False The Udate column of the ContactCustomFieldData table.
FieldValue String False Value of the custom field for a specific contact.

Contacts

View many or all contacts by including their ID's or various filters.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Contacts WHERE Id = 10

SELECT * FROM Contacts WHERE Udate >= '2019-06-30T10:44:34-05:00'

SELECT * FROM Contacts WHERE Udate <= '2021-06-30T10:44:34-05:00'

SELECT * FROM Contacts WHERE Cdate >= '2019-06-30T10:44:34-05:00' AND Cdate <= '2021-06-30T10:44:34-05:00'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the ContactCustomFieldData table.

Insert

Inserting a contact requires specifying the contact email.

INSERT INTO Contacts (Email) VALUES ('testcontact@test.com')

INSERT INTO Contacts (Email, FirstName, LastName, Phone) VALUES ('test@test.com', 'test', 'test', 'contactphonenumber')

Additionally, the connector supports inserting contact and contact custom fields data from the Contacts table. All custom field columns start with CF_.

INSERT INTO Contacts (Name, CF_Description, CF_Hidden, CF_Number) VALUES ('testcontact3', 'custom field value', 'custom field value', 123)
Update

The connector supports updating contact information.

Additionally, it is possible to update contact custom fields data from the Contacts table.

UPDATE Contacts SET FirstName = 'updatedName' WHERE Id = 1

UPDATE Contacts SET CF_CustomField1 = 'custom field value', CF_CustomField2 = 'custom field value' WHERE ID = 1
Bulk Import Contacts

The connector supports uploading large numbers of contacts into your account. This operation includes:

  • Creating new contacts
  • Updating existing contacts
  • Subscribing and unsubscribing from lists

Contacts are imported in batches of up to 250 items. The importer is not recommended to be used for a small number of contacts. You can import contacts as below:

INSERT INTO Contacts#TEMP (Email) VALUES ('email1@test.com')

INSERT INTO Contacts#TEMP (Email) VALUES ('email2@test.com')

UPSERT INTO Contacts (Email) SELECT Email FROM Contacts#TEMP

Additionally, the connector supports BULK INSERT for the Contacts table. Please note this operation will cause a cost in performance as the connector validates if the submitted contacts exist before importing them.

INSERT INTO Contacts#TEMP (Email) VALUES ('email1@test.com')

INSERT INTO Contacts#TEMP (Email) VALUES ('email2@test.com')

INSERT INTO Contacts (Email) SELECT Email FROM Contacts#TEMP

To subscribe and unsubscribe contacts from a specific list set a value for the SubscribeTo and/or UnsubcribeFrom columns which accept a comma-separated list of list ids. For example:

INSERT INTO Contacts#TEMP (Email, SubscribeTo, UnsubcribeFrom) VALUES ('email1@test.com', '1,2', '6,12')

INSERT INTO Contacts#TEMP (Email, SubscribeTo, UnsubcribeFrom) VALUES ('email2@test.com', '3,7', '6,1')
UPSERT INTO Contacts (Email, SubscribeTo, UnsubcribeFrom) SELECT Email, SubscribeTo, UnsubcribeFrom FROM Contacts#TEMP

Contacts must meet all the following criteria in order to be created or updated with this API:

  • The imported contacts may not exceed your account limit
  • The contact must have an email address
  • The contact's email address must not be on an exclusion list
  • The contact's email must not be on a list of bounced email addresses
  • The contact must not have unsubscribed to a list that the import would add them to

If contacts do not meet all of these requirements, they will be skipped by the importer.

Delete

Remove all contacts or a contact by specifying the ID of the contact.

DELETE FROM Contacts WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID column of the Contacts table.
Adate Datetime True The Adate column of the Contacts table.
Anonymized String True The Anonymized column of the Contacts table.
BouncedDate String True The BouncedDate column of the Contacts table.
BouncedHard String True The BouncedHard column of the Contacts table.
BouncedSoft String True The BouncedSoft column of the Contacts table.
Cdate Datetime True The Cdate column of the Contacts table.
CreatedBy String True The CreatedBy column of the Contacts table.
CreatedTimestamp Datetime True The CreatedTimestamp column of the Contacts table.
CreatedUtcTimestamp Datetime True The CreatedUtcTimestamp column of the Contacts table.
Deleted String True The Deleted column of the Contacts table.
DeletedAt String True The DeletedAt column of the Contacts table.
Edate Datetime True The Edate column of the Contacts table.
Email String False The Email column of the Contacts table.
EmailDomain String True The EmailDomain column of the Contacts table.
EmailEmpty Boolean True The EmailEmpty column of the Contacts table.
EmailLocal String True The EmailLocal column of the Contacts table.
FirstName String False The FirstName column of the Contacts table.
Gravatar String True The Gravatar column of the Contacts table.
Hash String True The Hash column of the Contacts table.
Ip String True The Ip column of the Contacts table.
LastName String False The LastName column of the Contacts table.
AccountContactsLink String True The AccountContactsLink column of the Contacts table.
AutomationEntryCountsLink String True The AutomationEntryCountsLink column of the Contacts table.
BounceLogsLink String True The BounceLogsLink column of the Contacts table.
ContactAutomationsLink String True The ContactAutomationsLink column of the Contacts table.
ContactDataLink String True The ContactDataLink column of the Contacts table.
ContactDealsLink String True The ContactDealsLink column of the Contacts table.
ContactGoalsLink String True The ContactGoalsLink column of the Contacts table.
ContactListsLink String True The ContactListsLink column of the Contacts table.
ContactLogsLink String True The ContactLogsLink column of the Contacts table.
ContactTagsLink String True The ContactTagsLink column of the Contacts table.
DealsLink String True The DealsLink column of the Contacts table.
FieldValuesLink String True The FieldValuesLink column of the Contacts table.
GeoIpsLink String True The GeoIpsLink column of the Contacts table.
NotesLink String True The NotesLink column of the Contacts table.
OrganizationLink String True The OrganizationLink column of the Contacts table.
PlusAppendLink String True The PlusAppendLink column of the Contacts table.
ScoreValuesLink String True The ScoreValuesLink column of the Contacts table.
TrackingLogsLink String True The TrackingLogsLink column of the Contacts table.
Organization String True The Organization column of the Contacts table.
Orgname String True The Orgname column of the Contacts table.
Phone String False The Phone column of the Contacts table.
RatingTStamp String True The RatingTStamp column of the Contacts table.
SegmentioId String True The SegmentioId column of the Contacts table.
Sentcnt String True The Sentcnt column of the Contacts table.
SocialdataLastcheck String True The SocialdataLastcheck column of the Contacts table.
Ua String True The Ua column of the Contacts table.
Udate Datetime True The Udate column of the Contacts table.
UpdatedTimestamp String True The UpdatedTimestamp column of the Contacts table.
Updated_by String True The Updated_by column of the Contacts table.
SubscribeTo String False Comma-separated list of list Ids to subscribe a contact to.
UnsubscribeFrom String False Comma-separated list of list Ids to unsubscribe a contact from.

DealCustomFieldData

Create, modify, delete and query the available deal custom field data in ActiveCampaign.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealCustomFieldData WHERE Id = 10003

SELECT * FROM DealCustomFieldData WHERE DealId = 1
Insert

Inserting a deal custom field data requires specifying a value for the DealId, CustomFieldId, and FieldValue columns.

Additionally, the connector supports inserting deal custom fields data from the Deals table. See Deals for more information.

INSERT INTO DealCustomFieldData (FieldValue, CustomFieldId, DealId) VALUES ('custom field value', 1, 5)
Update

The connector supports updating deal custom field data information. Updating deal custom field data requires specifying a value for the Id, DealId and CustomFieldId columns.

Additionally, it is possible to update deal custom fields data from the Deals table.

UPDATE DealCustomFieldData SET FieldValue = 'custom field value' WHERE ID = 8 AND DealId = 3 AND CustomFieldId = 2
Delete

The connector supports removing deal custom field data.

DELETE FROM DealCustomFieldData WHERE ID = 10
Columns
Name Type ReadOnly Description
Id [KEY] String False The ID column of the DealCustomFieldData table.
CreatedTimestamp Datetime False The CreatedTimestamp column of the DealCustomFieldData table.
CustomFieldName String True The name of the custom field metum the field value relates to.
CustomFieldId Integer False The CustomFieldId column of the DealCustomFieldData table.
DealCustomFieldMetumId Integer False The DealCustomFieldMetumId column of the DealCustomFieldData table.
DealId Integer False The DealId column of the DealCustomFieldData table.
FieldValue String False The FieldValue column of the DealCustomFieldData table.
DealLink String False The DealLink column of the DealCustomFieldData table.
DealCustomFieldMetumLink String False The DealCustomFieldMetumLink column of the DealCustomFieldData table.
UpdatedTimestamp Datetime False The UpdatedTimestamp column of the DealCustomFieldData.
FieldCurrency String False Value of the custom field currency type for a specific deal. This field is required when inserting currency custom fields.
FieldType String False Value of the custom field currency type for a specific deal. This field is required when inserting currency custom fields.

DealGroups

Lists all existing accounts.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealGroups WHERE Id = 10003

SELECT * FROM DealGroups WHERE Title = 'title'
Insert

Inserting a pipeline/dealgroup requires specifying a value for the Currency, Title columns.

INSERT INTO DealGroups (Currency, Title) VALUES (2, 300)

INSERT INTO DealGroups (Currency, Title, AutoAssign, AllUsers, AllGroups) VALUES ('USD', 'title', 1, 0, 1)
Update

The connector supports updating pipeline/dealgroup information.

UPDATE DealGroups SET AllUsers = 0, AllGroups = 1, Currency = 'EUR' WHERE Id = 1
Delete

Remove all pipelines or a pipeline by specifying the ID of the dealgroup.

DELETE FROM DealGroups WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The pipeline Id.
AllGroups String False The AllGroups column of the DealGroups table. Indicates whether all user groups have permission to manage this pipeline. Can be either 1 or 0. If 1, all user groups can manage this pipeline. If 0, only user groups in dealGroup.groups parameter can manage this pipeline.
AllUsers String False The AllUsers column of the DealGroups table. Indicates whether new deals get auto-assigned to all users. Can be either 1 or 0. If 1, new deals are auto-assigned to all users unless auto-assign is disabled. If 0, new deals are auto-assigned to only the users in dealGroup.users parameter.
AutoAssign String False The AutoAssign column of the DealGroups table. Deal auto-assign option. Can be one of 0, 1, and 2. If 0, auto-assign is disabled. If 1, Round Robin method is used to auto-assign new deals. If 2, deals are distributed based on deal values.
Cdate Datetime True The Cdate column of the DealGroups table.
Currency String False The Currency column of the DealGroups table.
DealGroupGroupsLink String True The DealGroupGroupsLink column of the DealGroups table.
DealGroupUsersLink String True The DealGroupUsersLink column of the DealGroups table.
StagesLink String True The StagesLink column of the DealGroups table.
Stages String True The Stages column of the DealGroups table.
Title String False Pipeline's title.
Udate Datetime True The Udate column of the DealGroups table.

Deals

Usage information for the operation Deals.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Deals WHERE Id = 10

SELECT * FROM Deals WHERE GroupId = 1

SELECT * FROM Deals WHERE OwnerId = 1

SELECT * FROM Deals WHERE Stage = 1 AND Title = 'title'

As a note, due to server-side performance issues, even when the property IncludeCustomFields is set to TRUE, the custom fields will appear only in the table schema with null values. To retrieve the values of the custom fields, please refer to the DealCustomFieldData table.

Insert

Inserting a deal requires specifying a value for the GroupId, Stage, OwnerId, Title, Value, Currency columns and a value for AccountId or ContactId column.

INSERT INTO Deals (AccountId, GroupId, Stage, OwnerId, Title, Value, Currency) VALUES (1, 1, 1, 1, 'title', 100, 'USD')

INSERT INTO Deals (Email, FirstName, LastName, Phone) VALUES ('test@test.com', 'test', 'test', 'dealphonenumber')

Additionally, the connector supports inserting deal and deal custom fields data from the Deals table. All custom field columns start with CF_.

INSERT INTO Deals (AccountId, GroupId, Stage, OwnerId, Title, Value, Currency, CF_CustomField1, CF_CustomField2, CF_CustomField3) VALUES (1, 1, 1, 1, 'title', 100, 'USD', 'value', 'value', 'value')
Update

The connector supports updating deal information.

Additionally, it is possible to update deal custom fields data from the Deals table.

UPDATE Deals SET Title = 'updatedTitle' WHERE Id = 1

UPDATE Deals SET CF_CustomField1 = 'custom field value', CF_CustomField2 = 'custom field value' WHERE ID = 1
Delete

Remove all deals or a deal by specifying the ID of the deal.

DELETE FROM Deals

DELETE FROM Deals WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID column of the Deals table.
AccountId String False The AccountId column of the Deals table.
ActivityCount String True The ActivityCount column of the Deals table.
Cdate Datetime True The Cdate column of the Deals table.
ContactId String False Deal's primary contact's Id.
Currency String False Deal's currency in 3-digit ISO format, lowercased.
CustomerAccount String True The CustomerAccount column of the Deals table.
Description String False The Description column of the Deals table.
Edate String True The Edate column of the Deals table.
Group String False Deal's pipeline Id. Required if deal.stage is not provided. If deal.group is not provided, the stage's pipeline will be assigned to the deal automatically.
Hash String True The Hash column of the Deals table.
IsDisabled String True The IsDisabled column of the Deals table.
AccountLink String True The AccountLink column of the Deals table.
ContactLink String True The ContactLink column of the Deals table.
ContactDealsLink String True The ContactDealsLink column of the Deals table.
CustomerAccountLink String True The CustomerAccountLink column of the Deals table.
DealActivitiesLink String True The DealActivitiesLink column of the Deals table.
DealCustomFieldDataLink String True The DealCustomFieldDataLink column of the Deals table.
GroupLink String True The GroupLink column of the Deals table.
NextTaskLink String True The NextTaskLink column of the Deals table.
NotesLink String True The NotesLink column of the Deals table.
OrganizationLink String True The OrganizationLink column of the Deals table.
OwnerLink String True The OwnerLink column of the Deals table.
ScoreValuesLink String True The ScoreValuesLink column of the Deals table.
StageLink String True The StageLink column of the Deals table.
TasksLink String True The TasksLink column of the Deals table.
Mdate Datetime True The Mdate column of the Deals table.
NextTask String True The NextTask column of the Deals table.
NextDate Datetime True The NextDate column of the Deals table.
NextDealId String True The NextDealId column of the Deals table.
NextTaskId String True The NextTaskId column of the Deals table.
Organization String True The Organization column of the Deals table.
Owner String False Deal's owner Id. Required if pipeline's auto-assign option is disabled.
Percent String False The Percent column of the Deals table.
Stage String False Deal's stage Id. Required if deal.group is not provided. If deal.stage is not provided, the deal will be assigned with the first stage in the pipeline provided in deal.group.
Status String False The Status column of the Deals table.
Title String False The Title column of the Deals table.
Value String False Deal's value in cents.
WinProbability Integer True The WinProbability column of the Deals table.
WinProbabilityMdate Datetime True The WinProbabilityMdate column of the Deals table.

DealStages

Usage information for the operation DealStages.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM DealStages WHERE Id = 10003

SELECT * FROM DealStages WHERE Title = 'title' AND GroupId = 1
Insert

Inserting a stage requires specifying a value for the GroupId, Title columns.

INSERT INTO DealStages (GroupId, Title) VALUES (2, 'title')

INSERT INTO DealStages (Title, GroupId, OrderId, CardRegion3, Color, Width) VALUES ('TestStage', 1, 2, 'hide-avatar', '434343', '280')
Update

The connector supports updating stage/dealstage information.

UPDATE DealStages SET Title = 'updatedTitle' WHERE Id = 1
Delete

Remove all stages or a stage by specifying the ID of the stage.

DELETE FROM DealStages WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID column of the DealStages table.
CardRegion1 String False The CardRegion1 column of the DealStages table. Indicates what to show in upper-left corner of Deal Cards.
CardRegion2 String False The CardRegion2 column of the DealStages table. Indicates what to show in upper-right corner of Deal Cards.
CardRegion3 String False The CardRegion3 column of the DealStages table. Indicates whether to show the avatar in Deal Cards. Can be one of show-avatar and hide-avatar. If set to show-avatar, deal cards will show the avatars. If set to hide-avatar, deal cards will hide the avatars.
CardRegion4 String False The CardRegion4 column of the DealStages table. Indicates what to show next to the avatar in Deal Cards.
CardRegion5 String False The CardRegion5 column of the DealStages table. Indicates what to show in lower-right corner of Deal Cards.
Cdate Datetime True The Cdate column of the DealStages table.
Color String False Deal Stage's color. 6-character HEX color code without the hashtag. e.g. 434343 to assign the hex color value #434343.
DealOrder String False Option and direction to be used to sort deals in the deal stage. The option and direction should be delimited by a space. Direction can be either.
GroupId String False The GroupId column of the DealStages table.
GroupLink String True The GroupLink column of the DealStages table.
OrderId String False The OrderId column of the DealStages table.
Title String False The Title column of the DealStages table.
Udate Datetime True The Udate column of the DealStages table.
Width String False Deal stage's width in pixels, without px unit.

Tasks

Lists all existing accounts.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Tasks WHERE Id = 10003

SELECT * FROM Tasks WHERE DealTaskType = 1

SELECT * FROM Tasks WHERE DueDate >= '2019-06-30T10:44:34-05:00'

SELECT * FROM Tasks WHERE DueDate <= '2021-06-30T10:44:34-05:00'

SELECT * FROM Tasks WHERE OutcomeId = 1 AND RelId = 1 AND Status = 1
Insert

Inserting a stage requires specifying a value for the DealTaskType, DueDate, Relid columns.

INSERT INTO Tasks (DealTaskType, DueDate, Relid) VALUES (2, '2021-06-30T10:44:34-05:00', 7)
Update

The connector supports updating stage/dealstage information.

UPDATE Tasks SET Title = 'updatedTitle' WHERE Id = 1
Delete

Remove all stages or a stage by specifying the ID of the stage.

DELETE FROM Tasks WHERE ID = 10003
Columns
Name Type ReadOnly Description
Id [KEY] String True The ID column of the Tasks table.
Assignee String False The Assignee column of the Tasks table.
Automation String True The Automation column of the Tasks table.
Cdate Datetime True The Cdate column of the Tasks table.
DealTaskType String False The type of the task based on the available Task Types in the account.
DoneAutomation String False The DoneAutomation column of the Tasks table.
DueDate Datetime False Due date of the task.
Edate Datetime True The Edate column of the Tasks table.
ActivitiesLink String True The ActivitiesLink column of the Tasks table.
AssigneeLink String True The AssigneeLink column of the Tasks table.
AutomationLink String True The AutomationLink column of the Tasks table.
DealTasktypeLink String True The DealTasktypeLink column of the Tasks table.
DoneAutomationLink String True The DoneAutomationLink column of the Tasks table.
NotesLink String True The NotesLink column of the Tasks table.
OwnerLink String True The OwnerLink column of the Tasks table.
TaskNotificationsLink String True The TaskNotificationsLink column of the Tasks table.
UserLink String True The UserLink column of the Tasks table.
Note String False The content describing the task.
OutcomeId Integer False The OutcomeId column of the Tasks table.
OutcomeInfo String False The OutcomeInfo column of the Tasks table.
OwnerId String True The OwnerId column of the Tasks table.
OwnerType String False The name of the relating object. Valid values are contact or deal.
Relid String False The ID of the relational object for this task.
Reltype String True The Reltype column of the Tasks table.
Status Integer False The Status column of the Tasks table. 1 is complete and 0 is incomplete..
Title String False The Title column of the Tasks table.
Udate Datetime True The Udate column of the Tasks table.
User String True The User column of the Tasks table.

Views

Views are similar to tables in the way that data is represented; however, views are read-only.

Queries can be executed against a view as if it were a normal table.

Jitterbit Connector for ActiveCampaign Views

Name Description
Addresses Usage information for the operation Addresses.rsd.
Automations Usage information for the operation Automations.rsd.
Campaigns Query the campaigns information in ActiveCampaign.
ContactAutomations View many or all contacts by including their ID's or various filters.
ContactLists Retrieve ContactList for each contact Group or for the specific Contact group.
ContactTags Retrieve tags added for each contact or for the specific Contact Id
DealActivities Retrieve Deal Activities for each Deal or for the specific Deal Id.
Lists Usage information for the operation Lists.rsd.
Scores View many or all contacts by including their ID's or various filters.
Tags View many or all tags by including their ID's or various filters.
TrackingLogs Retrieve trackingLogs for the specific contact or all contacts
Users Usage information for the operation Users.rsd.

Addresses

Usage information for the operation Addresses.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM AccountContacts WHERE Id = 10003
Columns
Name Type Description
Id String The ID column of the Addresses table.
Address1 String The Address1 column of the Addresses table.
Address2 String The Address2 column of the Addresses table.
Allgroup String The Allgroup column of the Addresses table.
City String The City column of the Addresses table.
CompanyName String The CompanyName column of the Addresses table.
Country String The Country column of the Addresses table.
District String The District column of the Addresses table.
isDefault String The isDefault column of the Addresses table.
AddressGroupLink String The AddressGroupLink column of the Addresses table.
AddressListLink String The AddressListLink column of the Addresses table.
FormsLink String The FormsLink column of the Addresses table.
State String The State column of the Addresses table.
Zip String The Zip column of the Addresses table.

Automations

Usage information for the operation Automations.rsd.

Columns
Name Type Description
Id String The ID column of the Automations table.
Cdate Datetime The Cdate column of the Automations table.
DefaultScreenshot String The DefaultScreenshot column of the Automations table.
Entered String The Entered column of the Automations table.
Exited String The Exited column of the Automations table.
Hidden String The Hidden column of the Automations table.
BlocksLink String The BlocksLink column of the Automations table.
CampaignsLink String The CampaignsLink column of the Automations table.
ContactAutomationsLink String The ContactAutomationsLink column of the Automations table.
ContactGoalsLink String The ContactGoalsLink column of the Automations table.
GoalsLink String The GoalsLink column of the Automations table.
SiteMessagesLink String The SiteMessagesLink column of the Automations table.
SmsLink String The SmsLink column of the Automations table.
Mdate Datetime The Mdate column of the Automations table.
Name String The Name column of the Automations table.
Screenshot String The Screenshot column of the Automations table.
Status String The Status column of the Automations table.
UserId String The UserId column of the Automations table.

Campaigns

Query the campaigns information in ActiveCampaign.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Campaigns WHERE Id = 10003
Columns
Name Type Description
Id [KEY] String The ID column of the Campaigns table.
ActiveRssInterval String The ActiveRssInterval column of the Campaigns table.
ActiveRssItems String The ActiveRssItems column of the Campaigns table.
ActiveRssUrl String The ActiveRssUrl column of the Campaigns table.
AddressId String The AddressId column of the Campaigns table.
AnalyticsCampaignName String The AnalyticsCampaignName column of the Campaigns table.
Automation String The Automation column of the Campaigns table.
BaseMessageId String The BaseMessageId column of the Campaigns table.
BaseTemplateId String The BaseTemplateId column of the Campaigns table.
BounceId String The BounceId column of the Campaigns table.
CanSkipApproval String The can_skip_approval column of the Campaigns table.
Cdate Datetime The Cdate column of the Campaigns table.
CreatedBy String The Created By column of the Campaigns table.
CreatedTimestamp Datetime The Created Timestamp column of the Campaigns table.
DeleteStamp String The DeleteStamp column of the Campaigns table.
EmbedImages String The EmbedImages column of the Campaigns table.
Facebook String The Facebook column of the Campaigns table.
FormId String The FormId column of the Campaigns table.
Forwards String The Forwards column of the Campaigns table.
HardBounces String The HardBounces column of the Campaigns table.
HasPredictiveContent Bit The HasPredictiveContent column of the Campaigns table.
HtmlUnsub String The HtmlUnsub column of the Campaigns table.
HtmlUnsubdata String The HtmlUnsubdata column of the Campaigns table.
Ip String The Ip column of the Campaigns table.
Ip4 String The Ip4 column of the Campaigns table.
LastStep String The LastStep column of the Campaigns table.
Ldate String The Ldate column of the Campaigns table.
LinkClicks String The LinkClicks column of the Campaigns table.
AutomationLink String The AutomationLink column of the Campaigns table.
CampaignAggregateRevenuesLink String The AggregateRevenues column of the Campaigns table.
CampaignListsLink String The CampaignListsLink column of the Campaigns table.
CampaignMessageLink String The CampaignMessageLink column of the Campaigns table.
CampaignMessagesLink String The CampaignMessagesLink column of the Campaigns table.
LinksLink String The LinksLink column of the Campaigns table.
LinksSegment String The Segment column of the Campaigns table.
UserLink String The UserLink column of the Campaigns table.
MailCleanup String The MailCleanup column of the Campaigns table.
MailSend String The MailSend column of the Campaigns table.
MailTransfer String The MailTransfer column of the Campaigns table.
MailerLogFile String The MailerLogFile column of the Campaigns table.
ManageText String The ManageText column of the Campaigns table.
Mdate Datetime The Mdate column of the Campaigns table.
Name String The Name column of the Campaigns table.
Opens String The Opens column of the Campaigns table.
Public String The Public column of the Campaigns table.
RealCid String The RealCid column of the Campaigns table.
Recurring String The Recurring column of the Campaigns table.
ReminderField String The ReminderField column of the Campaigns table.
ReminderFormat String The ReminderFormat column of the Campaigns table.
ReminderLastCronRun String The ReminderLastCronRun column of the Campaigns table.
ReminderOffset String The ReminderOffset column of the Campaigns table.
ReminderOffsetSign String The ReminderOffsetSign column of the Campaigns table.
ReminderOffsetType String The ReminderOffsetType column of the Campaigns table.
ReminderType String The ReminderType column of the Campaigns table.
Replies String The Replies column of the Campaigns table.
ReplySys String The ReplySys column of the Campaigns table.
ResponderExisting String The ResponderExisting column of the Campaigns table.
ResponderOffset String The ResponderOffset column of the Campaigns table.
ResponderType String The ResponderType column of the Campaigns table.
Schedule String The Schedule column of the Campaigns table.
ScheduledDate String The ScheduledDate column of the Campaigns table.
Screenshot String The Screenshot column of the Campaigns table.
Sdate String The Sdate column of the Campaigns table.
SegmentId String The SegmentId column of the Campaigns table.
SegmentName String The SegmentName column of the Campaigns table.
SendAmt String The SendAmt column of the Campaigns table.
SendId String The SendId column of the Campaigns table.
SeriesId String The SeriesId column of the Campaigns table.
Series Send Lock Time String The SeriesSendLockTime column of the Campaigns table.
SocialShares String The SocialShares column of the Campaigns table.
SoftBounces String The SoftBounces column of the Campaigns table.
Source String The Source column of the Campaigns table.
SplitContent String The SplitContent column of the Campaigns table.
SplitOffset String The SplitOffset column of the Campaigns table.
SplitOffsetType String The SplitOffsetType column of the Campaigns table.
SplitType String The SplitType column of the Campaigns table.
SplitWinnerAwaiting String The SplitWinnerAwaiting column of the Campaigns table.
SplitWinnerMessageId String The SplitWinnerMessageId column of the Campaigns table.
Status String The Status column of the Campaigns table.
SubscriberClicks String The SubscriberClicks column of the Campaigns table.
Survey String The Survey column of the Campaigns table.
TextUnsub String The TextUnsub column of the Campaigns table.
TextUnsubData String The TextUnsubData column of the Campaigns table.
ThreadId String The ThreadId column of the Campaigns table.
TotalAmt String The TotalAmt column of the Campaigns table.
TrackLinks String The TrackLinks column of the Campaigns table.
TrackLinksAnalytics String The TrackLinksAnalytics column of the Campaigns table.
TrackReads String The TrackReads column of the Campaigns table.
TrackReadsAnalytics String The TrackReadsAnalytics column of the Campaigns table.
Tweet String The Tweet column of the Campaigns table.
Type String The Type column of the Campaigns table.
UniqueForwards String The UniqueForwards column of the Campaigns table.
UniqueLinkClicks String The UniqueLinkClicks column of the Campaigns table.
UniqueOpens String The UniqueOpens column of the Campaigns table.
UniqueReplies String The UniqueReplies column of the Campaigns table.
UnsubReasons String The UnsubReasons column of the Campaigns table.
Unsubscribes String The Unsubscribes column of the Campaigns table.
Updated By String The UpdatedBy column of the Campaigns table.
Updated Timestamp String The UpdatedTimestamp column of the Campaigns table.
Updates String The Updates column of the Campaigns table.
User String The User column of the Campaigns table.
UserId String The UserId column of the Campaigns table.
WaitPreview String The WaitPreview column of the Campaigns table.
WillRecur String The WillRecur column of the Campaigns table.

ContactAutomations

View many or all contacts by including their ID's or various filters.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM ContactAutomations WHERE Id = 10003
Columns
Name Type Description
Id String The ID column of the ContactAutomations table.
Adddate Datetime The Adddate column of the ContactAutomations table.
Automation String The Automation column of the ContactAutomations table.
Batchid Unknown The Batchid column of the ContactAutomations table.
CompleteValue Integer The CompleteValue column of the ContactAutomations table.
Completed Integer The Completed column of the ContactAutomations table.
CompletedElements String The CompletedElements column of the ContactAutomations table.
ContactId String The ContactId column of the ContactAutomations table.
Lastblock String The Lastblock column of the ContactAutomations table.
Lastdate Datetime The Lastdate column of the ContactAutomations table.
LastLogId String The LastLogId column of the ContactAutomations table.
AutomationLink String The AutomationLink column of the ContactAutomations table.
ContactLink String The ContactLink column of the ContactAutomations table.
ContactGoalsLink String The ContactGoalsLink column of the ContactAutomations table.
Remdate Datetime The Remdate column of the ContactAutomations table.
SeriesId String The SeriesId column of the ContactAutomations table.
StartId String The StartId column of the ContactAutomations table.
Status String The Status column of the ContactAutomations table.
TimeSpan String The TimeSpan column of the ContactAutomations table.
TotalElements String The TotalElements column of the ContactAutomations table.

ContactLists

Retrieve ContactList for each contact Group or for the specific Contact group.

Table Specific Information
Select

Retrieving information from ContactLists requires specifying a ContactId.

SELECT * FROM ContactLists WHERE ContactId = 1000
Columns
Name Type Description
Id [KEY] String The ID column of the ContactLists table.
ContactId String The ContactId column of the ContactLists table.
AutomationId String The AutomationId column of the ContactLists table.
AutosyncLog String The AutosyncLog column of the ContactLists table.
Campaign String The Campaign column of the ContactLists table.
CreatedBy String The CreatedBy column of the ContactLists table.
CreatedTimestamp Datetime The CreatedTimestamp column of the ContactLists table.
FirstName String The FirstName column of the ContactLists table.
Form String The Form column of the ContactLists table.
Ip4Sub String The Ip4Sub column of the ContactLists table.
Ip4Unsub String The Ip4Unsub column of the ContactLists table.
Ip4Last String The Ip4Last column of the ContactLists table.
LastName String The LastName column of the ContactLists table.
AutomationLink String The AutomationLink column of the ContactLists table.
AutosyncLogLink String The AutosyncLogLink column of the ContactLists table.
CampaignLink String The CampaignLink column of the ContactLists table.
ContactLink String The ContactLink column of the ContactLists table.
FormLink String The FormLink column of the ContactLists table.
ListLink String The ListLink column of the ContactLists table.
MessageLink String The MessageLink column of the ContactLists table.
UnsubscribeAutomationLink String The UnsubscribeAutomationLink column of the ContactLists table.
ListId String The ListId column of the ContactLists table.
Message String The Message column of the ContactLists table.
Responder String The Responder column of the ContactLists table.
Sdate Datetime The Sdate column of the ContactLists table.
SeriesId String The SeriesId column of the ContactLists table.
Status String The Status column of the ContactLists table.
SourceId String The SourceId column of the ContactLists table.
Sync String The Sync column of the ContactLists table.
Unsubreason String The Unsubreason column of the ContactLists table.
UnsubscribeAutomation String The UnsubscribeAutomation column of the ContactLists table.
UpdatedBy String The UpdatedBy column of the ContactLists table.
UpdatedTimestamp Datetime The UpdatedTimestamp column of the ContactLists table.

ContactTags

Retrieve tags added for each contact or for the specific Contact Id

Table Specific Information
Select

Retrieving information for ContactTags requires specifying a ContactId.

SELECT * FROM ContactTags WHERE ContactId = 1
Columns
Name Type Description
Id [KEY] String The ID column of the ContactTags table.
ContactId String The ContactId column of the ContactTags table.
Cdate Datetime The Cdate column of the ContactTags table.
CreatedBy String The CreatedBy column of the ContactTags table.
CreatedTimestamp Datetime The CreatedTimestamp column of the ContactTags table.
ContactLink String The ContactLink column of the ContactTags table.
TagLink String The TagLink column of the ContactTags table.
Tag String The Tag column of the ContactTags table.
UpdatedBy String The UpdatedBy column of the ContactTags table.
UpdatedTimestamp Datetime The UpdatedTimestamp column of the ContactTags table.

DealActivities

Retrieve Deal Activities for each Deal or for the specific Deal Id.

Columns
Name Type Description
Id [KEY] String The ID of the activity.
DealId String The ID of the Deal to which the activity belongs to.
StageId String The ID of the Stage to which the parent Deal of the activity belongs to.
UserId String The ID of the User which triggered the activity.
DataId String The ID for the related object (e.g. a Task or Note or similar), if relevant.
DataType String The type of the activity. Examples include 'userid' or 'subscriberid' or 'task' or 'note' or empty quotes ('') for the deal's initial creation.
DataAction String The action taken by this activity. Examples include 'add' or 'complete' or the new value ('100') if the value is changing.
DataOldVal String The previous value, if the value has changed (see DataAction); otherwise, empty quotes ('')
CreatedDate Datetime The creation date of the activity.
SortDate Datetime
IsAddTask Boolean Indicates whether the activity was adding a task to the deal.
Deleted Boolean Indicates whethere the activity was deleted or not.
SeriesId String
DealLink String The API endpoint to the Deal related to this activity.
StageLink String The API endpoint to the Stage related to this activity.
UserLink String The API endpoint to the User related to this activity.
AutomationLink String The API endpoint to the Automation related to this activity.
ActivityLink String The API endpoint to the Activity.
Deal String The related to this Activity.
Stage String The Stage column of the DealActivities table.
User String The User column of the DealActivities table.
Automation String The Automation which triggered this activity.
Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Name Type Description
Exclude String Include this param to exclude 'email', 'connection_email', and 'LinkData' activity types. The allowed values are email.

Lists

Usage information for the operation Lists.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following queries are processed server side:

SELECT * FROM Lists WHERE Id = 1

SELECT * FROM Lists WHERE Name = 'list1'

In addition the connector supports retrieving information about members of lists in your account by supporting them dynamically as VIEWS. Selecting from a dynamic list will return information about all the contacts that are members of that list. Lists names always start with "List_".

Columns
Name Type Description
Id [KEY] String The ID column of the Lists table.
AnalyticsDomains String The AnalyticsDomains column of the Lists table.
AnalyticsSource String The AnalyticsSource column of the Lists table.
AnalyticsUa String The AnalyticsUa column of the Lists table.
CarbonCopy String The CarbonCopy column of the Lists table.
Cdate Datetime The Cdate column of the Lists table.
Udate Datetime The Udate column of the Lists table.
DeleteStamp String The DeleteStamp column of the Lists table.
FacebookSession String The FacebookSession column of the Lists table.
FullAddress String The FullAddress column of the Lists table.
UnsubscribeReason String The UnsubscribeReason column of the Lists table.
AddressListsLink String The AddressListsLink column of the Lists table.
ContactGoalListsLink String The ContactGoalListsLink column of the Lists table.
UserLink String The UserLink column of the Lists table.
Name String The Name column of the Lists table.
OptinMessageId String The OptinMessageId column of the Lists table.
OptinOptout String The OptinOptout column of the Lists table.
OptoutConf String The OptoutConf column of the Lists table.
EmbedImage String The EmbedImage column of the Lists table.
UseAnalyticsLink String The UseAnalyticsLink column of the Lists table.
UseAnalyticsRead String The UseAnalyticsRead column of the Lists table.
UseCaptcha String The UseCaptcha column of the Lists table.
UseFacebook String The UseFacebook column of the Lists table.
UseTracking String The UseTracking column of the Lists table.
UseTwitter String The UseTwitter column of the Lists table.
Private String The Private column of the Lists table.
RequireName String The RequireName column of the Lists table.
SendLastBroadcast String The SendLastBroadcast column of the Lists table.
SenderAddr1 String The SenderAddr1 column of the Lists table.
SenderAddr2 String The SenderAddr2 column of the Lists table.
SenderCity String The SenderCity column of the Lists table.
SenderCountry String The SenderCountry column of the Lists table.
SenderName String The SenderName column of the Lists table.
SenderPhone String The SenderPhone column of the Lists table.
SenderReminder String The SenderReminder column of the Lists table.
SenderState String The SenderState column of the Lists table.
SenderUrl String The SenderUrl column of the Lists table.
SenderZip String The SenderZip column of the Lists table.
StringId String The StringId column of the Lists table.
SubscriptionNotify String The SubscriptionNotify column of the Lists table.
ToName String The ToName column of the Lists table.
TwitterToken String The TwitterToken column of the Lists table.
TwitterTokenSecret String The TwitterTokenSecret column of the Lists table.
UnsubscriptionNotify String The UnsubscriptionNotify column of the Lists table.
ListsUser String The ListsUser column of the Lists table.
ListsUserid String The ListsUserid column of the Lists table.

Scores

View many or all contacts by including their ID's or various filters.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Scores WHERE Id = 10
Columns
Name Type Description
Id String The ID column of the Scores table.
Cdate Datetime The Cdate column of the Scores table.
Descript String The Descript column of the Scores table.
Mdate Datetime The Mdate column of the Scores table.
Name String The Name column of the Scores table.
RelType String The RelType column of the Scores table.
Status String The Status column of the Scores table.

Tags

View many or all tags by including their ID's or various filters.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Tags WHERE Id = 10003
Columns
Name Type Description
Id [KEY] String The ID column of the Tags table.
Tag String The Tag column of the Tags table.
TagType String The TagType column of the Tags table.
Description String The Description column of the Tags table.
Cdate Datetime The Cdate column of the Tags table.
ContactGoalTagsLink String The ContactGoalTagsLink column of the Tags table.

TrackingLogs

Retrieve trackingLogs for the specific contact or all contacts

Columns
Name Type Description
Id [KEY] String The ID column of the TrackingLogs table.
ContactId String The ContactId column of the TrackingLogs table.
Hash String The Hash column of the TrackingLogs table.
ContactLink String The ContactLink column of the TrackingLogs table.
SubscriberidLink String The SubscriberidLink column of the TrackingLogs table.
TstampLink Datetime The TstampLink column of the TrackingLogs table.
TypeLink String The TypeLink column of the TrackingLogs table.
ValueLink String The ValueLink column of the TrackingLogs table.
Pseudo-Columns

Pseudo column fields are used in the WHERE clause of SELECT statements and offer a more granular control over the tuples that are returned from the data source.

Name Type Description
UDateLink Datetime

Users

Usage information for the operation Users.rsd.

Table Specific Information
Select

The connector uses the ActiveCampaign API to process some of the filters.

For example, the following query is processed server side:

SELECT * FROM Users WHERE Id = 10003
Columns
Name Type Description
Id String The ID column of the Users table.
Email String The Email column of the Users table.
FirstName String The FirstName column of the Users table.
LastName String The LastName column of the Users table.
ConfigsLink String The ConfigsLinks column of the Users table.
DealGroupTotalsLink String The DealGroupTotalsLink column of the Users table.
DealGroupUsersLink String The DealGroupUsersLink column of the Users table.
ListsLink String The ListsLink column of the Users table.
UserGroupLink String The UserGroupLink column of the Users table.
Phone Unknown The Phone column of the Users table.
Signature Unknown The Signature column of the Users table.
Username String The Username column of the Users table.

System Tables

You can query the system tables described in this section to access schema information, information on data source functionality, and batch operation statistics.

Schema Tables

The following tables return database metadata for ActiveCampaign:

Data Source Tables

The following tables return information about how to connect to and query the data source:

  • sys_connection_props: Returns information on the available connection properties.
  • sys_sqlinfo: Describes the SELECT queries that the connector can offload to the data source.

Query Information Tables

The following table returns query statistics for data modification queries:

  • sys_identity: Returns information about batch operations or single updates.

sys_catalogs

Lists the available databases.

The following query retrieves all databases determined by the connection string:

SELECT * FROM sys_catalogs
Columns
Name Type Description
CatalogName String The database name.

sys_schemas

Lists the available schemas.

The following query retrieves all available schemas:

SELECT * FROM sys_schemas
Columns
Name Type Description
CatalogName String The database name.
SchemaName String The schema name.

sys_tables

Lists the available tables.

The following query retrieves the available tables and views:

SELECT * FROM sys_tables
Columns
Name Type Description
CatalogName String The database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view.
TableType String The table type (table or view).
Description String A description of the table or view.
IsUpdateable Boolean Whether the table can be updated.

sys_tablecolumns

Describes the columns of the available tables and views.

The following query returns the columns and data types for the Contacts table:

SELECT ColumnName, DataTypeName FROM sys_tablecolumns WHERE TableName='Contacts'
Columns
Name Type Description
CatalogName String The name of the database containing the table or view.
SchemaName String The schema containing the table or view.
TableName String The name of the table or view containing the column.
ColumnName String The column name.
DataTypeName String The data type name.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The storage size of the column.
DisplaySize Int32 The designated column's normal maximum width in characters.
NumericPrecision Int32 The maximum number of digits in numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The column scale or number of digits to the right of the decimal point.
IsNullable Boolean Whether the column can contain null.
Description String A brief description of the column.
Ordinal Int32 The sequence number of the column.
IsAutoIncrement String Whether the column value is assigned in fixed increments.
IsGeneratedColumn String Whether the column is generated.
IsHidden Boolean Whether the column is hidden.
IsArray Boolean Whether the column is an array.
IsReadOnly Boolean Whether the column is read-only.
IsKey Boolean Indicates whether a field returned from sys_tablecolumns is the primary key of the table.

sys_procedures

Lists the available stored procedures.

The following query retrieves the available stored procedures:

SELECT * FROM sys_procedures
Columns
Name Type Description
CatalogName String The database containing the stored procedure.
SchemaName String The schema containing the stored procedure.
ProcedureName String The name of the stored procedure.
Description String A description of the stored procedure.
ProcedureType String The type of the procedure, such as PROCEDURE or FUNCTION.

sys_procedureparameters

Describes stored procedure parameters.

The following query returns information about all of the input parameters for the SelectEntries stored procedure:

SELECT * FROM sys_procedureparameters WHERE ProcedureName='SelectEntries' AND Direction=1 OR Direction=2
Columns
Name Type Description
CatalogName String The name of the database containing the stored procedure.
SchemaName String The name of the schema containing the stored procedure.
ProcedureName String The name of the stored procedure containing the parameter.
ColumnName String The name of the stored procedure parameter.
Direction Int32 An integer corresponding to the type of the parameter: input (1), input/output (2), or output(4). input/output type parameters can be both input and output parameters.
DataTypeName String The name of the data type.
DataType Int32 An integer indicating the data type. This value is determined at run time based on the environment.
Length Int32 The number of characters allowed for character data. The number of digits allowed for numeric data.
NumericPrecision Int32 The maximum precision for numeric data. The column length in characters for character and date-time data.
NumericScale Int32 The number of digits to the right of the decimal point in numeric data.
IsNullable Boolean Whether the parameter can contain null.
IsRequired Boolean Whether the parameter is required for execution of the procedure.
IsArray Boolean Whether the parameter is an array.
Description String The description of the parameter.
Ordinal Int32 The index of the parameter.

sys_keycolumns

Describes the primary and foreign keys.

The following query retrieves the primary key for the Contacts table:

SELECT * FROM sys_keycolumns WHERE IsKey='True' AND TableName='Contacts'
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
IsKey Boolean Whether the column is a primary key in the table referenced in the TableName field.
IsForeignKey Boolean Whether the column is a foreign key referenced in the TableName field.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.

sys_foreignkeys

Describes the foreign keys.

The following query retrieves all foreign keys which refer to other tables:

SELECT * FROM sys_foreignkeys WHERE ForeignKeyType = 'FOREIGNKEY_TYPE_IMPORT'
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
PrimaryKeyName String The name of the primary key.
ForeignKeyName String The name of the foreign key.
ReferencedCatalogName String The database containing the primary key.
ReferencedSchemaName String The schema containing the primary key.
ReferencedTableName String The table containing the primary key.
ReferencedColumnName String The column name of the primary key.
ForeignKeyType String Designates whether the foreign key is an import (points to other tables) or export (referenced from other tables) key.

sys_primarykeys

Describes the primary keys.

The following query retrieves the primary keys from all tables and views:

SELECT * FROM sys_primarykeys
Columns
Name Type Description
CatalogName String The name of the database containing the key.
SchemaName String The name of the schema containing the key.
TableName String The name of the table containing the key.
ColumnName String The name of the key column.
KeySeq String The sequence number of the primary key.
KeyName String The name of the primary key.

sys_indexes

Describes the available indexes. By filtering on indexes, you can write more selective queries with faster query response times.

The following query retrieves all indexes that are not primary keys:

SELECT * FROM sys_indexes WHERE IsPrimary='false'
Columns
Name Type Description
CatalogName String The name of the database containing the index.
SchemaName String The name of the schema containing the index.
TableName String The name of the table containing the index.
IndexName String The index name.
ColumnName String The name of the column associated with the index.
IsUnique Boolean True if the index is unique. False otherwise.
IsPrimary Boolean True if the index is a primary key. False otherwise.
Type Int16 An integer value corresponding to the index type: statistic (0), clustered (1), hashed (2), or other (3).
SortOrder String The sort order: A for ascending or D for descending.
OrdinalPosition Int16 The sequence number of the column in the index.

sys_connection_props

Returns information on the available connection properties and those set in the connection string.

When querying this table, the config connection string should be used:

jdbc:cdata:activecampaign:config:

This connection string enables you to query this table without a valid connection.

The following query retrieves all connection properties that have been set in the connection string or set through a default value:

SELECT * FROM sys_connection_props WHERE Value <> ''
Columns
Name Type Description
Name String The name of the connection property.
ShortDescription String A brief description.
Type String The data type of the connection property.
Default String The default value if one is not explicitly set.
Values String A comma-separated list of possible values. A validation error is thrown if another value is specified.
Value String The value you set or a preconfigured default.
Required Boolean Whether the property is required to connect.
Category String The category of the connection property.
IsSessionProperty String Whether the property is a session property, used to save information about the current connection.
Sensitivity String The sensitivity level of the property. This informs whether the property is obfuscated in logging and authentication forms.
PropertyName String A camel-cased truncated form of the connection property name.
Ordinal Int32 The index of the parameter.
CatOrdinal Int32 The index of the parameter category.
Hierarchy String Shows dependent properties associated that need to be set alongside this one.
Visible Boolean Informs whether the property is visible in the connection UI.
ETC String Various miscellaneous information about the property.

sys_sqlinfo

Describes the SELECT query processing that the connector can offload to the data source.

Discovering the Data Source's SELECT Capabilities

Below is an example data set of SQL capabilities. Some aspects of SELECT functionality are returned in a comma-separated list if supported; otherwise, the column contains NO.

Name Description Possible Values
AGGREGATE_FUNCTIONS Supported aggregation functions. AVG, COUNT, MAX, MIN, SUM, DISTINCT
COUNT Whether COUNT function is supported. YES, NO
IDENTIFIER_QUOTE_OPEN_CHAR The opening character used to escape an identifier. [
IDENTIFIER_QUOTE_CLOSE_CHAR The closing character used to escape an identifier. ]
SUPPORTED_OPERATORS A list of supported SQL operators. =, >, <, >=, <=, <>, !=, LIKE, NOT LIKE, IN, NOT IN, IS NULL, IS NOT NULL, AND, OR
GROUP_BY Whether GROUP BY is supported, and, if so, the degree of support. NO, NO_RELATION, EQUALS_SELECT, SQL_GB_COLLATE
STRING_FUNCTIONS Supported string functions. LENGTH, CHAR, LOCATE, REPLACE, SUBSTRING, RTRIM, LTRIM, RIGHT, LEFT, UCASE, SPACE, SOUNDEX, LCASE, CONCAT, ASCII, REPEAT, OCTET, BIT, POSITION, INSERT, TRIM, UPPER, REGEXP, LOWER, DIFFERENCE, CHARACTER, SUBSTR, STR, REVERSE, PLAN, UUIDTOSTR, TRANSLATE, TRAILING, TO, STUFF, STRTOUUID, STRING, SPLIT, SORTKEY, SIMILAR, REPLICATE, PATINDEX, LPAD, LEN, LEADING, KEY, INSTR, INSERTSTR, HTML, GRAPHICAL, CONVERT, COLLATION, CHARINDEX, BYTE
NUMERIC_FUNCTIONS Supported numeric functions. ABS, ACOS, ASIN, ATAN, ATAN2, CEILING, COS, COT, EXP, FLOOR, LOG, MOD, SIGN, SIN, SQRT, TAN, PI, RAND, DEGREES, LOG10, POWER, RADIANS, ROUND, TRUNCATE
TIMEDATE_FUNCTIONS Supported date/time functions. NOW, CURDATE, DAYOFMONTH, DAYOFWEEK, DAYOFYEAR, MONTH, QUARTER, WEEK, YEAR, CURTIME, HOUR, MINUTE, SECOND, TIMESTAMPADD, TIMESTAMPDIFF, DAYNAME, MONTHNAME, CURRENT_DATE, CURRENT_TIME, CURRENT_TIMESTAMP, EXTRACT
REPLICATION_SKIP_TABLES Indicates tables skipped during replication.
REPLICATION_TIMECHECK_COLUMNS A string array containing a list of columns which will be used to check for (in the given order) to use as a modified column during replication.
IDENTIFIER_PATTERN String value indicating what string is valid for an identifier.
SUPPORT_TRANSACTION Indicates if the provider supports transactions such as commit and rollback. YES, NO
DIALECT Indicates the SQL dialect to use.
KEY_PROPERTIES Indicates the properties which identify the uniform database.
SUPPORTS_MULTIPLE_SCHEMAS Indicates if multiple schemas may exist for the provider. YES, NO
SUPPORTS_MULTIPLE_CATALOGS Indicates if multiple catalogs may exist for the provider. YES, NO
DATASYNCVERSION The Data Sync version needed to access this driver. Standard, Starter, Professional, Enterprise
DATASYNCCATEGORY The Data Sync category of this driver. Source, Destination, Cloud Destination
SUPPORTSENHANCEDSQL Whether enhanced SQL functionality beyond what is offered by the API is supported. TRUE, FALSE
SUPPORTS_BATCH_OPERATIONS Whether batch operations are supported. YES, NO
SQL_CAP All supported SQL capabilities for this driver. SELECT, INSERT, DELETE, UPDATE, TRANSACTIONS, ORDERBY, OAUTH, ASSIGNEDID, LIMIT, LIKE, BULKINSERT, COUNT, BULKDELETE, BULKUPDATE, GROUPBY, HAVING, AGGS, OFFSET, REPLICATE, COUNTDISTINCT, JOINS, DROP, CREATE, DISTINCT, INNERJOINS, SUBQUERIES, ALTER, MULTIPLESCHEMAS, GROUPBYNORELATION, OUTERJOINS, UNIONALL, UNION, UPSERT, GETDELETED, CROSSJOINS, GROUPBYCOLLATE, MULTIPLECATS, FULLOUTERJOIN, MERGE, JSONEXTRACT, BULKUPSERT, SUM, SUBQUERIESFULL, MIN, MAX, JOINSFULL, XMLEXTRACT, AVG, MULTISTATEMENTS, FOREIGNKEYS, CASE, LEFTJOINS, COMMAJOINS, WITH, LITERALS, RENAME, NESTEDTABLES, EXECUTE, BATCH, BASIC, INDEX
PREFERRED_CACHE_OPTIONS A string value specifies the preferred cacheOptions.
ENABLE_EF_ADVANCED_QUERY Indicates if the driver directly supports advanced queries coming from Entity Framework. If not, queries will be handled client side. YES, NO
PSEUDO_COLUMNS A string array indicating the available pseudo columns.
MERGE_ALWAYS If the value is true, The Merge Mode is forcibly executed in Data Sync. TRUE, FALSE
REPLICATION_MIN_DATE_QUERY A select query to return the replicate start datetime.
REPLICATION_MIN_FUNCTION Allows a provider to specify the formula name to use for executing a server side min.
REPLICATION_START_DATE Allows a provider to specify a replicate startdate.
REPLICATION_MAX_DATE_QUERY A select query to return the replicate end datetime.
REPLICATION_MAX_FUNCTION Allows a provider to specify the formula name to use for executing a server side max.
IGNORE_INTERVALS_ON_INITIAL_REPLICATE A list of tables which will skip dividing the replicate into chunks on the initial replicate.
CHECKCACHE_USE_PARENTID Indicates whether the CheckCache statement should be done against the parent key column. TRUE, FALSE
CREATE_SCHEMA_PROCEDURES Indicates stored procedures that can be used for generating schema files.

The following query retrieves the operators that can be used in the WHERE clause:

SELECT * FROM sys_sqlinfo WHERE Name = 'SUPPORTED_OPERATORS'

Note that individual tables may have different limitations or requirements on the WHERE clause; refer to the Data Model section for more information.

Columns
Name Type Description
NAME String A component of SQL syntax, or a capability that can be processed on the server.
VALUE String Detail on the supported SQL or SQL syntax.

sys_identity

Returns information about attempted modifications.

The following query retrieves the Ids of the modified rows in a batch operation:

SELECT * FROM sys_identity
Columns
Name Type Description
Id String The database-generated ID returned from a data modification operation.
Batch String An identifier for the batch. 1 for a single operation.
Operation String The result of the operation in the batch: INSERTED, UPDATED, or DELETED.
Message String SUCCESS or an error message if the update in the batch failed.

Advanced Configurations Properties

The advanced configurations properties are the various options that can be used to establish a connection. This section provides a complete list of the options you can configure. Click the links for further details.

Authentication

Property Description
APIKey The APIKey obtained from the ActiveCampaign UI.
URL Base URL which is used to access the API.

SSL

Property Description
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

Schema

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Miscellaneous

Property Description
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other These hidden properties are used only in specific use cases.
Pagesize The maximum number of results to return per page from ActiveCampaign.
PseudoColumns This property indicates whether or not to include pseudo columns as columns to the table.
Timeout The value in seconds until the timeout error is thrown, canceling the operation.
UserDefinedViews A filepath pointing to the JSON configuration file containing your custom views.

Authentication

This section provides a complete list of authentication properties you can configure.

Property Description
APIKey The APIKey obtained from the ActiveCampaign UI.
URL Base URL which is used to access the API.

APIKey

The APIKey obtained from the ActiveCampaign UI.

Data Type

string

Default Value

""

Remarks

API key can be found in your account on the Settings page under the "Developer" tab. Each user in your ActiveCampaign account has their own unique API key.

URL

Base URL which is used to access the API.

Data Type

string

Default Value

""

Remarks

URL can be found in your account on the My Settings page under the "Developer" tab. For example: https://{yourAccountName}.api-us1.com

SSL

This section provides a complete list of SSL properties you can configure.

Property Description
SSLServerCert The certificate to be accepted from the server when connecting using TLS/SSL.

SSLServerCert

The certificate to be accepted from the server when connecting using TLS/SSL.

Data Type

string

Default Value

""

Remarks

If using a TLS/SSL connection, this property can be used to specify the TLS/SSL certificate to be accepted from the server. Any other certificate that is not trusted by the machine is rejected.

This property can take the following forms:

Description Example
A full PEM Certificate (example shortened for brevity) -----BEGIN CERTIFICATE----- MIIChTCCAe4CAQAwDQYJKoZIhv......Qw== -----END CERTIFICATE-----
A path to a local file containing the certificate C:\\cert.cer
The public key (example shortened for brevity) -----BEGIN RSA PUBLIC KEY----- MIGfMA0GCSq......AQAB -----END RSA PUBLIC KEY-----
The MD5 Thumbprint (hex values can also be either space or colon separated) ecadbdda5a1529c58a1e9e09828d70e4
The SHA1 Thumbprint (hex values can also be either space or colon separated) 34a929226ae0819f2ec14b4a3d904f801cbb150d

If not specified, any certificate trusted by the machine is accepted.

Certificates are validated as trusted by the machine based on the System's trust store. The trust store used is the 'javax.net.ssl.trustStore' value specified for the system. If no value is specified for this property, Java's default trust store is used (for example, JAVA_HOME\lib\security\cacerts).

Use '*' to signify to accept all certificates. Note that this is not recommended due to security concerns.

Schema

This section provides a complete list of schema properties you can configure.

Property Description
Location A path to the directory that contains the schema files defining tables, views, and stored procedures.
BrowsableSchemas This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA, SchemaB, SchemaC.
Tables This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA, TableB, TableC.
Views Restricts the views reported to a subset of the available tables. For example, Views=ViewA, ViewB, ViewC.

Location

A path to the directory that contains the schema files defining tables, views, and stored procedures.

Data Type

string

Default Value

%APPDATA%\ActiveCampaign Data Provider\Schema

Remarks

The path to a directory which contains the schema files for the connector (.rsd files for tables and views, .rsb files for stored procedures). The folder location can be a relative path from the location of the executable. The Location property is only needed if you want to customize definitions (for example, change a column name, ignore a column, and so on) or extend the data model with new tables, views, or stored procedures.

If left unspecified, the default location is "%APPDATA%\ActiveCampaign Data Provider\Schema" with %APPDATA% being set to the user's configuration directory:

Platform %APPDATA%
Windows The value of the APPDATA environment variable
Mac ~/Library/Application Support
Linux ~/.config

BrowsableSchemas

This property restricts the schemas reported to a subset of the available schemas. For example, BrowsableSchemas=SchemaA,SchemaB,SchemaC.

Data Type

string

Default Value

""

Remarks

Listing the schemas from databases can be expensive. Providing a list of schemas in the connection string improves the performance.

Tables

This property restricts the tables reported to a subset of the available tables. For example, Tables=TableA,TableB,TableC.

Data Type

string

Default Value

""

Remarks

Listing the tables from some databases can be expensive. Providing a list of tables in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the tables you want in a comma-separated list. Each table should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Tables=TableA,[TableB/WithSlash],WithCatalog.WithSchema.`TableC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Views

Restricts the views reported to a subset of the available tables. For example, Views=ViewA,ViewB,ViewC.

Data Type

string

Default Value

""

Remarks

Listing the views from some databases can be expensive. Providing a list of views in the connection string improves the performance of the connector.

This property can also be used as an alternative to automatically listing views if you already know which ones you want to work with and there would otherwise be too many to work with.

Specify the views you want in a comma-separated list. Each view should be a valid SQL identifier with any special characters escaped using square brackets, double-quotes or backticks. For example, Views=ViewA,[ViewB/WithSlash],WithCatalog.WithSchema.`ViewC With Space`.

Note that when connecting to a data source with multiple schemas or catalogs, you will need to provide the fully qualified name of the table in this property, as in the last example here, to avoid ambiguity between tables that exist in multiple catalogs or schemas.

Miscellaneous

This section provides a complete list of miscellaneous properties you can configure.

Property Description
MaxRows Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.
Other These hidden properties are used only in specific use cases.
Pagesize The maximum number of results to return per page from ActiveCampaign.
PseudoColumns This property indicates whether or not to include pseudo columns as columns to the table.
Timeout The value in seconds until the timeout error is thrown, canceling the operation.
UserDefinedViews A filepath pointing to the JSON configuration file containing your custom views.

MaxRows

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Data Type

int

Default Value

-1

Remarks

Limits the number of rows returned when no aggregation or GROUP BY is used in the query. This takes precedence over LIMIT clauses.

Other

These hidden properties are used only in specific use cases.

Data Type

string

Default Value

""

Remarks

The properties listed below are available for specific use cases. Normal driver use cases and functionality should not require these properties.

Specify multiple properties in a semicolon-separated list.

Integration and Formatting
Property Description
DefaultColumnSize Sets the default length of string fields when the data source does not provide column length in the metadata. The default value is 2000.
ConvertDateTimeToGMT Determines whether to convert date-time values to GMT, instead of the local time of the machine.
RecordToFile=filename Records the underlying socket data transfer to the specified file.

Pagesize

The maximum number of results to return per page from ActiveCampaign.

Data Type

int

Default Value

100

Remarks

The Pagesize property affects the maximum number of results to return per page from ActiveCampaign. ActiveCampaign allows a maximum of 100 records to be returned in each page.

PseudoColumns

This property indicates whether or not to include pseudo columns as columns to the table.

Data Type

string

Default Value

""

Remarks

This setting is particularly helpful in Entity Framework, which does not allow you to set a value for a pseudo column unless it is a table column. The value of this connection setting is of the format "Table1=Column1, Table1=Column2, Table2=Column3". You can use the "*" character to include all tables and all columns; for example, "*=*".

Timeout

The value in seconds until the timeout error is thrown, canceling the operation.

Data Type

int

Default Value

60

Remarks

If Timeout = 0, operations do not time out. The operations run until they complete successfully or until they encounter an error condition.

If Timeout expires and the operation is not yet complete, the connector throws an exception.

UserDefinedViews

A filepath pointing to the JSON configuration file containing your custom views.

Data Type

string

Default Value

""

Remarks

User Defined Views are defined in a JSON-formatted configuration file called UserDefinedViews.json. The connector automatically detects the views specified in this file.

You can also have multiple view definitions and control them using the UserDefinedViews connection property. When you use this property, only the specified views are seen by the connector.

This User Defined View configuration file is formatted as follows:

  • Each root element defines the name of a view.
  • Each root element contains a child element, called query, which contains the custom SQL query for the view.

For example:

{
    "MyView": {
        "query": "SELECT * FROM Contacts WHERE MyColumn = 'value'"
    },
    "MyView2": {
        "query": "SELECT * FROM MyTable WHERE Id IN (1,2,3)"
    }
}

Use the UserDefinedViews connection property to specify the location of your JSON configuration file. For example:

"UserDefinedViews", C:\Users\yourusername\Desktop\tmp\UserDefinedViews.json

Note that the specified path is not embedded in quotation marks.